The product page for 【Suntool】 has been newly added with the 【Collaboration Proposal】 featuring a PUR adhesive that combines flexibility and heat resistance!

Introducing Toyo Chem Co., Ltd.'s new product! PUR adhesive!

While being PUR, it has adhesive properties, demonstrates adhesion under various environmental conditions, and allows for coating with various application patterns. - "PUR adhesive sheet" that has adhesive properties while being PUR - "Heat-resistant PUR-HM adhesive" with high heat and cold resistance - "Functional optical PUR adhesive" usable in various temperature ranges 【Features】 ■ Has flexibility and durability ■ Low melt viscosity ■ Can be applied at low temperatures ■ Reduces damage to materials *For more details, please refer to the related links or feel free to contact us.

• glue

It enables uniform application without seams or unevenness on wide materials that are difficult to spray coat using conventional methods, and it also allows for thin coatings!

The "Curtain Spray Coating System" is a product that can uniformly apply hot melt in a fibrous form without contact. It enables seamless and even application on wide materials, which is difficult with conventional spray coating, and allows for thin application as well. It minimizes the consumption of hot melt adhesives and is adopted in a wide range of industries, including the filter and building materials sectors. *Uniform micro-particle coating is also possible with liquids other than hot melt (such as chemicals, fragrances, oils, etc.). 【Features】 ■ Allows for uniform application of small amounts of hot melt ■ Capable of applying a soft texture ■ Sharp edges at both ends of the application width ■ Minimal scattering due to application ■ Hot melt can be applied in a fibrous form *For more details, please refer to the PDF document or feel free to contact us. 【Adoption Results】 ■ Numerous major manufacturers ■ Building materials and spray laminate industries ■ Filter industry ■ Sites where the cost of hot melt is high

• Other mounting machines
• Painting Machine
• spray

Utilizing the adhesive force (viscosity) of hot melt to extrude fine fibers and uniformly apply them in a non-woven fabric form! It is also possible to spray apply it as a single unit over a wide area!

The "Curtain Spray" is a device that utilizes the cohesion and viscosity of hot melt adhesive to extrude fine fibers and uniformly apply a thin film in a non-woven fabric manner. It can spray coat in a single unit even for wide widths. Additionally, in the case of liquids (chemicals, fragrances, oils), it can atomize them into fine particles. 【Features】 ■ Soft finish with breathability, uniform coating weight, and beautifully even coating ■ Reduction in the amount of hot melt adhesive used, resulting in cost benefits ■ Compatible with adhesives ranging from high viscosity to low viscosity ■ Environmentally friendly / recycling measures * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Building materials, seals ■ Films, spray lamination ■ Non-woven fabrics, filters

• Other mounting machines

There are methods for applying with tension between rolls and on-roll application, allowing for continuous/intermittent (partial application) depending on the purpose!

This is a method for applying hot melt adhesive in a uniform width, over a surface, or in stripes. There are methods for applying it under tension between rolls and on-roll application, which can be continuous or intermittent (partial application) depending on the purpose. 【Features】 ■ Coater head for contact-type application ■ The application pattern can be arbitrarily set according to the shim pattern. ■ High-speed intermittent adhesion is possible, accommodating adhesives from high viscosity to low viscosity. ■ Beautiful coating with thin film adhesion. ■ There are measures to prevent winding during application and to address clumping of hot melt adhesives (using hot air). * For more details, please download the PDF or feel free to contact us.

• Painting Machine
• spray
• Other painting machines

The foam applicator contributes to new productivity! The newly designed circulation system stabilizes the foam expansion ratio! New adhesive (coating agent).

【Features】 ■ Nitrogen gas is mixed with hot melt adhesive, transforming it into a foam! ■ The bubbles are independent cells, resulting in low water absorption and improved impact resistance. ■ By inputting the desired foaming ratio, anyone can create foam (no complicated operations required). ■ Unique design by Suntool allows switching between foamed and non-foamed states. ■ Newly designed circulation system stabilizes the foaming ratio. ■ In addition to beads, surface coating is also possible, diversifying applications. ■ Foaming the hot melt allows for application with less hot melt. ■ Reduces the cost of the hot melt adhesive used. ■ Compatible with adhesives ranging from high viscosity to low viscosity. *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 ■ Building materials ■ Filling for home appliances ■ Seals ■ Filters ■ Container gaskets

• Other assembly machines

Achieve stable precision coating! Line drawing and dot placement pattern formation nozzle.

