We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Coating.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Coating×吉田ＳＫＴ - List of Manufacturers, Suppliers, Companies and Products

Coating Product List

346～360 item / All 364 items

Displayed results
Contract Coating Services

Contract Coating Services

Professional contract coating services! Yoshida SKT helps create new value with coating technology.

Yoshida SKT is a company that has been leading innovations in fluoropolymer processing technology for over half a century. Starting with the licensing agreement with DuPont in the United States in 1968, we have focused on the introduction and development of fluoropolymer coating technologies, including Teflon(TM). Our technological capabilities extend beyond Teflon fluoropolymer coatings and have led to the development of a variety of coating technologies. 【Key Surface Treatment Technologies】 Teflon Fluoropolymer Coating Features non-stick properties, chemical resistance, heat resistance, and cold resistance, making it suitable for a wide range of applications. MY Lining(R) A permeation-resistant PFA lining, ideal for handling chemical substances. SafeLON(R) A fluoropolymer coating with anti-static properties, enhancing safety. Non-Stick Coating Series A series of coatings specifically designed to address adhesive substances. BICOAT(R) An organic-inorganic composite coating system boasting ultra-durability. NanoProcess(R) A precision thin-film coating process that meets cutting-edge technological demands. From extensive material selection to the provision of test pieces, Yoshida SKT offers meticulous support tailored to the specific needs of each customer.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Achieve slip resistance with wear-resistant coating! Coating solution case studies available.

Achieve slip resistance with wear-resistant coating! Coating solution case studies available.

An alternative to fluororesin coatings! A case study of a coating that achieves both wear resistance and slip properties that were previously given up on.

The resin caps immediately after molding are sticky and are coated with fluororesin to provide slip properties. However, fluororesin is prone to wear, and when it wears down, it can lead to foreign matter contamination. The document describes a solution to enhance "slip properties" without wear. For details, we will introduce a case study of mirin caps for a major beverage manufacturer! *For more information, please contact us or refer to the catalog.

  • Other surface treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PFAS regulation compliance fluoropolymer alternative engineering plastic coating

PFAS regulation compliance fluoropolymer alternative engineering plastic coating

Proactive response to environmental regulations! High-performance non-fluorinated coatings as alternatives to fluoropolymer.

Introducing the "Non-Fluorinated Engineering Plastic Coating" provided by Yoshida SKT. In preparation for the recent strengthening of PFAS regulations, we have started new contract processing using engineering plastics (EPL) as an alternative coating technology that does not use fluororesins. We offer five types of engineering plastic materials, including PEEK, PPS, PI, PAI, and PES, and will propose the most suitable coating for your application. 【Features】 ■ Proactive response to PFAS regulations ■ Excellent properties such as high strength, heat resistance, and chemical resistance ■ Five types of engineering plastic materials: PEEK, PPS, PI, PAI, PES ■ A lineup of our uniquely developed PFAS-free coatings (FFLC series, CAS) ■ Free coating technology consultation by technical sales representatives 【Applications】 Surface treatment for manufacturing equipment and parts such as aircraft components, automotive parts, medical devices, semiconductor manufacturing equipment, electronic substrates, and electrical connectors. *We will listen to your challenges and propose the optimal coating. For more details, please download the materials or feel free to contact us.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High durability coating for injection molding molds "BicoatⓇ NYK-01"

High durability coating for injection molding molds "BicoatⓇ NYK-01"

Double the lifespan of surface treatment and significantly reduce mold replacement frequency!

The high durability coating for molds, "BicoatⓇ NYK-01," is a high-performance surface treatment that reduces resin adhesion and wear in injection molding, thereby improving productivity. With a special coating designed for use in high-temperature environments, it achieves approximately twice the lifespan compared to conventional surface treatments. This contributes to reduced replacement frequency and lower running costs. It has a proven track record with automotive motor parts manufacturers and is a trusted coating technology that leads to regular requests. 【Features】 ■ Incredible durability ■ High hardness, resistant to scratches ■ Excellent wear resistance ■ Superior non-stick and release properties ■ Safe for molds requiring micron-level precision It demonstrates wear resistance under high-temperature and high-pressure conditions, preventing adhesion from molten resin. Test results have confirmed approximately twice the lifespan compared to conventional surface treatments. It enables smooth mold release during forming and is ideal for customers aiming to improve productivity. If your company is considering reducing replacement frequency and material costs, please feel free to consult with us. *For more details, please refer to the PDF materials or contact us at your convenience.

