Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
31～60 item / All 67 items
High-speed and long-lasting chamfering and V-grooving from centering.
Good bite performance and high-precision positioning are possible. Good machining surface due to sharp cutting edge shape. Multi-functional from centering to chamfering and V-groove processing.
High-efficiency deep hole machining drill
- Non-step processing is possible for deep holes ranging from 35D to 50D. (Standard products are available up to 30D.) - High efficiency and long lifespan in both wet and MQL conditions. - The cutting edge shape with low cutting resistance allows for long lifespan in deep hole machining of stainless steel.
Introducing general-purpose ball end mills along with processing examples.
The "JMB" is our standard ball end mill with AC coating. It is a product designed for general machining while achieving a higher level of machinability. 【Machining Example】 ■Tool Used: JMB-1 ■Material: NAK55 ■Machining Content: Contour machining ■Cutting Conditions ・Spindle Speed: 17520 min-1 ・Feed Rate: 1400 mm/min ・Depth of Cut: ae = 0.03 mm, ap = 0.03 mm *For more details, please refer to the PDF document or feel free to contact us.
For solid coatings, we will respond to a variety of requests!
We would like to introduce our "Special Carbide End Mills." The uses of carbide include brazing, pre-formed, and solid types, with shapes available in straight, twisted, radius, ball, taper, stepped, and general forms. The minimum processable outer diameter is φ1.5mm, and the maximum processable length is 600mm, with special surface treatment available in mirror finish. 【Product Lineup】 ■No.013 ■No.014 ■No.015 ■No.016 ■No.017 ■No.018 Sanyo Tool (our company) also accepts full custom orders for special tools made of diamond, cermet, and carbide. We propose unique special tools that differ from others by utilizing the concept of original tools. *For more details, please refer to the PDF document or feel free to contact us.
Crush medium-hard, hard, brittle samples, and fibrous samples in a short time! Supports simultaneous processing of multiple samples.
The "Vibration Disk Mill RS 300 XL" can grind medium-hard, hard, brittle samples, and fibrous samples to an analyzable particle size in a short time while minimizing sample loss. It also supports simultaneous processing of multiple samples (1 to 4). With a robust universal drive shaft, it can handle grinding sets of up to 30 kg. Samples are ground in a sealed state, allowing for safe operation. Designed to be robust, it is used in a wide range of fields including geology, mining, metals, cement, and thermal power plants. It demonstrates excellent performance in achieving final particle size and grinding processing time for sample preparation in spectroscopic analysis. 【Features】 - Uniform and reproducible sample preparation enabled by the universal drive shaft - Automatic reversal function (left/right rotation) - Interval setting function (automatic start/stop) - Choice of materials for grinding sets - Sealed/soundproof grinding chamber - Grinding jars are securely fixed with pneumatic pressure for convenience and safety - Optional automatic lifter makes it easy to set heavy grinding jars *For more details, please refer to the PDF document or feel free to contact us.
Anywhere, anyone can easily use it! A convenient motor for simple hole drilling and chamfering.
The "SMM" is a compact and portable chamfering motor. It is easy to operate, allowing anyone to use it, and the variable motor enables speed adjustment. It comes with a motor arbor and an 8mm drill chuck. Having one unit is very useful for various processes such as deburring with a shaft-mounted brush or finishing with a reamer. 【Features】 ■ Compact and easy to carry ■ Can be used with a 100V power supply, making it versatile ■ Speed adjustment available with a variable motor ■ Easy operation suitable for anyone ■ Accessories: motor arbor, 8mm drill chuck *For more details, please refer to the PDF document or feel free to contact us.
Introducing our equipment used for wet grinding and dispersion in aqueous and solvent systems!
