We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Probe.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Probe×テイエスエスジャパン - List of Manufacturers, Suppliers, Companies and Products

Probe Product List

16～30 item / All 51 items

Displayed results
RF-E 09 (E field electric field probe)

RF-E 09 (E field electric field probe)

The same basic structure as the "RF-E 03" and "RF-E 04" probes!

The RF-E 09 electric field probe is a passive near-field probe designed for use with scanners manufactured by Langer. The electrodes of the probe head detect separated electric fields on the surface of ICs. It functions well within a distance of 0.5 to 10 mm from the assembly. By placing and holding small square electrode surfaces on components or printed circuit boards, it can detect sources of electrical interference. 【Specifications】 ■ Type: Near-field probe ■ Size: 10x10 mm probe head ■ Frequency range: 30 MHz to 3 GHz ■ Connector: SMB male, Jack *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
LF-R 400 (H field magnetic probe)

LF-R 400 (H field magnetic probe)

The larger the tip diameter, the higher the sensitivity, allowing for the detection of a wider area of the magnetic field!

The "LF-R 400 Magnetic Field Probe" is a passive near-field probe with a head size of 25mm in diameter, featuring high sensitivity and suitable for measurements within a maximum range of 10cm around assemblies and devices. Langer's near-field probes are compact and very easy to use, and they are electrically well shielded due to the current-damping sheath. It can be connected to a spectrum analyzer or oscilloscope with a 50Ω input. The magnetic field probes in the "LF series" do not have a built-in 50Ω termination resistor. 【Specifications】 ■ Type: Near-field Probe ■ Size: Φ25mm Probe Head ■ Frequency Range: 100kHz to 50MHz ■ Connector: SMB male, Jack *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
LF-B 3 (H field magnetic field probe)

LF-B 3 (H field magnetic field probe)

You can approach difficult-to-access printed circuit boards, etc., that are sandwiched between components from above!

The "LF-B 3 Magnetic Field Probe" is a passive near-field probe, with the internal coil arranged perpendicular to the shaft. When the probe head is used vertically against the assembly or device being measured, accurate measurements can be obtained. This product detects magnetic field lines radiating at a 90° angle from the object being measured and does not detect magnetic field lines entering from the side. Langer's near-field probes are compact and very easy to use, and they are electrically well-shielded by a current-damping sheath. 【Specifications】 ■ Type: Near-field Probe ■ Size: Φ4mm Probe Head ■ Frequency Range: 100kHz to 50MHz ■ Connector: SMB male, Jack ■ Resolution: 2mm *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
LF-K 7 (H field magnetic field probe)

LF-K 7 (H field magnetic field probe)

Half-circular magnetic field lines are generated along the edges of linear, rod-shaped components, cable connectors, and flat structural parts.

The "LF-K 7 Magnetic Field Probe" is a passive near-field probe that detects semicircular magnetic field lines using two coils. The probe functions like a coupling clamp. Unlike the "LF-U 5" probe, it does not detect magnetic field lines entering from the side. The magnetic field enters through the first coil, curves in a circular shape within the probe head, and detects the uneven magnetic field exiting through the second coil. It does not detect overlapping uniform magnetic fields. 【Specifications】 ■ Type: Near-field probe ■ Size: 6×10mm probe head ■ Frequency range: 100kHz to 50MHz ■ Connector: SMB male, Jack ■ Resolution: 5mm *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MFA 01 Set (Active Magnetic Field Probe)

MFA 01 Set (Active Magnetic Field Probe)

Each microprobe has a built-in preamplifier! The delivery includes correction data.

The "MFA 01 Set" includes three high-resolution magnetic field microprobes capable of measuring magnetic fields up to 6GHz in signal conductors (150μm), SMD components, or IC pins, along with a bias tee and a dedicated cable. Each microprobe has a built-in preamplifier. The preamplifier (9V, 100mA) is powered through a bias tee BT 706 with a 50-ohm impedance, and the magnetic field microprobes are connected to a spectrum analyzer or oscilloscope via the BT 706. 【Specifications】 ■ Type: PCB Emission Near-Field Microprobe ■ Supported Frequency Range: 1MHz to 6GHz *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MFA-K 0.1-12 (Magnetic Field Microprobe)

MFA-K 0.1-12 (Magnetic Field Microprobe)

Equipped with a very small probe head that functions like a coupling clamp, it is suitable for measuring RF magnetic fields up to 6 GHz.

