Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
31～45 item / All 232 items
Standard Calibrator STD5000M
- Calibration of a total of 6 types of functions (DCV/ACV/DCA/ACA/OHM/Hz) is possible. - Equipped with 90 output memory slots, allowing for the storage of arbitrary settings.
It is possible to check the test limits at the workplace! We will introduce the calibrators for "724" and "725".
Our company handles the calibrator '770065' for the workstations '724' and '725'. It is possible to verify the test limits of the workstation monitor '724' and the portable wrist strap monitor '725' in the workplace. The grounding circuit of '725' is checked using a grounding clip connection and a knob switch. Additionally, calibration is performed in accordance with the procedures and standards set by the International Standard Technology Institute. 【Features】 ■ Ability to verify the test limits of '724' and '725' in the workplace ■ Check the grounding circuit of '725' ■ Calibration performed according to the procedures and standards established by the International Standard Technology Institute *For more details, please refer to the related link page or feel free to contact us.
Introducing the calibrator for workstation monitor "770075" with a calibration certificate compliant with NIST!
The "770076" is a calibrator for the workstation monitor "770075." It is possible to calibrate the SCS 770075 WSMONITOR2 Plus while it is installed on-site. It has been calibrated according to procedures and standards approved by NIST. For more details regarding the calibration of SCS products, please contact us. 【Features】 ■ For workstation monitor "770075" ■ Calibration can be performed on-site with the SCS 770075 WSMONITOR2 Plus installed ■ Comes with a calibration certificate compliant with NIST ■ Made in the USA *For more information, please refer to the related links page or feel free to contact us.
Calibrated according to procedures and standards approved by NIST! Protects the tester from electrical interference during use.
Introducing our single-wire continuous monitor calibration device '98221'. You can check the test limits of Desco's continuous monitor (single-wire) at the factory without having to transport the monitor out of the workspace. Calibrated according to NIST-approved procedures and standards. With a new extruded aluminum cover, it protects the tester from electrical interference during use. 【Features】 ■ New extruded aluminum cover ■ Protects the tester from electrical interference during use ■ Comes with NIST calibration certificate ■ Allows you to check the test limits of Desco's continuous monitor (single-wire) at the factory *For more details, please refer to the related link page or feel free to contact us.
This is a device for calibrating vacuum gauges in accordance with JIS Z 8750. A simplified version can also be produced upon request.
This is a device for calibrating vacuum gauges in accordance with JIS Z 8750. It is ideal for calibrating vacuum gauges that measure the medium vacuum range (mainly thermal conductivity vacuum gauges such as Pirani gauges). A simplified version can also be manufactured upon request.
The 1G model offers top-class resolution! It is well-suited for use in factories for semiconductors and pharmaceuticals, as well as in medical devices.
We would like to introduce the pressure calibrators, the external pump "FLUKE 717" and the manual pump integrated "FLUKE 718." The 1G model has top-class resolution, making it suitable for use in factories for semiconductors and pharmaceuticals, as well as in medical devices. Additionally, the high-pressure range models are suitable for the maintenance of hydraulic gauges in machine tools and heavy machinery. 【Features】 ■ Manual pump integrated (718) and external pump (717) ■ Supports pressures up to 34MPa (717) ■ High-resolution models: 717 1G, 718 1G ■ Explosion-proof model: 718Ex (30G, 100G, 300G) compliant with ATEX II G Ex ia IIC T4 ■ Compatible with water pressure and hydraulic pressure (500G to 5000G) *For more details, please refer to the PDF materials or feel free to contact us.
Measure, generate, and simulate 4-20mA signals! Robust portable design with a standard 3-year warranty.
The "FLUKE-729" is an automatic pressure calibrator designed for process technicians. It simplifies the pressure calibration process, allowing for faster and more accurate test results. By simply inputting the target pressure, the calibrator automatically supplies air to reach the target set point, and the pressure stabilizes at the target value through internal fine-tuning control. 【Features】 ■ Automatic pressure generation and adjustment up to 2MPa ■ Easy recording using onboard testing ■ Automatic internal pressure fine-tuning ■ Measurement, generation, and simulation of 4-20mA signals *For more details, please refer to the PDF document or feel free to contact us.
Easily restart the test! A calibrator that remembers the settings from when the power was turned off when the power is turned on.
The "FLUKE-712B-RTD" is a temperature calibrator that can measure and simulate 13 different types of RTDs and resistances. It comes standard with a magnet hanger designed for each device. It measures 4-20mA signals while simultaneously outputting temperature signals. Additionally, it allows for configurable 0% and 100% source settings to quickly check for 25% linearity. 【Features】 ■ Capable of measuring and simulating 13 different types of RTDs and resistances ■ Measures 4-20mA signals while simultaneously outputting temperature signals ■ Standard equipped with a magnet hanger designed for each device ■ Linear ramp based on 0% and 100% settings and 25% step automatic ramp *For more details, please refer to the PDF document or feel free to contact us.
A robust and highly reliable design suitable for outdoor use! A high-performance and user-friendly calibrator.
The FLUKE-724 is a product that can test and calibrate almost any thermometer using measurement and generation functions. With a clear dual display, you can simultaneously check input and output. Its compact and streamlined shape makes it easy to carry. Additionally, you can work in dimly lit areas with the backlight. 【Features】 ■ Clear dual display allows simultaneous checking of input and output ■ Measures RTD, thermocouples, resistance, and voltage for testing sensors and transmitters ■ Simulates or generates thermocouples, RTD, voltage, and resistance for calibrating transmitters *For more details, please refer to the PDF document or feel free to contact us.
Large battery capacity with 4 AA batteries! The easy-to-read measurement/generation screen can display input and output simultaneously.
The FLUKE-725 is a product that can test and calibrate almost all processing parameters using measurement and generation functions. With simple controls, it can be easily operated without a menu, and the memory function allows for quick setup. Additionally, by using an optional pressure module, it can measure and generate current, voltage, temperature (RTD and thermocouple), frequency, resistance, and pressure. 【Features】 ■ Compact and simplified design for easy portability ■ Robust and reliable design suitable for outdoor use ■ Easy-to-read measurement/generation screen that can display input and output simultaneously ■ Operates high-speed pulse-type RTD transmitters and PLCs with a short pulse width of 10ms *For more details, please refer to the PDF document or feel free to contact us.
Multilingual interface! Equipped with a rechargeable lithium-ion battery that allows for 10 hours of continuous use.
The FLUKE-753 is a high-functionality and multifunctional documenting calibrator that allows for the creation of procedures, work lists, downloading of work instructions, as well as uploading data for printing, storage, and analysis. It enables the creation and execution of automatic As Found/As Left procedures, allowing for the recording and documentation of compliance with quality programs and quality regulations. It can store downloaded procedures and calibration results for up to one week. Additionally, it features a bright white dual display that allows simultaneous reading of generation and measurement parameters. 【Features】 ■ Powerful yet easy to use ■ Recording and documentation of results ■ True handheld ■ Robustness and reliability *For more details, please refer to the PDF materials or feel free to contact us.