Nihon Color Industry is engaged in contract processing using equipment employed for "wet grinding and dispersion (aqueous and solvent-based)." We possess a "horizontal bead mill" suitable for fine dispersion of inorganic particles (submicron), as well as a "hard-type bead mill." Our company provides optimal contract production with diverse equipment and technical capabilities. Please feel free to contact us when needed. 【Equipment Owned】 ■ Horizontal Bead Mills (Dyno-Mill, Ultra Bead Mill) - Dyno-Mill (Model KD-20BC 22kw) 16.5L × 6 units (all ceramic in contact parts) - Ultra Bead Mill 2.0L × 1 unit, 20.0L × 1 unit ■ Hard-Type Bead Mill (Glen Mill) - Model GM-1461 7.5kw 1 unit *For more details, please refer to the PDF document or feel free to contact us.
Simple with a modern design! A series that continues to be supported by many exercisers.
We offer the "Integrity + Cardio Series." This series, which has been continuously improved while maintaining long-standing reliability, is supported by many exercisers and features a simple, flexible, and modern design. We have available products such as the "Treadmill" with dimensions of 209×92×142 cm and the "Cross Trainer" with dimensions of 218×73×163 cm. 【Product Lineup】 ■ Treadmill ■ Elliptical Cross Trainer ・ Cross Trainer ■ Lifecycle Exercise Bike ・ Recumbent Bike ・ Upright Bike *For more details, please refer to the PDF materials or feel free to contact us.
Significantly improved efficiency possible! Case study of SKD11 finishing using end mills for vertical walls.
We would like to introduce a case study on the machining of 'SKD11 (X155 CrVMo 121)' using an end mill for vertical walls. The cutting tool used is the "HAM40-1571 finishing end mill," with a diameter of φ20mm and 8 cutting edges. 【Case Details】 ■ Material: SKD11 (X155 CrVMo 121) ■ Material tensile strength: 58-60HRC ■ Challenge: Hard milling with a cutting width of 65mm ■ Machining machine: POS mill ■ Adapter: SK 40 For more details, please refer to the catalog or feel free to contact us.
食事の量が少ない方への栄養補給に。
当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「ジャネフ 栄養サポート食品 ファインケア すっきりテイスト ミルク味 125ml」を取り扱っております。 1本（125ｍｌ）当たり200ｋｃａｌ、たんぱく質7.5ｇ、鉄4.0ｍｇ、亜鉛2.3ｍｇ。 エネルギーだけでなく、身体をつくる大切な栄養素であるたんぱく質の摂取も同時にサポート。 また、不足しがちな成分にも配慮した飲み切りサイズのドリンクです。
Improving machining surfaces and achieving long tool life! Introducing special end mills for difficult-to-machine materials along with processing examples.
"TWIN BEAT" is a special end mill for difficult-to-machine materials with AN coating. It is a finishing product developed for difficult-to-machine materials such as precipitation-hardened stainless steel and titanium alloys. By suppressing vibration, it has achieved improved machining surfaces and longer tool life. 【Machining Example】 ■Tool Used: TWBT-3 ■Material Being Machined: Ti 6AI 4V ■Machining Details: Side finishing ■Cutting Conditions ・Rotational Speed: 700 min-1 ・Cutting Speed: V=35 m/min ・Feed Rate: 210 mm/min ・Depth of Cut: ae=0.2 mm ap=40 mm *For more details, please refer to the PDF document or feel free to contact us.
Introducing end mills with a twist angle of 45° and a cutting edge tolerance of h8, ideal for steel and stainless steel!
The "PE Ultra Hard 4-Flute Solid High Helix End Mill" is an end mill suitable for steel and stainless steel. The recommended materials for this product are SS, SC, SCM, SKD (up to 50HRC), SUS, FC, and FCD. With the adoption of a TiSiN coating, it achieves a hardness of 3600Hv and a heat resistance temperature of 1100°C. *(Note: The 16mm and 20mm diameters have a TiAlN coating, hardness of 2800Hv, and heat resistance temperature of 800°C.)* The diameters available range from 3 to 20mm. 【Features】 ■ Medium size cutting length ■ Twist angle 45°, cutting edge tolerance h8 ■ TiSiN coating adopted ■ Recommended materials are SS, SC, SCM, SKD (up to 50HRC), SUS, FC, and FCD *For more details, please refer to the PDF document or feel free to contact us.*
Improved productivity and extended processing life! A highly versatile tool concept that accommodates various applications and work materials!