The "MFA-K 0.1-12 Magnetic Field Microprobe" is an active near-field microprobe that requires a BT 706 bias tee to operate. It is capable of measuring current on IC pins and fine conductive paths (150μm) on components. It has the same basic structure as the "MFA-K 0.1-30," but with different frequency characteristics. Thanks to its special probe head design, it does not detect magnetic field lines generated from adjacent conductors. 【Specifications】 ■ Type: Near-field Microprobe ■ Size: Microchip size ■ Supported Frequency Range: 100MHz to 6GHz ■ Connector: SMA female, Jack ■ Resolution: 200μm *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MFA-R 0.2-75 (Magnetic Field Microprobe)

MFA-R 0.2-75 (Magnetic Field Microprobe)

Equipped with a very small and high-resolution probe head, it is suitable for measuring RF magnetic fields up to 1 GHz.

The "MFA-R 0.2-75 Magnetic Field Micro Probe" is an active near-field microprobe that requires a BT 706 bias tee to operate. The probe head has a built-in preamplifier (9V, 100mA), and power is supplied through the BT 706 with an impedance of 50Ω, allowing connection to a spectrum analyzer or oscilloscope via the BT 706. Langer's near-field microprobes are ultra-compact and very easy to use, and they are electrically well-shielded due to the current-damping sheath. 【Specifications】 ■ Type: Near-field microprobe ■ Size: Microchip-like ■ Frequency range: 1MHz to 1GHz ■ Connector: SMA female, Jack ■ Resolution: 300μm *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MFA-K 0.1-30 (Magnetic Field Microprobe)

MFA-K 0.1-30 (Magnetic Field Microprobe)

Equipped with a very small probe head that functions like a coupling clamp, it is suitable for measuring RF magnetic fields up to 1 GHz.

The "MFA-K 0.1-30 Magnetic Field Microprobe" is an active near-field microprobe that requires a BT 706 bias tee to operate. The direction of the coil in the probe head is marked with a black dot, so please check the orientation before measurement. Additionally, the delivery includes calibration data. Please use the calibration data to convert the probe's output voltage to either the magnetic field or the current flowing through the conductor. 【Specifications】 ■ Type: Near-field Microprobe ■ Size: Microchip size ■ Supported Frequency Range: 1MHz to 1GHz ■ Connector: SMA female, Jack ■ Resolution: 200μm *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
CM-SHP Custom Probe

CM-SHP Custom Probe

Langer Corporation also manufactures special-shaped near-field probes according to customer requirements!

At Teess Japan Co., Ltd., we handle the "CM-SHP Custom Probe." Langer manufactures special-shaped near-field probes according to customer requirements. Please feel free to contact us when you need assistance. 【Specifications】 ■ Type: Near-field Probe *For more details, please refer to the related links or feel free to contact us.

  • EMC/Static electricity measuring equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
EMC Antenna Schwarzbeck Field Probe

EMC Antenna Schwarzbeck Field Probe

Introducing antennas with a frequency range of 9kHz to 3.3GHz for EMC (EMI/EMS) and antenna measurements!

We would like to introduce the "Schwarzbeck Field Probe" that we handle. It is suitable for EMC (EMI/EMS) and antenna measurements. The type is a field probe. The supported frequency range is from 9 kHz to 3.3 GHz. Please feel free to contact us if you have any inquiries. 【Features】 ■ Type: Field Probe ■ Supported Frequency Range: 9 kHz to 3.3 GHz *For more details, please refer to the related links or feel free to contact us.

  • antenna

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HR-R 8-1 Set (Magnetic Field Probe)

HR-R 8-1 Set (Magnetic Field Probe)

Frequency range: up to 40GHz! PCB emission near-field probe type.

