Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
136～150 item / All 232 items
A practical machine that thoroughly pursues the accuracy and operability of on-site calibration.
An important condition for the calibration device is that it must have better mechanical accuracy than the actual printing device. This device far exceeds the printing accuracy of various companies.
Is the temperature of the PCR and real-time PCR devices accurately controlled? We offer low-cost PCR temperature calibration that complies with application and audit standards.
DriftconSystem calibrates the temperature on the block of your PCR using ISO-approved probes (corresponding to each function). Currently, over 100,000 calibrations are conducted annually in various countries, including Europe, the United States, and China. Based on this track record, it is also possible to determine pass/fail criteria for each model by comparing the calibration results of similar devices. Measurements can be conducted by the customer (the equipment is available for rent), allowing us to offer this service at a low cost. 【Features】 ■ Over 100,000 calibrations conducted annually in various countries, including Europe, the United States, and China ■ 1,025 types of devices compatible with PCR and real-time PCR ■ On-site calibration services available from our company ■ Compliance with ISO 17025, ISO 15189, and ISO 20836 for applications and audits ■ Issuance of calibration certificates for ISO 15189 traceability probability evidence *For more details, please refer to the PDF document or feel free to contact us.
This is a simple type of temperature calibrator specifically for infrared radiation thermometers.
You can easily check the accuracy of your infrared radiation thermometer. The temperature calibrator for infrared radiation thermometers that measure surface temperature is very expensive and not common, but ACOM has a structure that applies black enamel paint to the base steel material and attaches an aluminum tube on top of it.
It is a compact tabletop model with heating and cooling functions, capable of performing temperature calibration at 0°C using +56°C or ice water, and is a low-cost temperature calibrator.
Regular temperature checks of thermometers are essential for reliable temperature measurement. To perform high-precision temperature calibration with the simple temperature calibrator MINI, it is recommended to use the high-precision standard thermometer RF-100 for regular temperature checks.
This is a temperature calibrator for infrared radiation thermometers designed with a compact and lightweight structure so that calibration can be performed on-site.
The BX-350 can be calibrated between +50°C and +350°C, while the BX-500 can be calibrated between +50°C and +500°C. Connect the BX-350/500 to the power supply, turn the switch on, and set it to the desired calibration temperature. After the temperature stabilizes, set the emissivity of the infrared radiation thermometer to 0.95 and measure the temperature on a large black body target. Then, determine the error between the displayed temperature of the BX-350/500 and the temperature reading of the thermometer. The BX-350/500 is equipped with an RTD (platinum resistance) temperature sensor for temperature control.
The DW-3001 is a temperature calibrator designed with a compact and lightweight structure that allows for calibration of digital thermometers with temperature sensors on-site.
The DW-3001 supports sensor diameters of 3.3, 4, 4.76, and 6.35 mm. After connecting to the power supply and turning the switch on the front panel to "On," the specified temperature will stabilize within ±0.5℃ after about 5 minutes. Then, insert the thermometer's sensor into a hole of the same size as the sensor to determine the error between the displayed temperature of the DW-3001 and the thermometer. The DW-3001 can be calibrated with a resolution of 0.1℃ between +33℃ and +300℃.
The DW-3101 is a compact and lightweight temperature calibrator that also supports calibration at negative temperatures.
Calibration can be performed between -10℃ and +110℃ with a resolution of 0.1℃. Additionally, by replacing the insert, it can accommodate temperature sensors with diameters of 3.3, 4.1, 4.8, 6.4, and 9.6 mm. After connecting to the power supply and turning on the switch on the front panel, the temperature will stabilize at either 0℃ or 100℃ within approximately 10 minutes, with an accuracy of ±0.5℃ from the ambient temperature. Then, insert the thermometer's sensor into the hole of the insert that matches the size of the sensor to determine the error between the displayed temperature of the DW-3101 and the thermometer. The DW-3004 will be delivered with a calibration certificate that includes traceability.
This is a noise calibrator used to check if the sound level meter is functioning properly.
This is a noise calibrator that generates accurate noise signals (94 dB and 114 dB) to verify whether the sound level meter is functioning properly. The usage is very simple: slide the range switch to set the desired noise level (94 dB or 114 dB). The SC-5 will immediately emit a constant noise signal once the switch is turned on. If the display level of the sound level meter is not within the accuracy range of 94 dB or 114 dB, refer to the operating manual of the sound level meter to adjust the displayed value. Selling price/tax included: ¥21,000
This is a noise calibrator used to generate accurate sound for the operation check and calibration of a sound level meter.
CENTER 326 is compliant with international standards ANSI S1.4-1984 and IEC 60942-2003 Class 2, and is compatible with various sound level meters and measuring instruments.
