Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.
16～30 item / All 82 items
We select the optimal components and build the equipment with high technical skill, allowing us to timely verify the performance and durability of our customers' products.
We will envision the flow of the examination and propose optimal control that is always tailored to the customer.
For managing mold temperature in heat-resistant resin molding! A dedicated oil mold temperature control machine.
The thermal oil circulation device provides a stable flow even through small holes in molds, thanks to a high-discharge pressure pump. With the adoption of mold sensor systems and time-proportional controllers, high-precision temperature management is achievable. Each alarm lamp allows for easy identification of abnormal areas. Thermal oil circulation devices for molds, rolls, jackets, etc. are available in maximum temperature types of 150°C, 200°C, 250°C, and 320°C. 【Features】 ○ Sealed design minimizes oil degradation ○ Small media volume ensures quick temperature response ○ Equipped with various safety devices ★ Custom orders available ★ As a custom example, there are all-stainless steel products. Thermal oil circulation device (all exterior SUS specification) http://stzk.co.jp/publics/index/32/ For more details, please contact us or download the catalog.
![W (Double) Separate Type New Model Constant Temperature Water Circulation Device [Indoor Management]](https://image.mono.ipros.com/public/product/image/63e/2000203694/IPROS6356438967903705372.jpg?w=280&h=280)
A new constant temperature water circulation device with the controller and heat exchange tank separated from the main unit!
The previous constant temperature water circulation devices had the operation and measurement panel located on the outdoor equipment body, making it difficult to notice equipment troubles or water temperature abnormalities. Additionally, it was necessary to go outside to set the operation. Marui's new constant temperature water circulation device is designed to separate the controller from the equipment body, allowing it to be installed indoors. This enables operation management within the testing room and allows for quick detection of any troubles through the equipped alarm buzzer and abnormality lamp. Furthermore, the temperature control and circulation of the conditioning tank are carried out by a "heat exchange tank" that is separated from the equipment body, preventing the clogging of calcium carbonate in the equipment piping as seen in conventional models. Additionally, features have been added to reduce the adhesion of calcium carbonate to the heat exchange coils and circulation pump, thereby minimizing the effort required for coil cleaning and enhancing usability.
Reviving ponds with the blessings of nature! Developed through the self-purification mechanisms taught by nature.
"Calchifan" is a circulation device that induces a flow created by nature. With minimal energy, it collects a large volume of bottom water from a wide area and circulates it vertically. The flow created by the device promotes uniformity in the entire lake's water through vertical flow and a large amount of moving water. In water areas where temperature uniformity is achieved, the risen bottom water spreads widely due to the energy of the blades, allowing the high dissolved oxygen in the surface water to be directed to the lower layers. [Features] - Provides oxygen to the bottom sediment - Produces oxygen through photosynthesis - Induces natural flow - Absorbs oxygen - Releases decomposition gases *For more details, please refer to the PDF document or feel free to contact us.
"Reduce cable burning of the water-cooled torch" with a safe tank capacity of 10L. *Demo units are available for loan (water-cooled torch can also be loaned as a set).
The "Cooling Water Circulation Device" is a product of Yamaki Co., Ltd., which sells tools such as welding torches (TIG torches, die head torches, etc.). With a heat dissipation of 2.5 kW, it provides powerful cooling. The tank capacity is 10L, offering excellent cooling capability, and it can reduce the burning of water-cooled torch cables, thereby decreasing the frequency of replacements. 【Features】 ■ Powerful cooling with a heat dissipation of 2.5 kW ■ Excellent cooling capability with a tank capacity of 10L ■ Reduces burning of water-cooled torch cables ★ Demo units are available for loan! It is also possible to borrow them together with water-cooled torches. If you are interested, please apply through "Contact Us." *For product details, please refer to the catalog available for "PDF Download." Yamaki's welding-related components can also be purchased from the online shop. For more information, please check the URL below.
![[Case Study] Cooling Water Circulation System (Takuma Corporation)](https://image.mono.ipros.com/public/product/image/8ae/2000438897/IPROS3601270583303506929.jpg?w=280&h=280)
While using an extended welding torch, an error occurred due to insufficient water flow! Easily solve the water flow shortage with Yamaki's 10L cooling water circulation device.
