Plateのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Plate×アイテック - メーカー・企業と製品の一覧

Plateの製品一覧

1～7 件を表示 ／ 全 7 件

表示件数
[Example] Gas nitriding (heat treatment) of clutch plates

[Example] Gas nitriding (heat treatment) of clutch plates

Case of heat treatment "gas soft nitriding treatment" for automotive parts "clutch plate".

This is an introduction to the case of heat treatment "gas nitriding" for automotive clutch components, specifically "clutch plates." We can accommodate gas nitriding with materials provided. ITEC's gas nitriding results in a clean finish due to air cooling. 【Processing Details】 Thickness: 1.2mm, Material: SPCC-8B Gas Nitriding *For more details, please refer to the PDF available for download.

  • Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Example] Wire cut and heat treatment for "clutch plate" for racing bikes.

[Example] Wire cut and heat treatment for "clutch plate" for racing bikes.

Flatness below 0.02! Introduction of examples of wire cut and heat-treated "clutch plates" for racing bikes.

This is an introduction to the case of wire cutting and heat treatment for the "clutch plate" used in Moto GP racing bikes. The process design takes into account heat treatment distortion, keeping flatness to 0.02 or less. Additionally, the between diameter is within ±0.05. 【Processing Details】 Product Name: Clutch Plate for Racing Bikes Lot: 1 piece Flatness: 0.02 or less Between Diameter: ±0.05 or less *For more details, please refer to the PDF available for download.

  • Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Motorcycle parts "drive plate" mold design, precision shearing, gas nitriding.

Motorcycle parts "drive plate" mold design, precision shearing, gas nitriding.

Cost reduction of 9.50 yen per unit! Introduction of a case study on the integrated production of motorcycle parts "drive plates," including mold design, precision shearing, and gas soft nitriding treatment.

This is a case study of the integrated production of motorcycle parts "drive plates," including mold design, precision shearing, and gas nitriding treatment. We provide comprehensive support from mold design to press processing (precision shearing) and gas nitriding treatment. Coining is done up to a height of 5mm with a plate thickness of t=3.2mm. Previously, pin fastening was used, but by switching to pressing, we achieved a cost reduction of 9.50 yen per piece. 【Processing Details】 Product Name: Drive Plate Lot: Capable of handling up to 10,000 pieces/month Processing: Mold design → Press processing (precision shearing) → Gas nitriding treatment Coining is done up to a height of 5mm with a plate thickness of t=3.2mm. *For more details, please refer to the PDF available for download.

  • Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Nitriding heat treatment for clutch plates (low distortion heat treatment)

Nitriding heat treatment for clutch plates (low distortion heat treatment)

Introduction of case studies on nitriding hardening (low distortion heat treatment) for automotive parts "clutch plates".

This is an introduction to the case of nitriding hardening (low distortion heat treatment) for automotive parts "clutch plate (SPCC)." The thickness varies by part number, ranging from t=1.0 to 4.0, with the material being SPCC. Additionally, nitriding hardening treatment is also possible for other materials such as SCM. A notable feature is that the heat treatment distortion is less than half that of carburizing nitriding, and while conventional carburizing nitriding required flatness correction afterward, nitriding hardening does not require this due to its low distortion. 【Details of the case】 Product name: Clutch plate Lot: 1000 pieces Specifications: Hardness HV800 or higher, depth 0.04mm (actual) *For more details on nitriding hardening, please refer to the PDF available for download.

  • Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Example] Precision Shearing Press SPCC Carburizing and Nitriding Treatment Integrated Support

[Example] Precision Shearing Press SPCC Carburizing and Nitriding Treatment Integrated Support

A case of integrated production from mold design of automotive parts clutch plates to precision shearing and carburizing-nitriding treatment.

This is an introduction to a case of integrated production from mold design, precision shearing, to carburizing and nitriding treatment for automotive parts clutch plates. The thickness varies by part number, ranging from t=1.0 to 4.0, with a material of SPCC. 【Processing Details】 Product Name: Clutch Plate Lot: 500 to 50,000 pieces/month Press processing dimensional accuracy: 5/100, and the accuracy after heat treatment is ±0.1 *For more details, please refer to the PDF available for download.

  • Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Example] Integrated processing from progressive press to heat treatment of guide plates.

[Example] Integrated processing from progressive press to heat treatment of guide plates.

A case of integrated production from progressive stamping to heat treatment of the "guide plate" around the clutch plate for automotive parts.

This is an introduction to a case of integrated production from progressive stamping to heat treatment of the "guide plate" around the clutch plate for automotive parts. We have a proven track record of producing 100,000 units per month! 【Processing Details】 Product Name: Guide Plate Lot: 5,000 *For more details, please refer to the PDF available for download.

  • Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Example] Progressive stamping and carburizing-nitriding of interlock plates.

[Example] Progressive stamping and carburizing-nitriding of interlock plates.

Case study of low-distortion heat treatment "carburizing and nitriding" from progressive die stamping (U-shaped) of automotive parts "interlock plate".

This is an introduction to a case of low-distortion heat treatment "carburizing and nitriding" for automotive parts "interlock plates" processed by progressive stamping (U-shaped). The heat treatment is performed after bending into a U-shape, and by controlling deformation during heat treatment, we meet the specifications without the need for correction. 【Processing Details】 Product Name: Interlock Plate Lot: 1000 pieces Material: SPHC, Thickness: 3.6mm Processing: Progressive stamping + carburizing and nitriding *For more details, please refer to the PDF available for download.

  • Other machine elements

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Plateに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.