Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
46～60 item / All 497 items
24-bit isolated AD converter board. Conversion speed from 5 sps to 31.25 k sps.
A 24-bit isolated AD converter board equipped with Analog Devices' AD7172BRUZ. Conversion speed from 5 sps to 31.25k sps. Connects to a computer via USB for use.
An LED lighting transmission light that can be incident has been born!
By replacing the light source unit without changing the transmission light body, you can achieve long life while maintaining the uniformity of the transmission light.
Ensure power supply during disasters! Long-lasting backup with large-capacity storage batteries!
The "YSB Series" is a power system optimized for long-duration backup. Equipped with long-life, high-capacity storage batteries, it achieves long-duration backup that typical UPS systems cannot support. It backs up loads that cannot afford to stop even during prolonged power outages due to disasters, supporting business continuity. The YSB Series offers two types tailored to different scenarios: (1) The <Slim Type> YSB-5K, which can be installed like a bookshelf (2) The <Caster Type> YSB-5KC, which requires no installation work for transport 【Features】 ■ High output: Single-phase 2-wire 100V 5kVA/4kW ■ Large capacity: 8.2kWh (nominal capacity) ■ High efficiency: Over 97% during normal operation / Over 93% during autonomous operation (rated operation) ■ Fast switching: Switches within 10ms during power outages/restorations ■ Overload tolerance of 120% (for 1 minute), allowing use with loads that generate inrush currents, such as incubators ■ Long-life domestic lead-acid batteries adopted (expected lifespan of about 10 years) ■ Maintenance cycle of 10 years significantly reduces running costs ■ Batteries can be expanded up to a maximum of 4 units *For more details, please refer to the PDF document or feel free to contact us.
Backup for several hours to several days is possible! The "SFT-D series" uninterruptible power supply enables long-term backup in conjunction with generators.
The best solution for long-term power outages is a generator, but there is a delay between the occurrence of the outage and the startup of the generator. The SFT-D series is an uninterruptible power supply (UPS) designed to fill that gap. This device uses its built-in battery to supply power without interruption during an outage while simultaneously starting the generator. Once the generator is confirmed to be operating stably, it switches from battery power to generator power. Additionally, when the power outage is resolved, it synchronizes with the commercial power supply before switching back to it. 【Features】 - It has the ability to absorb noise and surges since it is always powered by an inverter. - The switching time during power outages and restorations is instantaneous and does not affect the load at all. In the event of a device malfunction or overload, it automatically switches to bypass mode without interruption. - After recovering from an overload, it automatically returns to inverter power (auto-return). - The generator uses low-cost diesel fuel. - It operates at low noise levels, minimizing external impact. *The generator is sold separately.
DC power supply (switching power supply)
- Global compatibility Products compliant with UL/CSA/CE standards UL compliant with UL508 standard, usable up to 100% RoHS directive compliant products NEC Class II compliant products - Wide input voltage range Single-phase AC 100-240V (85-264V) Three-phase AC 400-500V (320-575V) Can be directly connected to three-phase AC power, eliminating the need for a control transformer Therefore, it simplifies panel miniaturization and temperature management within the panel - Output voltages are DC12V and DC24V - 150% overload capability
Compactly store your tablet PC! With a one-touch push on the front panel, the tray locks and releases!
The "Tablet PC Console Unit" is a 19-inch rack mount type product that allows for compact storage of tablet PCs. It can store and be used with a minimum of 1 unit, accommodating many tablet PCs ranging from 9.7 inches to 12.9 inches. Additionally, the operating angle can be adjusted in increments of 6° from 0° to 90° (lock release above 90°). 【Features】 ■ Unique mechanism allows for easy selection of vertical or horizontal use of the tablet PC ■ Standard brackets that can be mounted between the front and rear 19-inch frame with a pitch of 497 to 797 ■ Equipped with a cable carrier for cable protection ■ The tablet PC holding section uses anti-theft bolts (with a dedicated wrench) *For more details, please refer to the PDF document or feel free to contact us.
We detect arcs with a resolution of 1 microsecond, contributing to improved yield. It is also optimal as a pulse monitor.
- Monitor the fluctuations of current and voltage with a high resolution of 1 microsecond and detect anomalies. - Can be easily installed between the RF power supply and the matching box. - Communication is possible via Ethernet Net (CAT) and other means.
The ideal UPS (uninterruptible power supply) for factories and office computers.
★ Regardless of the power supply situation, the UPS automatically selects the appropriate power supply mode that matches the condition, adopting a hybrid method that balances energy saving and high reliability. When the power supply situation is good, it operates in efficiency priority mode; when the power supply situation is poor, it operates in power quality priority mode; and when the load power factor is poor, it operates in active filter mode to suppress harmonics generated from the load and improve the power factor. ★ The main unit's capacity includes six models for the 100V series: 350VA, 750VA, 1KVA, 1.5KVA, 2KVA, and 3KVA. The 200V series offers three models: 1KVA, 2KVA, and 3KVA. ★ It features a shape that allows for vertical and horizontal placement, as well as installation in a 19-inch rack. ★ A dedicated power management software is included as standard, allowing users to easily check the UPS status on PCs or servers, set shutdown configurations, and with the optional LAN interface card, continuously monitor and report the power status, enabling quick responses to power outages. ★ The backup time during a power outage is standard at 5 minutes, but it can be extended by adding additional batteries.