We would like to introduce companies that have adopted Yamaki's "Cooling Water Circulation Device." << Case Study Introduction >> Takuma Corporation (Challenges Faced) They were using welding machines, welding torches, and cooling water circulation devices from Company P, but when they extended the welding torch from the usual 8m to 15m, a problem occurred where insufficient water flow caused errors, making it unusable. (Voices of Satisfaction) After testing our cooling water circulation device with a water flow of 10L, they were able to use it without errors, and in addition, the rise in cooling water temperature was suppressed, leading to stabilized welding current, which resulted in their adoption of our device. ★ Demo units are available for loan! It is also possible to loan them along with water-cooled torches. If you are interested, please apply through "Contact Us." * For product details, please view the catalog from "PDF Download." Yamaki's welding-related components can also be purchased from our online shop. For more details, please check the URL below.
Cooling water circulation device suitable for refluxing low boiling point solvents such as dichloromethane and ethers.
The "ACE-200e" is a compact chiller cooling water circulation device that can cool circulating water down to 5°C. Despite its small size, it has a cooling capacity of 180W (at 10°C), a maximum lift of 4m, and a maximum flow rate of 5.5L/min (50Hz), providing sufficient capability. Additionally, its installation area is B5 size (180W × 260D) and a height of 385mm, making it suitable for installation in various locations such as inside a draft chamber or under a laboratory bench. 【Features】 ■ Capable of circulating cold water to a single 300mm Jim Roth for reflux ■ Usable for water-cooled Peltier and column cooling, among other applications *For more details, please download the PDF or feel free to contact us.
Easy operation with a color touch panel! You can easily switch between multiple varnish lines.
The "TRESU XL5i" is a circulation system that supports various special varnishes, including standard water-based/UV clear varnishes and pigmented varnishes. It is a compact model equipped with two speed-controlled hose pumps. It provides accurate and stable varnish supply even for high-viscosity varnishes. Additionally, it has achieved a system that does not produce bubbles in pressure control mode. (A pressure control compatible chamber and recommended anilox are required) 【Features】 ■ Compatible with various special varnishes ■ Easy installation ■ Simple operation via a color touch panel ■ Varnish recovery and cleaning processes are timer-controlled ■ Standard varnishes can also be used in flow mode *For more details, please refer to the PDF materials or feel free to contact us.
Production time can be expanded by up to 30%! This allows for improved production, uniform quality, and reduced resource consumption.
The "TRESU F10 iCon" is an ink circulation system that stabilizes print quality at a high level through automatic management of ink "flow," "pressure," "viscosity," and additionally "temperature and pH control (optional)," thereby reducing paper waste and adjustment time to enhance production efficiency. The fully automatic cleaning function with precise flow control shortens working time and reduces ink loss and waste liquid volume. 【Features】 ■ Fully automatic control with advanced parameter settings ■ Rapid job change with automatic cleaning for all colors ■ Quick ink exchange with a trolley system ■ No need for manual pipe replacement ■ Closed-loop circulation system *For more details, please refer to the PDF document or feel free to contact us.
![ATF Oil Circulation Device [Circulates heated/cooled ATF oil!]](https://image.mono.ipros.com/public/product/image/057/2000489795/IPROS95590623386385710917.png?w=280&h=280)
Circulate heated/cooled ATF oil to the testing device! Equipped with overload detection and interlocks for overheating detection in each heater, ensuring safe use!
We handle the "ATF Oil Circulation Device," which circulates heated/cooled ATF oil to the testing equipment. Each pump and chiller is equipped with overload detection, and each heater has overheat detection interlocks, ensuring safe usage. Additionally, operation is possible via a color touch panel located on the control panel, allowing for temperature monitoring. The piping diagram displayed on the touch panel enables monitoring of the operational status of each pump, chiller, etc., within the device during operation. 【Specifications】 ■External dimensions: W2600 x H2000 x D1500 (mm) ■Test oil: ATF-GIS-G32 ■Operating temperature: -10 to +150℃ using a water-cooled chiller ■Capacity: 40℃ to 150℃ in 120 minutes, 20℃ to -10℃ in 120 minutes ■High-pressure oil pumps for circulation: 3 units *For more details, please download the PDF or feel free to contact us.
Featuring paint circulation pumps, back pressure valves, and paint filters!
This catalog introduces painting-related products handled by Japan PCS Corporation. It includes equipment such as paint circulation systems, air blow devices (compressed air type), and paint regulators. The paint circulation system features both loop dead-end and two-pipe methods, preventing sedimentation and separation of paint by continuously circulating it through the piping, while ensuring a homogeneous state for painting with spray guns and electrostatic painting machines in the paint booth. [Featured Equipment] ■ Paint circulation system ■ Wipe device ■ Air blow device (compressed air type) ■ Paint circulation pump ■ Paint agitator (stirring machine) *For more details, please refer to the PDF document or feel free to contact us.