The "CoroMill Dura" is a carbide solid universal end mill capable of performing rough to finish machining under various workpiece materials. It features a cutting edge design that allows for use in many machining applications, and it can be re-sharpened and re-coated up to three times. It utilizes reliable material H10F and wear-resistant material GC1730. 【Features】 ■ Cutting length of 1-4×D, 2-7 flutes, with/without breaker ■ Cutting edge shape designed for use in many machining applications ■ Easy tool selection and user-friendly with plug-and-play and clear, simple display ■ Can be re-sharpened and re-coated up to three times *For more details, please refer to the PDF document or feel free to contact us.
Adopts a stylish new design. Since speed settings are possible, you can exercise safely.
The N685 is a self-propelled treadmill that converts kinetic energy into power for operation. Thanks to the adoption of a braking system, speed settings are possible. It is equipped with large touch keys that are easy to operate. Additionally, it can display data such as exercise time, speed, distance, calories burned, calories per hour, heart rate, load level, and wattage. 【Features】 ■ Operates by converting kinetic energy into power ■ Self-propelled ■ Adopts a stylish new design ■ Equipped with large touch keys for easy operation ■ Allows for safe exercise *For more details, please refer to the PDF document or feel free to contact us.
Designed for apartments and corporate fitness! Introducing the model for facilities with low usage frequency.
The "T635A" is a treadmill equipped with the "My Flex Plus TM" (deck cushioning system) that reduces the strain on joints such as the knees and ankles. Designed for apartment and corporate fitness use. It is a model suitable for facilities with light usage. Additionally, with the standard automatic lubrication system, it reduces the maintenance burden for users' machines. 【Features】 ■ Reduces strain on joints such as knees and ankles with the "My Flex Plus TM" system ■ Standard automatic lubrication system reduces the maintenance burden for users' machines *For more details, please refer to the PDF document or feel free to contact us.
Significantly improved efficiency possible! Case study of tool steel finishing using end mills for vertical walls.
We would like to introduce a case study on "Machining Tool Steel (40 CrMnMoS 86) using a vertical wall end mill." The cutting tool used is the "HAM40-1571 finishing end mill," with a blade diameter of φ25mm and 8 blades, showcasing both rough and finishing machining. 【Case Details】 ■ Material: Tool Steel (40 CrMnMoS 86) ■ Material Tensile Strength: 1100N/mm² ■ Challenge: Finishing ■ Machining Machine: 100V hi-dyn ■ Adapter: SK 40 For more details, please refer to the catalog or feel free to contact us.
Significantly improved efficiency possible! Case study of electrical steel finishing using end mills for vertical walls.
We would like to introduce a case study on the machining of electrical steel (M350-50A) using an end mill for vertical walls. The cutting tool used is the "HAM40-1571 finishing end mill," with a diameter of φ32mm and 8 cutting edges, demonstrating both rough and finishing machining. 【Case Details】 ■ Material: Thyssen Krupp Steel M350-50 ■ Material Tensile Strength: 460N/mm² ■ Challenge: Stable milling processing ■ Machining Machine: Burkhardt & Weber ■ Adapter: SK 50 For more details, please refer to the catalog or feel free to contact us.
セラミックコーヒーミルです。
当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「コーヒーミル【ピュア】 MI-015」を取り扱っております。 セラミック刃なので、金属臭がなく、コーヒー本来の風味を損ないません。 粗さ調節ネジでお好みの粗さが選べます。 摩耗しにくく、使い始めの挽き味が持続します。 クリアーなフタ・容器で中身を確認しながら挽くことができます。 挽き立ての美味しさをお楽しみください。 セラミック刃は取外しができ、水洗いしても錆びず いつでも清潔にお使いいただけます。 （内刃のみ）
Ultimate small particle size created by jet streams! Jet mill equipped with high-performance classifier.
