Maximize the performance and lifespan of your chuck! Chuck Grease CK No.3

Prevent chatter during lathe machining!! Excellent adhesion, water resistance, and lubrication reduce total costs! Special grease for lathe chuck extends chuck lifespan!

Are you replenishing? The lifespan of the chuck changes with chuck grease. Are you choosing? Processing accuracy also changes with chuck grease. When the grease runs out, the base and the jaws slide directly against each other, leading to seizing and wear due to the pressure during gripping, which significantly shortens their lifespan. Additionally, since the chuck rotates at high speeds, centrifugal force causes the grease to scatter, and coolant washes it away, causing the grease to deplete throughout the day. However, daily replenishment can be cumbersome and is often forgotten. Therefore, we have developed a product that is resistant to scattering and strong against being washed away by coolant. Furthermore, it has excellent lubricating properties and can grip at low setting pressures. Extend the lifespan of your chuck while reducing the amount of grease used. Please give it a try for total cost reduction. Customers in the Kanto area can also have grip strength measurement tests conducted. Feel free to reach out to us. ◆ If you would like a sample, please contact us using the form below and specify your "intended use." ◆

• Lubricants

A clear explanation of the features and uses of chuck-specific grease. We will also introduce common concerns related to chucks and their solutions.

This document provides a clear explanation of the uses and important roles of chuck-specific grease, accompanied by illustrations. Additionally, the "Frequently Asked Questions" section includes common issues that arise when using chucks and how to resolve them. 【Table of Contents】 1. Why is grease necessary for chucks? 2. Structure of a chuck 3. Chuck-specific grease 4. What happens if grease is not used on a chuck... 5. Reasons to choose chuck-specific grease 6. Frequently Asked Questions *For more details, please refer to the document available for download as a PDF.

• Lubricants

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

This handy book clearly illustrates the variety of Parker cartridge valves, which come in a rich selection of models. The contents include a handbook featuring "check valves," "shuttle valves," "pressure control valves," "logic valves," "flow control valves," "pressure relief valves," "solenoid valves," "directional control valves," and "proportional valves," among others.

We are conducting a productivity improvement special campaign until the end of March 2025. Customers considering upgrading or adding rotary evaporators are encouraged to take advantage of this opportunity. The "Rotary Evaporator R-300," equipped with high-performance control and an electric lift, is available at a campaign price, including accessories such as a foam sensor that enables bumping prevention. Please check the flyer for more details. 【Target Products (Excerpt)】 ■ Rotary Evaporator R-100 ■ Rotary Evaporator R-300 (High-performance control type) ■ PTFE Diaphragm Vacuum Pump V-300 ■ PTFE Diaphragm Vacuum Pump V-600 (High vacuum type)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.