The "bead nozzle" is a small nozzle suitable for applying thin lines (beads) and dot applications. It is manufactured with high precision, allowing for extremely low variation between nozzles even in multi-line applications, enabling stable coating, which is why it is used in many industrial machines. By bringing the nozzle closer to the substrate, high-cut multi-line intermittent application is also possible. 【Features】 - Ideal for line (bead) and dot patterns, capable of multi-line intermittent application - Achieves stable coating, providing a uniform and beautiful finish - Reduces product waste, improves productivity, and offers cost benefits *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 - Filling - Molding - Filters - Automotive parts - Refrigerators - Building materials - Packaging - Bookbinding

• Other mounting machines
• Painting Machine
• Other painting machines

The foam applicator contributes to new productivity! The newly designed circulation system stabilizes the foam expansion ratio!

【Features】 ■ Nitrogen gas is mixed with hot melt adhesive, transforming it into a foam! ■ The bubbles are independent cells, resulting in low water absorption and improved impact resistance. ■ Easy adjustment of foaming ratio. ■ Unique design by Santool allows switching between foamed and non-foamed states. ■ Newly designed circulation system stabilizes the foaming ratio. ■ Enables surface coating in addition to bead application, diversifying applications. ■ Foaming the hot melt allows for application with less hot melt. ■ Reduces the cost of the hot melt adhesive used. ■ Compatible with adhesives ranging from high viscosity to low viscosity. ■ By inputting the desired foaming ratio, anyone can create foam (no complicated operations required). * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Achievements】 ■ Building materials ■ Filling for home appliances ■ Seals ■ Filters ■ Container gaskets

• Other assembly machines

A touch panel type that allows control of the foaming ratio! Discharge in solid state is also possible.

【Sample Distribution】We are currently distributing application samples. Please check the end of the article for details. The 'CF Series (Foam-Compatible Type)' is a touch panel type melter (applicator). Foam expansion ratios can be easily controlled from the touch panel. It is also possible to discharge hot melt (adhesive) in a solid (non-foaming) state. The power capacity varies depending on the specifications. 【Features】 ■ Touch panel type ■ Easy control of foam expansion ratios from the touch panel ■ Discharge in solid (non-foaming) state is also possible ■ Available in 8L, 30L, 60L, and 120L types 【Lineup】 ■ CF08 ■ CF30 ■ CF60 ■ CF120 【Applications/Examples of Achievements】 *For more details, please refer to the PDF materials or feel free to contact us. For a limited time, we will send application samples only to companies that inquire! Please feel free to contact us!

• Painting Machine

Touch panel type that allows control of foaming ratio! Discharge in solid state is also possible.

The "CF Series (Foaming Compatible Type)" is a touch panel type melter (applicator). The foaming ratio can be easily controlled from the touch panel. It is also possible to discharge hot melt (adhesive) in a solid (non-foaming) state. The power capacity varies depending on the specifications. 【Features】 ■ Touch panel type ■ Easy control of foaming ratio from the touch panel ■ Discharge in solid (non-foaming) state is also possible ■ Available in 8L, 30L, 60L, and 120L types * For more details, please refer to the PDF materials or feel free to contact us. 【Lineup】 ■ CF08, CF30, CF60, CF120

• Painting Machine

A stable coating method that can be applied non-contact when you want to apply a thin and wide layer for product bonding! Regardless of low or high speed, it achieves minimal splatter and beautiful uniform coating!

The "Spiral Spray" is a method of applying hot melt in a spiral fiberized form onto the substrate. It achieves beautiful spiral application with minimal scattering, regardless of low or high speeds. It is also possible to apply using a foaming machine for foamed spirals. 【Features】 ■ Soft finish with a pleasant texture and breathability ■ Reduces waste/loss of hot melt adhesives ■ Solvent-free/low-solvent for environmental/recycling measures ■ High-speed intermittent adhesion is possible. The spiral can accommodate up to 72,000 rotations per minute, with a width of approximately φ15–20mm. 【Features of the nozzle with secondary air】 ■ The guide air stabilizes the pattern, and the clean air protects the nozzle, significantly reducing maintenance without foreign matter adhesion. ■ Spiral application of high-viscosity hot melts, which was difficult with conventional methods, is now possible. * For more details, please refer to the PDF document or feel free to contact us. 【Applications/Examples of Achievements】 ■ Non-woven fabrics ■ Films ■ Filters

• Painting Machine
• spray
• Other painting machines

This document introduces case studies of problem-solving related to the "dispenser coating equipment" that we handle.