This is a wide-range input UPS for areas with significant fluctuations in commercial power supply.
It is the optimal UPS for using IT systems with power from generators that have voltage and frequency fluctuations.
The output voltage standing wave ratio (VSWR) is low, and it excels in the flatness of the output excess noise ratio.
A noise source is a device that can generate a random continuous spectrum signal. A properly functioning noise source must have stable output noise power and a uniform power spectral density within the specified frequency band. We offer various solid-state coaxial noise sources in the frequency range of 10 MHz to 50 GHz. This includes the Smart Series and Standard Series, which have the advantage of a wide frequency range. They exhibit low output voltage standing wave ratio (VSWR) and excellent flatness of output excess noise ratio, among other features. The Smart Noise Source employs I2C bus technology to enable automatic downloads and improve measurement speed. Equipped with a digital temperature sensor, it allows the host to automatically monitor changes in ambient temperature, correcting the temperature for noise figure measurements and enhancing measurement accuracy. The standard noise source requires a pulse voltage drive of +28V. Together with a solid-state noise source and a noise figure analyzer, we provide a complete solution for measuring noise figures at microwave and millimeter-wave frequencies.
Ultra-lightweight! Among products with the same output of military-grade UPS (uninterruptible power supply), it is the smallest and lightest class! Proven performance on battleships, patrol boats, and aircraft carriers.
SynQor's military-grade UPS is designed to meet the harsh environmental and electrical conditions required for defense (military) applications. It utilizes its own proven high-efficiency and reliable converter technology, along with robust packaging technology. It accepts a wide range of input voltages and frequencies, providing uninterrupted power in good condition even during power outages. 【Compliance Standards】 ■MIL-STD-704F: Aircraft Power ■MIL-STD-1399-300B: Shipboard Power ■MIL-STD-1275D: Vehicle Power ■MIL-STD-461F: EMI ■MIL-STD-810G: Environmental Performance 【Product Features】 ■Dustproof and waterproof structure with excellent environmental and shock resistance ■Always-on inverter, double conversion method ■AC input voltage range: AC80–265V, 47–65Hz or 47–800Hz ■Wide range AC input frequency: 47Hz–800Hz ■Three-phase AC input 85–140Vrms (147–242Vrms L-L) ■Output voltage: Sine wave, AC115/230V, 50/60/400Hz The items marked with "※" are optional.
Stable supply even during power outages! High-reliability UPS (uninterruptible power supply) system with AC 60V output and emergency input support.
● NMPS615A (NMPS-615-A) is an uninterruptible power supply (AC60V type) manufactured by Nippon Antenna. ● It is an uninterruptible power supply for large-scale CATV facilities. ● In the event of a power outage, it automatically switches to battery power and supplies AC60V to the shared reception facility. ● It is equipped with an STM output terminal (contact output terminal). It also has measurement terminals for checking load current, making maintenance and inspection easy. ● To prepare for power outages lasting more than 2 hours or unforeseen circumstances, a 100V emergency input connector is provided. ● Please choose a steel pipe pole with a diameter of φ140 to 350mm for installation. ● It comes in a stainless steel drip-proof case. ● Please choose a steel pipe pole with a diameter of φ140 to 350mm for installation. *For more details, please feel free to contact us.*
There is a possibility that the power supply may be interrupted with just a UPS.
The reality is that a UPS (Uninterruptible Power Supply) alone cannot handle failures. A combination of a UPS and an STS (Static Transfer Switch) can achieve high reliability in power supply.
Adopting SiC-MOSFET as the switching element significantly reduces power loss.
The "High Voltage Semiconductor Switch" is a power supply device that generates high-speed pulses at high voltage. It connects 90 FETs in series to achieve switching of up to 90kV. The operating frequency allows for pulse operation from DC to 5kHz. Additionally, it has advantages such as low on-resistance and high-speed switching, and it incorporates two 90kV switch units for power supply and discharge. We handle everything from the design and development of the switch unit circuit board, manufacturing and adjustment, to the creation of cooling systems, leading to product commercialization. 【Applications】 ■ Pulse power supply for gyrotrons in fusion devices ■ Pulse power supply for EUV lasers ■ Medical X-ray control ■ Pulse power supply for klystrons in accelerators *For more details, please refer to the PDF document or feel free to contact us.
Supports everything from roll heating to plate heating. Energy-saving design with natural air cooling system adopted.
This is a device that instantaneously heats the substrate by passing it through the work coil. By combining Wedge's uniquely designed heating power supply with original coils, efficient heating can be achieved. 【Features】 ● It is equipped with an automatic tracking circuit to ensure the best matching against load fluctuations. This is an energy-saving design that can operate at optimal efficiency. ● The work coil adopts a natural air cooling system, so there are no issues related to cooling water like those found in water-cooled systems. ● For large machines, a parallel split type is recommended to consider maintenance in case of trouble. (Example: 100KW equipment → 20KW × 5 units connected in parallel) ● For more details, please contact Wedge Corporation, Electrical Division, Sales Representative: Uesugi. TEL: 06-6885-6273 / FAX: 06-6885-6274 / E-mail: info.wedge-d@webcatch.jp - Mentioning that you saw this on "Ipros" will help ensure a smooth response.
