About the portable automatic water sampling device.

Real-time VFA monitoring device to maximize the efficiency of methane fermentation in anaerobic digestion.

The online VFA meter EZ7200 series is a high-performance online titration device designed for monitoring wet anaerobic digestion tanks. It proposes a new management method for medium to large-scale anaerobic digestion processes. In biomass power generation, industrial wastewater, and sewage treatment, the anaerobic treatment of wastewater and sludge in fermentation tanks involves the breakdown of very complex organic carbon compounds, which presents challenges. Real-time measurement of VFA (volatile fatty acids) is effective for stabilizing the methane fermentation tank in anaerobic treatment. Relying solely on pH measurement and sampling can make it difficult to monitor the conditions inside the fermentation tank, depending on the timing. The ideal pH value inside the fermentation tank is said to be between 6.5 and 7.5, but measuring pH alone is not sufficient; adequate buffering capacity [total alkalinity TAC (also referred to simply as alkalinity)] is necessary to compensate for changes in acid concentration. By continuously monitoring VFA, which are intermediate substances during methane fermentation, it contributes to maintaining a more stable fermentation tank and maximizing gas production. By conducting online measurements at 10-15 minute intervals, it becomes possible to anticipate various events within the digestion tank in advance.

• Water quality testing

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Equipped with Jetson AGX Orin 32GB/64GB ● Gigabit LAN ×1, 10Gigabit LAN ×1 ● USB 3.2 Gen 2 (Type-A) ×4 ● DB-9 connector ×1 (for DIO 8 channels) ● DB-9 connector ×2 (supports RS-232/422/485: Rx/Tx/RTS/CTS) ● Jetpack 6.0.0 pre-installed

Features: ● Equipped with Intel Atom x7835RE/x7433RE ● LPDDR5x 8GB/16GB onboard ● eMMC 32GB/64GB onboard ● LVDS x 1, DDI x 1 ● USB 2.0 x 8, USB 3.2 Gen 2 x 2 ● PCIe x1 x 4 ● COMe Type 10 standard, 84mm x 55mm size ● Operating temperature -40 to 85℃ ● Optional items ECB-920A-0001: Development carrier board NANOCOM-ADN-FAN01: CPU fan NANOCOM-ADN-HSP01: Heat spreader (※ Heat dissipation is required in the enclosure)