Tipping Bucket Rain Gauge 'LD-110' [Rental]
It is a commonly used rain gauge. By detecting rainfall with a tipping bucket mechanism, it can record the amount of rain.
Sensor sensitivity: 0.5mm per pulse
- Company:ソーキ
- Price:Other
Last Updated: Aggregation Period:Sep 17, 2025~Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated: Aggregation Period:Sep 17, 2025~Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated: Aggregation Period:Sep 17, 2025~Oct 14, 2025
This ranking is based on the number of page views on our site.
16~30 item / All 30 items
It is a commonly used rain gauge. By detecting rainfall with a tipping bucket mechanism, it can record the amount of rain.
Sensor sensitivity: 0.5mm per pulse
It is a commonly used rain gauge. By detecting rainfall with a tipping bucket mechanism, it can record the amount of rainfall.
■Sensor sensitivity: 0.5mm per pulse ■Measurement range: 0 to 50mm (repeated tilting)
A tipping bucket rain gauge with a structure that is less affected by wind due to its constriction!
The "OW-34-BP" is a tipping bucket rain gauge composed of a body and a measuring section. The measuring section is housed within the body, which has a water intake with a diameter of 200mm. The tipping bucket tips over with the weight of 0.5 mm (standard) of precipitation, and a magnet attached to it switches the reed switch ON each time it tips. This converts the precipitation amount into contact signals for rain measurement. 【Features】 ■ The constriction in the center of the body makes it less susceptible to wind effects even in strong winds. ■ Can be installed in environments prone to affecting metal parts, such as volcanic areas, coastal areas, and various plants. ■ Designed to minimize issues caused by corrosion and other problems. *For more details, please download the PDF or feel free to contact us.
Energy-saving type that is 1/3 more efficient than conventional heater-equipped types, with improved capture rate! Patent obtained.
The tipping bucket rain gauge sensor is a sensor for measuring rainfall at intervals. It is equipped with a standard double funnel filter. The bucket tips for every 0.5mm or 1.0mm of rainfall entering the water inlet, and this tipping action is detected by a reed switch, which outputs a contact pulse signal. Compared to conventional heater-equipped types, this model is a 1/3 energy-saving type with improved capture rate. 【Features】 ■ Options available for only the upper heater with a single contact output without a heater. ■ Non-certified products can have heaters added later. *For more details, please contact us or download the PDF for more information.
The wireless digital rain gauge MI1WRG-211M is a system that can accurately measure and record rainfall over an extended period.
By incorporating a SIM card, you can view real-time rainfall data via the cloud as long as you are within the coverage area of the smartphone's signal.
Latest low-cost rain gauge using infrared light!!
It uses the same method as the rain sensors found in automobiles in recent years. There are no mechanical moving parts, and it can be finely adjusted from the beginning to the end of rainfall based on various sensitivity settings. Additionally, as a rain gauge, it has control outputs for devices related to rain and agricultural facilities, allowing for a wide range of applications such as opening and closing awnings for open stores and skylights in greenhouses. P.S.: We have started handling new products, including a high-precision rain gauge version and a rain sensor specialized version!
A cold rain gauge with a heater.
This is a notice from Rex Co., Ltd. regarding the "Tilt-type Self-recording Rain Gauge MODEL34-HT-P."
Convert the rainfall amount into a pulsed contact signal to observe the rainfall.
This is a rain gauge with a 200 mm water inlet that has changed its body from a conventional cylindrical shape to an hourglass-shaped cover, housing an inner container in an overturned box design.
The rainfall amount is converted into a pulsed contact signal for the observation of rainfall.
The OW-34-BP+OZ-20 is a tipping bucket rain gauge that features a 200 mm inlet and has changed its body shape from the conventional cylindrical type to an hourglass-shaped cover. It has a tipping bucket mechanism that houses the inner container. The sensing part consists of a triangular bucket that tips over with the weight of 0.5 mm (standard) of precipitation, and a magnet attached to this tipping bucket instantaneously closes a reed switch each time it tips, converting the rainfall into pulse-shaped contact signals for measurement. It is certified by the Japan Meteorological Agency. For more details, please contact us.
It is a commonly used rain gauge. It operates a pen based on signals sent from the sensor, allowing for the recording of changes in rainfall on a recording paper.
The tipping bucket rain gauge consists of a receiving section and a recording section of the self-recording electric counter. The receiving section is placed outdoors, while the recording section is installed indoors in the observation room, and both are connected by wires through a battery to operate.
Designed for harsh environmental conditions! Various innovations have been implemented to enhance durability!
The "GRC-01" is an easy-to-install rain gauge that can measure with a resolution of 0.2mm per pulse. The main body is made of resin, making it corrosion-resistant, and it has been treated for waterproofing and dust prevention. It can be easily mounted on temporary scaffolding pipes using a horizontal adjustment stand. By utilizing the WEB remote monitoring service, you can check rainfall from a distance, and it can also be combined with a separately sold robust rain gauge stand. 【Features】 ■ Prevents clogging with a carefully designed double filter ■ Prevents electrical failures with complete waterproof treatment ■ Easy horizontal adjustment with a dedicated stand ■ Can be easily attached to temporary scaffolding pipes used at construction sites ■ Automatic recording is possible when connected to a data logger with a pulse counter *For more details, please refer to the related links or feel free to contact us.
A tipping bucket rain gauge that can be installed in volcanic areas, coastal areas, and various types of plants!
The "34-HT-BP" is a tipping bucket rain gauge designed for cold regions, equipped with a built-in heater to prevent freezing. The tipping bucket tips over with the weight of 0.5 mm (standard) of precipitation, and a magnet attached to it switches the reed switch ON each time it tips. This converts the precipitation into a voltage-free contact signal for rain measurement. 【Features】 ■ Built-in heater at the top of the body to prevent freezing of the sensing part ■ Suitable for high-temperature and high-humidity environments ■ Can be installed in environments prone to affecting metal parts, such as volcanic areas, coastal areas, and various plants ■ Designed to minimize issues caused by corrosion and other problems *For more details, please download the PDF or feel free to contact us.
Tilted type rain gauge sensing unit! It has a layout that makes installation and maintenance inspections easy.
We would like to introduce the "rain gauge" that we handle. The double structure of the filter prevents observation errors caused by clogging. For cold regions, there are models equipped with heaters to prevent rainwater from freezing. Certification from the Japan Meteorological Agency is available. The outer cylinder and legs are made of highly durable stainless steel. 【Features】 ■ Double structure adopted in the "filter" ■ Improved maintenance ■ Freeze prevention measures implemented at the drainage outlet ■ Enhanced durability *For more details, please refer to the PDF materials or feel free to contact us.
We will convert the rainfall amount into a pulsed contact signal for rainfall observation. There are two types available: with and without Meteorological Agency certification.
***Features*** - The body is made of polycarbonate, and by incorporating a waist in the center, it reduces the impact of wind and improves the rain capture rate. - The tipping bucket rain gauge OW-34 for 0.5mm has obtained type certification from the Japan Meteorological Agency. - It allows for stable observation and measurement over a long period at a low cost.
This is a rain gauge equipped with a heater that wraps a ceramic film heater around the rain measurement section, designed for cold regions.
The signals sent from the sensor can operate the pen and record changes in rainfall on the recording paper.