The Jet Mill series "JEDI" is a fluidized bed jet mill uniquely developed by Airstec. It is equipped with a high-performance classifier, allowing for the production of ground materials with small particle sizes and a sharp particle size distribution. We also offer the counter-type jet mill "JEDI-SC," which features a fixed classification mechanism. 【Features of JEDI】 ■ Small particle size grinding and sharp particle size distribution achieved with a high-performance classifier ■ Capable of grinding heat-sensitive materials ■ Contamination-free ■ GMP compliant (optional) For more details, please refer to the catalog or feel free to contact us.
Plate mill equipped with dedicated machining functions for plate mold bases.
The "3M" is a plate mill that achieves the high operability and productivity required by operators. It was developed to efficiently process the upper and lower surfaces of plates with six-sided machining. The "AUTO mode" condenses the excellent machining techniques and know-how of skilled workers into TAKEDA's original touch panel operation box, an interactive milling program, and a material thickness measurement device, enabling high productivity and precision similar to that of skilled workers with simple operations. Additionally, the "MANUAL mode" allows for general operations with a Z-axis hand handle and an XYZ-axis monolever. [Features] - Intuitive operability - TAKEDA E.C.O.S. - Equipped with functions that condense the excellent know-how of skilled workers - Advanced machining possible with simple operations For more details, please refer to the catalog or feel free to contact us.
Equipped with "energy-saving mode." It can cut standby power when not in use.
The "T655L" is a treadmill equipped with a 5HP AC servo motor. Thanks to SportArt's special technology, it enables high torque drive even at low speeds, resulting in excellent stability during low-speed operation and effective energy savings. Additionally, it comes standard with an automatic lubrication system, reducing the maintenance burden for users. Furthermore, with the "Safe start" feature, the minimum speed is set at 0.2 km/h, making it suitable for rehabilitation use. 【Features】 ■ Equipped with "Energy-saving mode" ■ Cuts standby power when not in use ■ Reduces maintenance burden with the automatic lubrication system ■ Equipped with a 5HP AC servo motor ■ Excellent stability at low speeds and effective energy savings *For more details, please refer to the PDF document or feel free to contact us.
![Bead Mill Multi Lab [Bead Mill for Research and Development / Small-Scale Production]](https://image.mono.ipros.com/public/product/image/889/2000072636/IPROS5153257470792585035.jpg?w=280&h=280)
It accommodates a wide range of applications, from research and development to sample production.
The DYNO-MILL Multi Lab is designed for batch processing, allowing for wet dispersion and grinding of microorganisms and cell bodies for research and development in various fields, including pharmaceuticals and food, in small quantities. In continuous operation, various materials for disks and cylinders can be selected. It is widely used as a small production machine for developing new products, formulating mixtures, and producing samples. *For more details, please download the catalog.*
Special bottom blade shape! A tool that also supports environmentally friendly dry processing.
The "Prism series" is a three-flute end mill developed specifically for the machining of non-ferrous metals such as aluminum alloys and aluminum die-cast. It achieves excellent cutting performance for side machining, groove machining, and dry cutting in the Z direction, along with high machining precision. We offer three types: "Carbide 3-Flute Square," "Carbide 3-Flute Radius," and "Carbide 3-Flute Ball." 【Features】 ○ Ultra-thin DLC coating → Achieved thin film through a unique coating process ○ Special bottom blade shape → The bottom blade edge is curved, producing a glossy finish ○ Cutting edge design optimized for high efficiency ○ Compatible with environmentally friendly dry machining (φ1.0 to φ20.0) For more details, please contact us or download the catalog.
With "Safe start TM," the minimum speed is 0.2 km/h, making it suitable for use in rehabilitation.
The T655MJ is a treadmill equipped with reverse running and reverse incline modes, as well as long handrails as standard features. It is powered by a 5HP AC servo motor. Thanks to SportsArt's special technology, it excels in stability at low speeds and is effective in saving electricity. Additionally, the inclusion of the "My Flex Plus TM" (deck cushioning system) reduces the strain on joints such as the knees and ankles. 【Features】 ■ Standard equipped with reverse running and reverse incline modes ■ Standard equipped with long handrails ■ Passes the leakage current test with a European medical standard of 0.3mA or less ■ Excellent stability at low speeds and effective in saving electricity ■ The inclusion of "My Flex Plus TM" reduces strain on joints such as the knees and ankles *For more details, please refer to the PDF document or feel free to contact us.
