Product information for the outdoor-installable facial recognition terminal "SmileOkay-HO" has been registered. *Demo/loan available.

Not only can it be installed outdoors, but it also achieves fast and high-precision facial recognition using deep learning algorithms.

The "SmileOkay-HO" is a face recognition terminal that is waterproof and dustproof, making it suitable for installation outdoors as well as indoors. It employs deep learning algorithms to achieve fast and highly accurate face recognition. The recognition time is just 0.2 seconds, with authentication occurring at a distance of 1.5 meters from the camera. It allows for authentication while walking without the need to stop, and the face recognition accuracy is very high at ≧99%. With the utility software developed independently by IT Sec, bulk registration of user data and data transfer for face registration can be easily performed, enabling centralized management of multiple terminals. 【Features】 ■ Non-contact, safe, and secure biometric authentication ■ Suitable for outdoor installation ■ Various options available ■ Rich functionality ■ Authentication possible while walking without stopping ■ Management software developed by our company utilizing our expertise *For more details, please refer to the PDF document or feel free to contact us.

• Entrance and exit control system

Speed up authentication with a 64-bit CPU! Achieve smooth and secure access control and attendance management using iris and facial recognition systems (contactless)!

The facial recognition and iris recognition system 'SmileOkay' provided by "IT Sec" enables smooth and secure entry and exit management as well as attendance management by integrating with multiple attendance systems. We have upgraded the functionality of 'SmileOkay-i' to achieve even faster and more accurate authentication by adopting a 64-bit CPU and a new authentication algorithm. 【Features】 ■ Iris recognition & facial recognition ■ High authentication accuracy ■ High-performance software ■ Various applications possible ■ Temperature measurement & mask wearing assessment ■ Attendance management options *For more details, please refer to the PDF document or feel free to contact us. Demos and rentals are available.

• Entrance and exit control system

A single device can register data for up to 6,000 people! Early detection of feverish individuals helps avoid droplet and contact infections at close range.

"SmileOkay-HT" is a secure entry management system that uses facial recognition and temperature measurement for up to 6,000 registered users. The facial recognition time is just 0.2 seconds, with authentication occurring at a distance of 1.5 meters from the camera. The temperature measurement range is from 30 to 45°C, with a high accuracy of ±0.5°C. With the utility software developed independently by IT Sec, bulk registration of user data and the transfer of facial registration data can be easily performed, allowing for centralized management of multiple devices. 【Features】 ■ Non-contact biometric authentication ■ Instant temperature measurement ■ Diverse options ■ Rich functionality ■ High performance ■ Management software *For more details, please refer to the PDF document or feel free to contact us.

• Entrance and exit control system

Replace non-contact/fingerprint and vein authentication! Utilize iris and facial recognition systems for efficient, smooth, and more accurate attendance management.

"SmileOkay-i" is a secure attendance management system using iris and facial recognition. Unlike traditional fingerprint or vein recognition, it employs non-contact scanning, allowing for verification even when hands are occupied or when wearing gloves, thus reducing time loss and various inefficiencies. In workplaces where employees may work at multiple locations depending on the situation, or where personnel frequently change, managing time cards and authentication cards can become cumbersome. However, our product can solve these challenges. 【Features】 ■ Allows clocking in using only the individual's face, without the need for keys, IC cards, or time cards ■ Hygienic due to its non-contact nature (no concerns about virus transmission, etc.) ■ Not affected by the decrease in recognition rates during winter or fluctuations in temperature (body temperature), unlike vein recognition ■ Compatible with various iris colors ■ Can accommodate sunglasses, glasses, veils, and masks *We are currently accepting requests for demo units! *For more details, please refer to the PDF materials or feel free to contact us.

• Entrance and exit control system

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.