  • Other surface treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mold for automotive motor parts - Release and wear-resistant coating 'Bicoat'

Mold for automotive motor parts - Release and wear-resistant coating 'Bicoat'

Durability improved by approximately 2 times! Dramatically enhanced productivity of injection molding molds.

"Bycoat® NYK-01" is a surface treatment technology that significantly improves the durability of molds in the injection molding process. It has particularly strong resistance to the adhesion of molten resin and wear, contributing to increased productivity and cost reduction. 【Features】 - The high-hardness coating, which excels in wear resistance, doubles the durability compared to conventional products. - It has excellent non-stick properties, suppressing the adhesion of molten resin. - It maintains effectiveness even under high temperature and high pressure conditions. 【Applications】 - Injection molding molds for automotive motor parts - Ideal for molds used in high-temperature resin molding 【Track Record】 - Adopted by major automotive parts manufacturers - Regular repeat orders after adoption for new molds 【Features】 - Doubles durability compared to conventional products. - Significantly reduces work loss and mold replacement frequency. - Exhibits excellent performance even under high temperature and high pressure conditions. Recommended for those facing challenges with resin adhesion prevention or wear-resistant coatings. Please feel free to contact us!

  • Other surface treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Guide to PFAS Measures for the Manufacturing Industry! From PFAS-Free Coatings to Solutions.

Guide to PFAS Measures for the Manufacturing Industry! From PFAS-Free Coatings to Solutions.

Understand the latest trends in PFAS and alternative technologies in one book! Free guide on PFAS measures for the manufacturing industry.

"The PFAS Countermeasures Guide for the Manufacturing Industry" is a comprehensive guidebook that consolidates essential information on the latest trends in PFAS and alternative technologies for 2025. It clearly explains the differences between PTFE, PFOS, and PFOA, which are surprisingly not well-known, through comparison tables detailing their structures, properties, and toxicity. Feel free to download it if you are interested. [Contents (excerpt)] ■ What are PFAS? ■ Latest trends in PFAS regulations ■ What should be done? Responding to regulations

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
What are PFAS alternatives? Fluoropolymer (PTFE) alternative coatings.

What are PFAS alternatives? Fluoropolymer (PTFE) alternative coatings.

Fluoropolymer (PTFE) alternative coatings compliant with environmental regulations.

PTFE (polytetrafluoroethylene) is the most widely used fluoropolymer and is also known by the brand name "Teflon." It is a material with properties such as non-stickiness, low friction, chemical resistance, weather resistance, excellent electrical characteristics, and high heat resistance (maximum operating temperature of 260°C). In response to trends in PFAS regulation, we are advancing the development of coatings using alternatives such as silicone and other engineering plastics as substitutes for PTFE (fluoropolymer). By appropriately adopting these alternatives according to their applications, it is expected that desirable functions can be achieved. 【Characteristics】 ■ Alternative technologies utilizing super engineering plastics such as silicone, PEEK, and PI ■ Non-fluorinated coatings optimized for specific applications ■ Functionality tailored to applications, such as release properties, non-stickiness, and chemical resistance 【Non-Fluorinated Coating Product Lineup】 Yoshida SKT continues to develop products in collaboration with customers, offering new non-fluorinated coating products as options to address next-generation challenges. Together with conventional products, we are realizing a diverse lineup of PFAS-free options. For more details, please download the materials or check the related links.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PTFE alternative coatings in response to trends in PFAS regulation.

PTFE alternative coatings in response to trends in PFAS regulation.

Fluoropolymer (PTFE) alternative coatings compliant with environmental regulations.