Concentrate energy on a single point to achieve high efficiency! A mill that makes it easy to control additional energy.
The "Converge Mill" is a media mill that efficiently concentrates energy addition at a single point. Despite being point-focused, it allows for short processing times. It generates little heat, suppresses agglomeration, and achieves a high recovery rate of processed powders. It is ideal for mechanochemical and mechanical alloying treatments. 【Features】 ■ Concentrates energy at a single point to achieve high efficiency ■ Easy control of added energy by varying the rotation speed ■ Significantly low noise, greatly improving the working environment ■ Capable of high-speed, uniform micro-grinding of brittle materials ■ Realizes large containers ranging from several tens of cc to 100 liters For more details, please refer to the catalog or feel free to contact us.
Significantly improved efficiency is possible! Case study of processing general structural steel using end mills for vertical walls.
We would like to introduce a case study of processing "General Structural Steel (St 37)" using an end mill for vertical walls. The cutting tool used is the "HAM40-1571 finishing end mill," with a blade diameter of φ32mm and 8 blades. 【Case Details】 ■ Material: St 37 ■ Material Tensile Strength: 310-510 N/mm² ■ Challenge: Smooth processing ■ Processing Machine: SORALUCE ■ Adapter: SK 50 For more details, please refer to the catalog or feel free to contact us.
All types of dry materials can be crushed! Any raw material that can be broken with a hammer can be crushed.
The hammer mill is a grinding machine capable of coarse to fine grinding by changing the mesh screen. It crushes materials through the impact of swinging hammers. It can grind a wide range of dry materials. In addition to powdering experimental samples, it can also be used as a small-scale production facility. Its high versatility and large input size allow for grinding from coarse to fine. It is used for general food materials, ores, shells, wood, traditional Chinese medicine, and more. 【Features】 - Accurate grinding particle size can be achieved by selecting the screen. - Suitable for all raw materials that can be broken with a hammer. - Moist raw materials cannot be ground. - Capable of grinding several kilograms per hour (varies by material). - Fineness after grinding: 100µm to several mm. For more details, please contact us or download the catalog.
Starting from Φ0.3mm, we offer a lineup for steel, non-ferrous metals, and finishing applications.
XIATEC is a tool manufacturer specializing in small diameter, ultra-small diameter, and micro tools under 4mm, holding the number one market share in China in the small diameter field. Founded in 1995 as a specialized factory for small diameter tools under Toshiba Tungaloy, it has since become part of the MAIDA Group, which is backed by Chinese capital, after being under the IMC Group. The end mill series ranges from Φ0.3mm to 4mm and can be customized. 【End Mill Series】 - Φ0.3mm to 4mm - Available in 2-flute and 3-flute options for steel machining, finishing, and non-ferrous metal machining.
From medium-hard to hard brittle samples with a Mohs hardness of up to 8! Crushing in batch or semi-continuous mode!
The "Disk Mill DM200" is designed for batch or semi-continuous coarse and fine grinding of brittle samples ranging from medium-hard to hard, with a Mohs hardness of up to 8. Samples are crushed through the pressure and friction between two disks. The gap width between the disks can be adjusted continuously from 0.1 to 5 mm. Due to its robust structure, it can be used not only in analytical laboratories but also in pilot plants, making it suitable for online quality control of raw materials in production environments. 【Features】 - High processing capacity - High reproducibility with adjustable gap width between disks - Large and open grinding chamber for easy cleaning - Long-lasting grinding set - Material selection to prevent contamination - Equipped with a dust extraction module - Can be combined with the Jaw Crusher BB200 for bulk sample grinding *For more details, please refer to the PDF document or feel free to contact us.
