■■ Update ■■■ Updated the mixed fiber spray reinforcement materials, leaflets, and comparison documents. ■■■

By mixing Balchip MK and Toughlight RG for mortar spraying, the crack occurrence rate in mortar structures is further reduced!

The mortar reinforcement fiber mixed spraying proposed by K.F. involves mixing polypropylene fibers for mortar reinforcement, "Varchip MK," with crack suppression polypropylene short fibers, Toughlight RG, and spraying them. This method reduces the crack occurrence rate in mortar structures, thereby enhancing durability and lowering lifecycle costs. By performing mixed spraying of reinforcement fibers on slopes and other areas, a more lasting weed suppression effect can be expected. 【Why is the crack occurrence rate reduced?】 Reinforcement fibers have various characteristics depending on their type, each with its own advantages and disadvantages. "Varchip MK" has a longer fiber length and a rough surface, allowing the mortar to cling to each fiber, making it difficult to pull out and providing crack prevention effects (cross-linking effect). Additionally, as the bending toughness increases, it is possible to omit the wire mesh and reduce the spraying thickness. However, since each fiber is long and thick, the adhesion area within the mortar decreases.

• Other consumables
• others

It is a polypropylene fiber for mortar reinforcement that excels in workability and chemical resistance.

For crack suppression in slope construction! NETIS registration number: KT-100021-VE. ■ Lightweight and excellent workability. With a density of 0.91g/cm3, it is light and easy to transport and mix. ■ Excellent chemical resistance and rust-free. It has superior alkali resistance and durability. ■ Adhesion to concrete. Embossed processing and hydrophilic treatment improve adhesion and enhance bending toughness. ■ Environmentally friendly. It does not produce dioxins (chlorine gas) when burned. 【Proposal: Weed prevention using reinforced fiber mixed spraying】 At K-F, we propose "weed prevention work using mortar reinforced fiber mixed spraying." Mortar reinforced fiber mixed spraying involves mixing polypropylene fibers for mortar reinforcement, "Balchip MK," with crack suppression polypropylene short fibers, Toughlight RG, and spraying them to further reduce the crack occurrence rate in mortar structures, thereby enhancing durability and reducing lifecycle costs. By performing reinforced fiber mixed spraying on slopes, such as at the base of the slope, more lasting weed prevention effects can be expected.

• others

For suppressing shrinkage cracks in sprayed mortar! Safe material made of polypropylene! Crack-suppressing short fibers that can be mixed with a mixer.

Crack-inhibiting polypropylene short fibers, Toughlight, are processed into bundles, making them less likely to scatter and less likely to pierce the skin. Furthermore, since polypropylene is the material used, no toxic gases are generated during combustion, making it a highly safe crack-inhibiting short fiber. 【Incorporation Effects】 ● Reduces scattering and collapse during spraying ● Reduces shrinkage cracks caused by temperature changes and drying during the curing period 【Excellent Workability】 ● Easily mixed with a conventional mixer ● Generates few fiber balls and has high degradability ● The flow value remains unchanged with the incorporation of Toughlight, maintaining fluidity ● During spraying operations, fibers do not pierce like needles due to rebound There are many other features as well! For more details, please contact us or download the catalog to view. 【Proposal: Weed Control through Reinforced Fiber Mixed Spraying】 At K.F., we propose "Weed Control Work through Mortar Reinforced Fiber Mixed Spraying." Please check the basic information section below for details.

• Other polymer materials
• others

Prevent cracks in slope construction! Safe! Easy! Shortened construction period!

NETIS Registration Number: CG-070010-A "Kuratec" is a vinyl fiber for reinforcing mortar on slopes. By adding "Kuratec," it is possible to shorten the construction period by cutting out the lathing process depending on the site conditions, which in turn achieves cost reduction. Additionally, it has good adhesion to cement, making it less prone to cracking, and if cracks do occur, it suppresses their growth. Furthermore, since the quality of the mortar improves, it is also possible to reduce the thickness of the spray application. For more details, please contact us or download the catalog to view.

• fiber
• Other polymer materials
• others

We would like to introduce "Chibi 0.3" handled by FCR and Bio Co., Ltd. This product is a jacket tube with a rack lid lock and anti-rotation function (compatible capacity 0.3ml). It is autoclavable and suitable for DMSO and liquid nitrogen vapor. We also offer screw caps for 96-well plates. 【Features】 ■ Polypropylene ■ Autoclavable ■ Compatible with DMSO ■ Suitable for liquid nitrogen vapor *For more details, please download the PDF or feel free to contact us.

The low-voltage fuse "SBFW-L M6" is a slow blow fuse that can withstand temporary overcurrents and only blows under continuous overcurrents. In automobiles, it is particularly effective for devices where the current momentarily increases significantly. It is recommended for those facing challenges related to circuit protection with low-voltage fuses (below DC70V) in the automotive and construction machinery industries. It plays a role in protecting the entire vehicle during abnormal conditions in circuits that supply power from the battery to the entire vehicle and in the power supply system.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Introducing a "non-destructive testing device as an alternative to the submerged test" for pharmaceutical packaging products. "Complete vial leak testing device | MSQ-2002 series" Fully automating leak tests for various vials, bottles, eye drops, and cylindrical containers. Please check the link below for videos and catalogs.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.