New Catalog [Manga] Summer Mold Measures Solved by "Pipe Cleaning"! Released.

Cleaning of die-cast molds and large mold temperature control and cooling pipes is now possible with SkatS!

The mold temperature control piping cleaning machine "Scattos" has significantly increased the cleaning liquid capacity to 60L, in addition to the functions of the conventional "Water Reamer." It is now capable of cleaning the temperature control piping of die-cast molds and large molds, as well as accommodating manifolds and below hoppers. Furthermore, the synergistic effect with the specially formulated cleaning liquid (Scattos WR-1), which has enhanced penetration power, maximizes cleaning effectiveness. Please utilize it to help alleviate labor shortages. 【Features】 - Compatible with large molds, die-cast molds, manifolds, and below hoppers - Built-in flow meter to quantify cleaning effectiveness - Pump power increased threefold (compared to WR-11-ADIII) - Automatic control of pump power output according to piping diameter - Simultaneously removes rust and automatically forms a rust prevention coating - Enhanced cleaning power through hybrid cleaning

• Other physicochemical equipment
• Other cleaning machines
• Other surface treatment equipment

Remove and prevent rust accumulated in the mold temperature control piping and cooling pipes to improve cooling efficiency!

The "Water Remover" is a rust removal machine that automatically handles everything from cleaning mold temperature control piping to rust prevention. It removes layers of rust and impurities that have accumulated in the mold temperature control piping, improving cooling efficiency. 【Features】 - No need to disassemble the mold; simply connect the mold and this product with a hose for easy operation. - Forms a rust prevention coating simultaneously with rust removal. - Adopts an air blow drying system, eliminating the need for rinsing or neutralization after rust removal. - Does not discharge rust removal liquid due to a completely closed system.

• Other cleaning machines
• Other surface treatment equipment
• Other cleaning equipment

Numerous cases are presented where the flow rate of mold cooling water increased fourfold and the surface temperature was restored to -11°C, dramatically improving the cleaning process!

The "Water Reamer" is a pipe cleaning machine that removes layers of rust and impurities deposited in the mold temperature control piping, improving cooling efficiency. No rinsing or neutralization treatment is required after cleaning, and it employs a revolutionary cleaning method that forms a primary anti-rust coating through an air blow drying system.

• Plastic Mould
• Other cleaning machines
• Other surface treatment equipment

A new habit before storing molds!

Preventing corrosion of molds during storage and preventing mold-related issues. This is what I consider to be mold preventive maintenance! The mold temperature control piping cleaning machine "Water Reamer" is a rust removal cleaning machine that removes layers of rust and accumulated impurities from the water contained in the temperature control piping, restoring cooling efficiency.

• Other cleaning machines
• Ultrasonic Cleaner

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing solely on the CPU. It ensures stable authentication without delays even during peak times such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000, it can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!