Among PFAS, PTFE (fluoropolymer) is a substance that has different properties from PFOS, PFOA, and PFHxS, which are regulated under international treaties (the POPs treaty). Unlike these substances, PTFE is considered to have no harmful effects unless used at significantly high temperatures. However, there is currently a proposal being considered within the EU to regulate a comprehensive range of PFAS, including PTFE. If this regulatory proposal is adopted, it could lead to international regulatory trends beyond the EU, so it is necessary to keep an eye on developments. If regulations on fluoropolymers become a reality, the impact on the manufacturing industry could be immense, forcing companies to seek alternatives. Since there is no technology that can completely replace the excellent functions of fluoropolymers, the response will be extremely challenging. Yoshida SKT offers both fluoropolymer coatings (Teflon coatings) and non-fluoropolymer coatings, providing proposals tailored to customer needs. For more details, please check the link.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High hardness and excellent release properties coexist! CAS (Ceramic Alloy System)

High hardness and excellent release properties coexist! CAS (Ceramic Alloy System)

High durability and high release property coating 'CAS (Ceramic Alloy Coating)'

**Features** CAS is a coating technology that achieves both high hardness and excellent release properties. It enables the formation of rounded convex surfaces, which was difficult with conventional coating technologies, thereby improving the release properties of adhesives and resins. Additionally, unlike traditional thermal spraying, it can be reprocessed without damaging the substrate, making it highly maintainable. **Differences Between CAS and Thermal Spraying** ■ Characteristics of Conventional Thermal Spraying Technology - Forms convex surfaces by spraying melted metals or ceramics at high temperatures, resulting in a jagged surface shape. ■ Characteristics of CAS Technology - Capable of forming rounded ceramic convex surfaces. **Five Features of CAS** - Excellent release properties - Wide processability - Selection of convex surfaces tailored to applications - Diverse lineup of release materials - Easy reprocessing This is a groundbreaking coating technology that realizes these features. For more details, please check the related links.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Easy to reprocess and excellent release properties! CAS coating

Easy to reprocess and excellent release properties! CAS coating

A coating that allows for reprocessing without damaging the substrate compared to conventional thermal spraying during the stripping and reprocessing phase.

**Features** CAS is a coating technology that achieves both high hardness and excellent release properties. It realizes the formation of rounded convex surfaces, which was difficult with conventional coating technologies, thereby improving the release properties of adhesives and resins. Additionally, unlike traditional thermal spraying, it allows for reprocessing without damaging the substrate, making it highly maintainable. **Differences Between CAS and Thermal Spraying** ■ Characteristics of Conventional Thermal Spraying Technology - Forms convex surfaces by spraying melted metals or ceramics at high temperatures, resulting in a jagged surface texture. ■ Characteristics of CAS Technology - Capable of forming rounded ceramic convex surfaces. **Five Features of CAS** - Excellent release properties - Wide processability - Selection of convex surfaces tailored to applications - Diverse lineup of release materials - Easy reprocessing This is a groundbreaking coating technology that realizes these features. For more details, please check the related links.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explaining the features, advantages, and disadvantages of ETFE coating.

Explaining the features, advantages, and disadvantages of ETFE coating.

ETFE coating is a coating technology that uses ETFE, a copolymer of tetrafluoroethylene and ethylene.

ETFE coating is a type of fluoropolymer coating that is primarily processed using techniques such as powder coating and rotational molding. ■ What is ETFE Coating? ETFE is a type of fluoropolymer, specifically a copolymer of tetrafluoroethylene and ethylene. It is mainly processed using powder coating technology and is considered a relatively thick coating among fluoropolymer coatings. Therefore, it is commonly referred to as ETFE lining. ■ Advantages of ETFE Coating ETFE has a low melting point and excellent processability, allowing for thick coatings on various substrate shapes. ■ Disadvantages of ETFE Coating On the other hand, because its molecular structure contains hydrogen (H), its heat resistance and chemical resistance are inferior compared to PTFE. ETFE coating requires the selection of materials and methods according to the application, environment, and substrate shape. Yoshida SKT offers ETFE coating services through powder coating and rotational molding (rotolining). *If you are considering ETFE coating, please feel free to contact us. For those considering various linings, please also check the "Basic Knowledge of Lining" PDF.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Methods to solve release defects in injection molding.

Methods to solve release defects in injection molding.