A simple and multifunctional small dispenser allows for the replacement of the head to change various application patterns. 【Features】 ■ Various applications possible with head replacement ■ Simple mechanism and maintenance-free ■ Enhanced convenience with a wide range of options ■ Also available for reactive hot melt (DP300P) ■ Compatible with adhesives from high viscosity to low viscosity ■ Widely used for bonding and filling small boxes ■ Systems that can be mounted on robots are also available *For more details, please download the PDF or feel free to contact us. We would like to introduce an example of how various companies have adopted these features.

• Painting Machine
• Other painting machines

Simple and multifunctional, the small dispenser allows for the replacement of the head to change various application patterns.

【Features】 - Various coatings are possible with head replacement - Simple mechanism for easy maintenance - Enhanced convenience with a wide range of options - Available for reactive hot melt (DP300P) - Compatible with adhesives from high viscosity to low viscosity - Commonly used for bonding and filling small boxes - Systems can also be manufactured for integration with robots - Weight: 3KG (DP300) *Options - Aluminum can preheater *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 ■ Packaging of small boxes ■ Coating on circuit boards ■ Electronic components

• Other processing machines

We are pleased to announce that Tokyo Machine Works Co., Ltd. will be exhibiting at the "INNOVATION EXPO 2025" to be held at Tokyo Big Sight from September 10 (Wednesday) to September 12 (Friday), 2025. 【Exhibited Equipment】 - 1-ton portable autonomous mobile robot (AMR) - 2-ton portable unmanned transport vehicle (AGV) - Shutter-equipped unmanned transport vehicle - Autonomous cleaning robot, etc. 【Booth Number】 - 6-405 You will have the opportunity to see each machine up close, including demonstrations that link the equipment together. We sincerely look forward to your visit during this event. Please note that pre-registration (free of charge) is required to attend the exhibition, so we kindly ask you to register using the link below. https://www.logistech-online.com/jp/registration.php?exhibitor=EX000072 If you would like an invitation, please request it through our contact form.

Contec has added a BTO menu for the Windows 11-based embedded OS - Windows 11 IoT Enterprise LTSC 2024 to its industrial computer "MR4310 series" and has started accepting orders.

Contec has developed the Ethernet wireless converters "RP-WAH-SR12" and "RP-WAH-SR22," which utilize 920MHz sub-gigahertz wireless (IEEE 802.11ah) to enable Ethernet communication wirelessly even at distances of up to 1 km. Sales began on August 21, 2025. The new products are compact IEEE 802.11ah compliant wireless LAN converters that can be installed in various locations. The new Wi-Fi standard "IEEE 802.11ah," which utilizes sub-gigahertz wireless communication, became available in Japan in September 2022. It operates in the 920MHz band without the need for a license and can be used outdoors. Compared to conventional 920MHz wireless communication, it enables high-speed communication and the establishment of long-distance networks, making it expected to be utilized in large factories, plants, and farms. The new Ethernet wireless converters are designed to be lightweight and compact, allowing for installation in various locations such as walls and DIN rails with the included mounting brackets. Additionally, they support external antennas, enabling the construction of flexible wireless LAN systems.

Contec has developed a super compact business computer equipped with the Intel(R) Core(TM) Ultra processor (Series 1), and has started accepting orders for the business computer "LPC-500 Series" (hereinafter referred to as the new product) from August 28, 2025. The new product is a super compact business computer featuring the Intel(R) Core(TM) Ultra 5 processor 125U (Series 1, Meteor Lake-U). It is equipped with "Intel(R) AI Boost," which integrates an NPU into the CPU, allowing for the execution of AI functions such as image recognition and voice processing at high speed and low power consumption while reducing the load on the CPU and GPU. With ultra-compact dimensions of 150(W) × 150(D) × 33(H) mm, it comes with a vertical stand and VESA mounting brackets, enabling installation in tight spaces on desks, behind displays, or inside equipment without restriction. It adopts a BTO (Build to Order) method that allows customers to freely choose memory capacity, storage, OS, and more, enabling the order of a PC with specifications optimal for their needs and budget starting from just one unit.

Thank you very much for your continued support. We would like to inform you that our company will suspend product shipping operations for inventory purposes due to the interim financial closing on the following dates. We apologize for any inconvenience this may cause and appreciate your understanding. Shipping suspension period: Tuesday, September 30, 2025.