We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Processed products.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Processed products×フジカ工業 - List of Manufacturers, Suppliers, Companies and Products

Processed products Product List

46～60 item / All 70 items

Displayed results
EPT rubber cushion cut-out product

EPT rubber cushion cut-out product

We made cushion rubber from the EPT sheets in stock. Rubber cushions and spacers can be mass-produced at low cost through die-cutting.

Ethylene propylene rubber is excellent in weather resistance, ozone resistance, and aging resistance, making it suitable for long-term use even under outdoor conditions. Since it is a commonly used rubber, we have materials in stock depending on the thickness. We can also discuss the number of lots, so please feel free to contact us.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Antistatic transparent PVC adhesive products

Antistatic transparent PVC adhesive products

Electrostatic discharge prevention materials can be processed in the same way as regular materials. Since PVC has good adhesive processing properties, it can be transformed into various processed products of different sizes.

This is PVC with an anti-static coating on the surface. The cutting surface loses its functionality due to being shaved off. We also handle other functional materials.

  • Other physicochemical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hemisal 15 Insulation Material Machined Products

Hemisal 15 Insulation Material Machined Products

Hemisal 15 is a non-asbestos rigid insulation material. It is inexpensive as insulation material and is often used for machining.

Hemisal 15 is a heat-insulating board made by Nichias, composed of a mixture of cement and glass fibers. It is a material with high mechanical strength, good dimensional stability, and processability. It is sometimes used as a cement board for electrical insulation.

  • Electric furnace

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Silicon 50° small lot water jet processed products

Silicon 50° small lot water jet processed products

We have sheets of silicone at 50° in stock, so we can accommodate small lots. For small lots, water jet processing that does not require a mold is effective.

This is a silicone rubber sheet cut with a water jet cutter. It accurately reproduces the shape of the drawing. Silicone rubber is particularly excellent in cold and heat resistance, with very little change in properties over a range of -60° to 250°. It complies with food sanitation laws, so it is used in food machinery and medical devices.

  • Granulating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PTFE round bar machining products

PTFE round bar machining products

We handle a lot of machining processes such as turning and machining of PTFE. Please feel free to leave the cutting process from round bars and pipes to us.

Fluororesin has excellent heat resistance and chemical resistance, and it is the material with the least wear among all substances. It also excels in non-stick properties and is used for coatings on frying pans. It is also widely used in the food and pharmaceutical industries.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super cork rubber blend cut-out product

Super cork rubber blend cut-out product

The super cork manufactured by Dainaga Co., Ltd. contains rubber. Due to the rubber blend, it can be processed like rubber while also possessing the sealing properties of cork.

Super cork has the characteristics of rubber that prevent damage from pressure due to tightening, along with high compression, impermeability, anti-slip, vibration absorption, insulation, and high elasticity. It is installed at joints where leakage is not allowed. Please feel free to consult us about gasket production as well.

  • Fuel system parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electrostatic discharge prevention acrylic cover parts sheet processing products

Electrostatic discharge prevention acrylic cover parts sheet processing products

This is a cover made of acrylic material with an anti-static function. Please feel free to leave any flat processed products, such as covers, to us.

This is a grade of general-purpose transparent acrylic that has been given antistatic properties. It has the same level of transparency and workability as standard products. We also accept processing of functional grades, so please feel free to consult with us.

  • Other electronic parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Urethane 90° thin-walled machined product

Urethane 90° thin-walled machined product

Urethane can be machined with tools like routers to create shapes. For thin materials, careful adjustments are made while gradually reducing the thickness.

This is a process where urethane rubber is poured into a mold and solidified, then machined using a lathe or router end mill. This is something like a veneer that has been shaved down to a thickness of 0.5mm. However, the thickness is the target. Urethane rubber is particularly excellent in abrasion resistance and weather resistance, has very strong tear resistance, and also possesses oil resistance, making it suitable for outdoor use and machine integration.

  • Powder Molding Machine

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electrostatic prevention PVC adhesive processed products

Electrostatic prevention PVC adhesive processed products

The anti-static effect of the cutting surface decreases, but it is possible for adhesive processing. Please feel free to consult us about adhesive processing, just like with regular transparent PVC.

This is PVC coated with an anti-static coating on the surface. To minimize the reduction of anti-static performance, efforts were made to keep the cutting surfaces as small as possible.

  • Granulating Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MC901 Machining Small Batches

MC901 Machining Small Batches

MC901 also widely accepts processing from small lot prototypes. Since machined products do not require molds, it is possible to refine the shape while conducting several rounds of prototyping.

We are using the MC901 made by MCAM. There is a standard for material thickness, and 20t is exactly within the standard thickness. The dimensions of the material for processing are made slightly larger, including the thickness.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Sponge demo case storage items

Sponge demo case storage items

We can handle everything from sponge processing to the layout of storage items. The contents are well protected even inside the demo case during transport.

B-4, which has a moderate soft feel, is often used in the production of interior products. It is lightweight, flexible, and does not allow water to pass through, similar to a pool kickboard. We will also reflect on layout and current improvement points in conjunction with production.

  • Cushioning material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MC Nylon milling processing warp prevention

MC Nylon milling processing warp prevention

The nylon was processed after being warped in the opposite direction as a warp prevention measure. The milling can be done on the entire surface, but caution is needed regarding warping when the area is large.

We handle MC nylon in blue from manufacturers such as Mitsubishi, Mitsuboshi, and Nack. Here, we have reinforced the screw holes by inserting an insert into the pilot hole. Care was taken in the manufacturing process to ensure that the three plates slide smoothly by aligning with the protrusions.

  • Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Neo Spo C-4305 cut-out product

Neo Spo C-4305 cut-out product

We have various thicknesses of Neo Sp C-4305 in stock. Among many options, C-4305 is a standard product that is widely used for cutting processing.

It is one of the common rubber sponges made from CR rubber that has been foamed. You can often find it as gap-filling cushions or tapes at home improvement stores. It also meets flame retardant standards.

  • Control Panel

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-asbestos joint sheet T1995 cut product

Non-asbestos joint sheet T1995 cut product

We will process the non-asbestos joint sheet T1995 made by Nichias. The joint sheet can be processed using a Thomson-type die cutting.

This is a non-asbestos joint sheet made by adding inorganic fillers to inorganic fibers and aramid fibers, with oil-resistant synthetic rubber blended as a binder. The T1995 produced by Nichias Corporation is a material that is easy to process. The recommended temperature range for use is -100°C to 150°C. We also accept water jet processing in various sizes and quantities.

  • Other physicochemical equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PC cap machined product

PC cap machined product

Polycarbonate, which has high impact resistance, is often subjected to machining. Items with many machined surfaces, such as caps, will remain cloudy unless polished.

Polycarbonate is the only transparent general-purpose engineering plastic. It also excels in weather resistance. By polishing the cut surface, transparency can be restored.

  • Other electronic parts

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Processed products

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.