The "HR-R 8-1 Set (Magnetic Field Probe)" includes the HR-R 8-1 B magnetic field probe. This probe enables magnetic field measurements of up to 40GHz. The probe head of the HR-R 8-1 is designed to measure ICs, circuit board structures, and components, allowing for the identification of high-frequency magnetic field locations. [Set Contents] ■ HR-R 8-1: Near-field probe ~40GHz B-field ■ CS-ESA: ViewerChipScan-ESA Viewer Software/USB ■ HR-R char: HR-R 8-1 individual data ■ User manual ■ Case *For more details, please download the PDF (English version) or feel free to contact us.

  • EMC countermeasure products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SX1 set (magnetic field and electric field probe)

SX1 set (magnetic field and electric field probe)

It is possible to inspect IC pins, conductive paths, components, and connectors, and identify interference sources!

The "SX1 Set (Magnetic and Electric Field Probes)" includes three passive magnetic field probes and one dedicated cable. It is capable of measuring electric and magnetic fields in the high clock frequency range of 1GHz to 10GHz on electronic assemblies and ICs during the development process. Langer's near-field probes are compact and very easy to use, and they are electrically well-shielded due to the current-damping sheath. 【Set Contents】 ■SX-E 03: E-Field Probe 1GHz–10GHz ■SX-B 3-1: H-Field Probe 1GHz–10GHz ■SX-R 3-1: H-Field Probe 1GHz–10GHz ■SMA-SMA: 1m Cable ■Case *For more details, please refer to the related links or feel free to contact us.

  • EMC countermeasure products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SX-R 20-1 Set (Magnetic Field Probe)

SX-R 20-1 Set (Magnetic Field Probe)

It is also possible to detect the direction and distribution of the magnetic field in electronic assemblies!

The "SX-R 20-1 Set (Magnetic Field Probe)" includes a passive magnetic field probe for measuring high-frequency magnetic fields up to 20GHz during the development process, along with one dedicated cable. The probe head of the SX-R 20-1 can measure at positions close to electronic assemblies. It can inspect IC pins, conductive paths, components, and connectors, allowing for the identification of interference sources. [Set Contents] ■SX-R 20-1: H-Field Probe 1GHz to 20GHz ■SMA-SMA: 1m cable ■Case *For more details, please refer to the related links or feel free to contact us.

  • EMC countermeasure products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF2 Set (Magnetic Field Probe)

RF2 Set (Magnetic Field Probe)

Can be connected to a 50Ω input spectrum analyzer or oscilloscope!

The "RF2 Near-Field Probe Set" includes four passive magnetic field probes and one dedicated cable. It can measure electric and magnetic fields from 30MHz to 3GHz on electronic assemblies during the development process. The probe heads in this set can progressively identify the locations of RF magnetic field interference sources on electronic assemblies. 【Set Contents】 ■RF-R 400-1: H-Field Probe 30MHz to 3GHz ■RF-R 50-1: H-Field Probe 30MHz to 3GHz ■RF-U 5-2: H-Field Probe 30MHz to 3GHz ■RF-B 3-2: H-Field Probe 30MHz to 3GHz ■SMB-BNC: 1m cable ■Case *For more details, please refer to the related links or feel free to contact us.

  • EMC countermeasure products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RF4-E Set (Electric Field Probe)

RF4-E Set (Electric Field Probe)

The corresponding frequency range is 30MHz to 1.5GHz/3GHz! PCB emission near-field probe type.

The "RF4-E Probe Set" includes two passive electric field probes that measure electric fields in the frequency range of 30MHz to 3GHz (1.5GHz) for comparative purposes. These probes are designed for analyzing electric field distribution, detecting coupling mechanisms on modules, and evaluating RF voltage in power systems at signal lead switching edges. Langer's near-field probes are compact and very easy to use, and they are electrically well-shielded due to the current-damping sheath. 【Set Contents】 ■RF-E 02: E-Field Probe 30MHz to 1.5GHz ■RF-E 05: E-Field Probe 30MHz to 3GHz ■SMB-BNC: 1m cable ■Case *For more details, please refer to the related links or feel free to contact us.

  • EMC countermeasure products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Probe

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.