The latest information portal site on asbestos regulation has been opened.

The asbestos level 3 dedicated FREC bag [Relay Bag Long Type] has obtained a patent as a packaging material with a unique belt structure.

Relay bags (Freccon bags) are transport containers designed with environmental measures and waste disposal efficiency in mind. They widely support recycling logistics (sorting, collection, transportation) for separated recyclable resources, recycled materials, and waste. You can choose from a rich lineup depending on the application and contents. The Relay Bag "Long Type" is a transport container that allows for the packaging and transportation of asbestos molded boards such as slate boards, calcium silicate boards, and siding without crushing them. In July 2013, it obtained a patent (No. 5326153) as a packaging material with a unique belt structure. [What is the unique belt structure?] The bag body of the Relay Bag Long Type has 12 belts attached to its four sides, securely holding the contents. During lifting, it allows for easier and faster rigging work without requiring skilled techniques for load balance adjustment. Additionally, this belt structure can be lifted using various heavy machinery with one-point, two-point, or four-point rigging. For more details, please contact us or download the catalog.

• container

Asbestos Level 3 Measures: Special bulk bag for Asbestos Level 3 (for 6-foot use). No scattering during transport as it is not crushed! Increases work efficiency!

The "Long Type" relay bag is a transport container that allows for the packaging and transportation of asbestos molded boards (slate boards, calcium silicate boards, siding) without crushing them, all in a consistent operation. The bag body is equipped with 12 belts attached to four sides, securely holding the contents. During lifting, it enables easier and faster rigging work without requiring skilled techniques for load balance adjustment. Additionally, this belt structure supports both two-point and four-point lifting, allowing it to be lifted by various heavy machinery such as cranes and forklifts. The asbestos treatment achievements using the Long Type have exceeded a cumulative total of 10 million square meters! 【Features】 ■ Transport without crushing This leads to prevention of scattering and reduces effort, achieving two benefits in one. ■ Stable structure The unique belt structure holds from four sides, allowing for speedy rigging work. It also accommodates various heavy machinery for two-point and four-point lifting [patent obtained]. For more details, please contact us or download the catalog.

• Other environmental equipment
• container
• Packaging materials

Asbestos Level 3 Measures: Special FREC for Asbestos Level 3 (for 8-foot use). Since it is transported without crushing, there is no scattering! Work efficiency is also improved!

The "Long Type" relay bag is a transport container that allows for the packaging and transportation of asbestos molded boards (slate boards, calcium silicate boards, siding) without crushing them, all in a consistent operation. The bag body is equipped with 12 belts attached to four sides, securely holding the contents. During lifting, it enables easier and faster rigging operations without requiring skilled techniques for load balance adjustment. Additionally, this belt structure supports both two-point and four-point lifting, making it compatible with various heavy machinery such as cranes and forklifts. The track record for asbestos treatment using the Long Type exceeds a cumulative total of 10 million square meters! 【Features】 ■ Transport without crushing This leads to prevention of scattering and reduces labor, achieving two benefits in one. ■ Stable structure The unique belt structure holds from four sides, allowing for speedy rigging operations. It is also compatible with various heavy machinery for two-point and four-point lifting [patent obtained]. For more details, please contact us or download the catalog.

• Other environmental equipment
• container
• Packaging materials

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.