▼▲▼▲▼▼▲▼▲▼★Mica News★Excellent Insulating Filler (Mica) Muscovite & Biotite★Repco News★▼▲▼▲▼▼▲▼▲▼

One of the characteristics of mica is its insulating properties! It is also resistant to heat and difficult to conduct electricity! It is used in various places, mainly in electronic devices and home appliances, as an insulating material!

Electrical Insulation Due to its high electrical insulation properties, it is used in electrical components and home appliances. Mainly, it is used in home appliances, electronic device components, specialty paper, coatings, semiconductor-related products, etc. Because it is easy to process, it is found in various places, from familiar everyday items to niche applications. *We handle a variety of mica products in different sizes and grades, primarily focusing on Muscovite (S grade) and Phlogopite (M grade). Mica has good compatibility with various materials such as plastic resins, paints, rubber, films, sealing materials, and adhesives. Please feel free to download for more detailed information. ↓↓↓↓↓↓↓↓

• plastic
• Engineering Plastics
• Organic Natural Materials

General grade with high purity and high aspect ratio. Phlogopite, derived from the Greek word phlogopos meaning "like flame."

The "Repkomica S Series" is a product made from natural mica that has been refined and crushed at a domestic factory. It maximizes the high elasticity inherent in natural mica through manufacturing techniques developed over many years, resulting in a high aspect ratio (average particle size/thickness), which is a key feature of flake fillers. By being incorporated into industrial materials such as plastics, paints, and rubber, it is expected to provide various functionalities centered around rigidity, dimensional stability, and heat resistance. 【Features】 ■ Long-term supply stability due to abundant reserves ■ Quality stability through domestic production system ■ No crystalline silica detected (detection level: below quantification limit) ■ Various grades available based on average particle size ■ Flexible response to custom grade orders and surface treatments ■ Short delivery times supported by domestic bases Please feel free to download for more detailed information. 　　　　　　　　　↓↓↓↓↓↓↓

• Other metal materials
• Engineering Plastics
• Organic Natural Materials

Demonstrates high cost performance! Easily applicable to products that require high whiteness and colorability.

The "Repkomica M Series" is a product made from naturally occurring muscovite that has been refined and crushed at a domestic factory. It has a high whiteness and can be easily incorporated into products that require coloring. Additionally, it excels in insulation resistance, making it particularly effective for applications such as electronic components. When filled into industrial materials like plastics, paints, and rubber, it is expected to enhance and impart properties such as rigidity, dimensional stability, and heat resistance. 【Features】 ■ High whiteness allows for easy incorporation into products that require coloring ■ Excellent insulation resistance ■ Particularly high performance in applications such as electronic components ■ Expected to enhance and impart properties like rigidity, dimensional stability, and heat resistance ■ Flexible response to surface treatment and custom grade production ■ Short delivery times supported by domestic facilities

• plastic
• Engineering Plastics
• Organic Natural Materials

◆Developing a stable supply system centered around our domestic factories ◆High cost-performance due to processing raw materials with dry grinding! ◆Custom-made products are also available

"Mica" is a mineral classified as a silicate aluminum compound. The mica products we handle are high-purity, high-quality, and high-aspect-ratio flake powders, and we have established a stable supply system centered around our domestic factory. We offer a wide range of grades with average particle sizes from several micrometers to several hundred micrometers, allowing for flexible responses tailored to our customers' applications and requests. Additionally, since we mainly process raw materials for dry grinding, we achieve high cost performance. 【Features】 ■ A mineral classified as a silicate aluminum compound ■ Non-toxic to humans and eco-friendly ■ High-purity, high-quality, high-aspect-ratio flake powders ■ A stable supply system centered around our domestic factory ■ Flexible responses tailored to customers' applications and requests Please feel free to download detailed information. 　　　　　　　　　↓↓↓↓↓↓↓

• plastic
• Engineering Plastics
• Organic Natural Materials

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.