The cooling and heating coating plate for the tabletop coater TC-100S can also be used for biological samples!
The cooling and heating coating plate for tabletop coaters is a product developed for temperature management of slurries and samples. The cooling effect delays the hardening of slurries and is used for temperature management of biological samples. Looking at the image on the left, you can see that the temperature distribution of the coating plate captured by thermography is very good. This has made it easier than ever to manage the coating solution, allowing for coating of slurries and samples that could not be coated before. 【Features】 - Can cool the coating plate. - Can heat the coating plate. - The surface of the coating plate is chrome-plated, making it resistant to scratches. - Can be installed separately after purchasing the tabletop coater TC-100S.
Inquire About This Product
basic information
The cooling coating plate for tabletop coaters was created for temperature management of two-component mixed slurries. The material of the coating plate is aluminum, and the surface is treated with hard chrome plating to prevent scratches. Additionally, by circulating warm water, it is possible to coat while keeping samples warm for applications such as biological systems, making it suitable for use in biological applications as well. * Each requires a cooling water circulation device or a constant temperature water circulation device. * The temperature distribution in thermography varies depending on the usage environment.
Price information
Please contact us separately.
Price range
P3
Delivery Time
Applications/Examples of results
【Applications】 - Temperature management of slurry - Viscosity management of slurry - Temperature management of samples - Drying of slurry 【Achievements】 - Medical device development manufacturer
Detailed information
-
This is a photo of the tabletop coater TC-100S equipped with a cooling coating plate. The setup is completed simply by removing the normally used coating glass and installing the cooling coating plate, making the installation very easy.
-
The cooling water or warm water used for the cooling coating plate of the tabletop coater is supplied through the port on the back of the device to manage the temperature of the coating plate.
-
This is a thermographic image taken while using a cooling coating plate for a tabletop coater, with the cooling water circulation device set to 0 degrees for cooling. Measurements taken at four points around the stage show a temperature distribution of 5.5 to 6.1 degrees, achieving a variation within 1 degree.
-
This is a thermographic image taken while cooling was performed using a cooling coating plate for a tabletop coater, with the cooling water circulation device set to -5 degrees. Measurements taken at four points around the stage achieved a temperature distribution of 2.8 to 4.2 degrees within 1.5 degrees.
-
This is a thermographic image taken while cooling was performed using a cooling coating plate for a tabletop coater, with the cooling water circulation device set to -15 degrees. Measurements were taken at four points around the stage, achieving a temperature distribution between -2.0 degrees and -3.6 degrees, within 1.6 degrees.
Line up（3）
| Model number | overview |
|---|---|
| TC-100S | The Smart tabletop coater has been developed for coating purposes up to 100mm square and is ultra-compact. The new tabletop coater comes standard with a vacuum suction plate, making it compact enough to be installed inside a glove box. The device size is approximately A4, allowing for flexible installation locations, and it weighs less than 10kg, making it easy to move the device. |
| TC-3 type | The tabletop coater TC-3 is a tabletop coater that can coat A4 size. If you are looking for a larger coating size than the tabletop coater TC-100S, please take a look at this one. |
| TC-1 type | The tabletop coater model TC-1 is designed for large-area coating and can accommodate evaluations up to A3 size. Similar to the tabletop coater series, it allows for the installation of coating tools from other manufacturers, ensuring that the coating tools you currently own will not go to waste. |
Company information
Throughout history, the advancement of science and technology sought by humanity knows no bounds. Today's prosperity is an achievement made possible by humans, cultivated through a relentless spirit of challenge and a continuous attitude of creating something new. This has been the theme of our company since its founding as a specialist in the industry. We approach the latest technologies with a pioneering spirit and are committed to developing original products that boast high precision and high reliability. However, no matter how advanced the environment becomes, technology must contribute to humanity, and technology cannot be discussed without humans. We believe that the future shape of technology lies in its closeness and harmony with humanity. In an era rich in hardware, humanity must be prioritized. Mitsui Electric Machinery aims for the "fusion of humanity and technology" and will continue to hold dreams for the coming century.