The astonishing durability that surpasses fluoropolymer coatings, "Bicoat," is a surface treatment suitable for applications subjected to mechanical stress. *Product and case materials are available.

**Main Causes of Release Failure in Injection Molding** Release failure is a common issue in the injection molding process. It often arises from excessive adhesion between the mold surface and the resin. This problem particularly occurs with complex shapes or thin-walled parts, where the resin strongly adheres to the mold surface. Surface roughness and insufficient draft angles can also worsen release properties. Additionally, high temperatures of the resin during release can contribute to release failure. "Bycoat® NYK-01" is a high-performance surface treatment that suppresses resin adhesion and wear in injection molding, thereby improving productivity. Its special coating, designed for use in high-temperature environments, achieves approximately double the lifespan compared to conventional surface treatments. This reduces the frequency of replacements and contributes to lower running costs. It has a proven track record with automotive motor parts manufacturers and has led to regular requests due to its reliable coating technology. **Features** ■ Incredible durability ■ High hardness, resistant to scratches ■ Excellent wear resistance ■ Outstanding non-stick and release properties ■ Safe for use in molds requiring micron-level precision *For more details, please refer to the PDF document or feel free to contact us.*

  • Other surface treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CAS (Ceramic Alloy System) for Conveyors for Transport Equipment

CAS (Ceramic Alloy System) for Conveyors for Transport Equipment

Eliminate adhesive troubles in conveyor transport! Improve productivity with high release properties!

In on-site conveyor transport, troubles caused by product adhesion and sticking are common. These issues can lead to decreased productivity and deterioration of product quality. Yoshida SKT's "CAS (Ceramic Alloy Coating)" is a revolutionary coating technology that combines high durability and excellent release properties. It achieves the formation of rounded convex surfaces, which was difficult with conventional thermal spraying techniques, thereby improving the release properties of adhesives and resins. 【Usage Scenarios】 - Conveyor transport in logistics sites - Decreased productivity due to adhesion and sticking of products - Deterioration of product quality - Increased cleaning burden 【Benefits of Implementation】 - Increased productivity by resolving adhesion troubles - Stabilization of product quality - Reduction in cleaning time - Decrease in maintenance costs

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
TP Coating: A fluororesin coating that innovates release properties on convex surfaces.

TP Coating: A fluororesin coating that innovates release properties on convex surfaces.

Forming fine convex surfaces with fluororesin to reduce contact area and improve release properties.

By forming a unique fine convex surface structure on the fluororesin coating, we solve challenges in high-temperature and high-load environments that conventional smooth coatings struggle to address. This is an innovative surface treatment technology that does not require processes like spraying or blasting and can be applied to thin plates and delicate components. 【Features】 ■ Reduces contact area with fine convex surface structure, achieving excellent release and lubricating properties ■ Durability over 10 times greater than conventional fluororesin coatings (based on case studies) ■ No need for spraying or blasting, suitable for thin plates and delicate components ■ Three series available to choose from according to application (TP-3○○ series, TP-4○○ series, TP-7○○ series)

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Contract Coating Service

Contract Coating Service

"Advancing stainless steel with cutting-edge surface treatment technology" High-performance contract coating services

■What about the surface of stainless steel? Among stainless steels, the surface of austenitic stainless steel (SUS304) is covered with a passive film, making it resistant to rust and maintaining a beautiful luster in normal environments. However, in specific environments, it may corrode, and when used as machine parts, properties such as slip resistance and wear resistance become necessary. 【Types of Surface Treatment and Coating for SUS304】 - Electrolytic polishing - Sandblasting / bead blasting - Plating - Teflon coating There are methods like the above to modify the surface of stainless steel. Generally, these methods provide sufficient functionality, but if you want to further enhance durability, slip resistance, and non-stick properties, we introduce a coating that can meet such demands. 'Bicoat,' with its hard coating of HV700-900 and the lubricating properties of fluororesin, combines wear resistance, slip resistance, and non-stick properties, making it recommended for those who are not satisfied with conventional surface treatments and coatings. For more detailed product information about 'Bicoat(R),' please download the PDF materials and take a look.

  • Other surface treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Coating

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.