Water-based inorganic heat-resistant paint Thermis
Water-based inorganic heat-resistant paint Thermis
It is possible to create thermal insulation paint that can withstand high temperatures up to 1000°C by mixing heat-cutting powder with thermal insulation granules at a high density.
Since it is a water-based inorganic heat-resistant paint that does not use organic solvents, pollution-free painting is possible even within facilities. Features of Thermis: 1. High heat resistance and water resistance. 2. The dried film poses no risk of ignition or flammability, and does not generate harmful smoke. 3. Being completely inorganic, it has good moisture permeability and high condensation prevention effects. 4. It does not generate static electricity, preventing dirt from adhering due to static. 5. Because it contains no organic materials, it has less pollution from air contaminants and exhaust gases, and is inactive against enzymes such as mold, resulting in high antibacterial effectiveness. Product Overview: ■ Type: Inorganic silicate fiber-based water binder ■ Applications: Turbines, exhaust manifolds, heat shield plates, exhaust/steam piping, industrial furnaces, reaction kilns, and other high-temperature plants ■ Applicable substrates: Steel and ceramic materials ■ Features: Solvent-free, non-combustible, heat-resistant, ultra-durable, and suitable for re-coating.
Inquire About This Product
basic information
How to Use Thermis 1. Ensure the substrate is thoroughly dried, and if the substrate is deteriorated, perform a degreasing treatment with IPA, alcohol, etc. *If the substrate has a glossy surface, a pre-treatment with a sandblaster or sandpaper is necessary. 2. Carefully mix the settled filler. *Before mixing, please prepare a container with at least double the volume. *The mixing ratio of heat cut powder to Thermis is a maximum of volume 1:1. For vertical surfaces or pipes, mixing at a dilution of about 1:2 makes it easier to apply. *First, transfer the Thermis and thoroughly dissolve the settled fibrous material before adding the heat cut powder and stirring. *Thermis contains just under 1% thickening agent, but adding a small amount can increase the mixing amount of heat cut powder. 3. Apply using a brush, roller, or airless gun. Use a tip size of 2.5 to 3.0 mm for the airless gun. 4. Touch dry at room temperature takes about 30 minutes. Recoating should be done after touch dry. If forced drying is performed, it is preferable to keep it below 100 degrees.
Price information
The price varies depending on the quantity, so please feel free to contact us.
Price range
P2
Delivery Time
P2
※The delivery time may vary depending on the quantity, so please feel free to contact us.
Applications/Examples of results
Caution for Thermis Application ● When applying with a spray gun, please clean the equipment with fresh water after use. ● There is no usable time limit for the paint, but please seal it tightly when not in use. ● Once opened, materials must be sealed tightly and stored away from direct sunlight and rain. Properties of Thermis Appearance: Milky white (contains no pigments) Specific gravity (25°C): 1.60 (JIS K 5407) Viscosity (mPas 25°C): 90 (JIS K 5400) pH value: 8.5 (pH meter) Gloss level: 11 (JIS K 5400) Water resistance: No abnormalities (immersed in clean water at 20°C for 30 days) Alkali resistance: No abnormalities (immersed in lime water at 20°C for 30 days) Solvent resistance: No abnormalities (immersed in toluene at 20°C for 7 days) Weather resistance: No abnormalities (JIS K 5407, 1,000 hours) Fire test: Non-combustible (Japan Building Disaster Prevention Association) Components of Thermis Component name: Mixing ratio % (by weight) ■ Inorganic fiber: 18.6 ■ Dispersant: 1.6 ■ Thickener: 1.0 ■ Silica hydrosol: 78.7 ■ Defoamer: 0.1
Line up（4）
| Model number | overview |
|---|---|
| THERMIS 200ml | Contents: 200ml (Weight 250g) Mixed with Heat Cut Powder 300ml (Weight 110g), it becomes a high-temperature insulating paint suitable for an application area of 1 square meter. Suggested retail price: 6,500 yen (excluding tax) |
| THERMIS 800ml | Contents: 800ml (Weight 1Kg) Mixed with Heat Cut Powder 900ml (Weight 330g), it becomes a high-temperature insulating paint suitable for an application area of 4 square meters. Suggested retail price: 18,000 yen (excluding tax) |
| THERMIS 2.4L | Contents: 2.4L (Weight 3Kg) Mixed with Heat Cut Powder 3L (Weight 1.1Kg), it becomes a high-temperature insulating paint suitable for an application area of 12 square meters. Suggested retail price: 45,000 yen (excluding tax) |
| THERMIS 12L | Contents: 12L (Weight 15Kg) |
Company information
Our manufacturing focuses on creating solutions that anyone, regardless of their expertise, can immediately experience the performance effects of through their own sensibilities. All of our product lineup is derived from energy-saving measures in the automotive industry, and the materials designed for vehicles that can withstand harsh natural and road environments are also suitable for buildings and homes, which we introduce as innovative construction materials. While technology development for sustainable clean energy such as solar, wind, geothermal, and wave power is progressing to prevent global warming, we have completed the development of a dynamic flow power chip for air conditioning units that can maintain a comfortable environment for people even while reducing electricity consumption. The dynamic flow, aimed at energy savings, also has the secondary effect of immediate deodorization, allowing for perfect odor removal of musty smells from air conditioners, cigarette odors from filters, and the smells of human and pet waste without maintenance. It is particularly recommended for medical and caregiving settings.
![[Examples of Powder Coating] Frames and Stands](https://image.mono.ipros.com/public/product/image/5af/2000165472/IPROS6325611834785546171.jpg?w=280&h=280)
