Release Agent(frp) - List of Manufacturers, Suppliers, Companies and Products

Release agent rubber molding case: Successful continuous molding that is difficult with conventional release agents.

When conventional release agents do not work well in rubber molding, please try FluoroSurf/MoldFree. There are many successful cases of continuous molding.

"FluoroSurf / Mold Free" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. FluoroSurf, supplied as a coating liquid, can be applied with a brush or spray gun. If you prefer a convenient aerosol, please try Mold Free. By applying either product, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts outstanding durability, with a proven track record of continuous release for thousands of shots, and reapplication restores its performance. Additionally, FloroSurf, Mold Free MF-01, and MF-5095 do not leave any release agent on the workpiece, eliminating the need for cleaning after molding. *If you would like a sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aerosol-type fluorine-based high-performance release agent "Mold Free" free of regulated substances.

Please use this as an alternative to the discontinued fluorinated release agent! You will achieve even better release properties. No regulated substances used.

A high-performance release agent with proven results in various fields, the fluorine-based release agent "Fluorosurf" has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after air-drying at room temperature. Additionally, it can be used as a substitute for release agents that have been discontinued by other companies. Please note that this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please include "Sample Request" in your inquiry. (This offer is limited to corporate clients. It cannot be used for applications involving food or medical purposes.)

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance release agent "Continuous molding possible" "For resin and rubber" "Dry non-transfer"

Overwhelming continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in just 5 minutes after application. The film thickness is only a few nanometers, eliminating the need for cleaning of molded products. Sample available.

"FluoroSurf" and "Mold-Free" provide excellent non-stick release properties to metal surfaces when applied. Please try it if conventional release agents do not work. PFAS-regulated substances are not used. 【Features】 ■ The fluororesin film reacts with the mold material and adheres strongly, allowing for continuous release even when conventional release agents fail. ■ The film thickness is just a few nanometers, faithfully reproducing surface shapes at the nano and sub-micron level. ■ FluoroSurf can be applied with a brush or spray gun, while Mold-Free can be applied directly from an aerosol can. Application is completed in 10 minutes at room temperature, eliminating the need for external processing like baked fluororesin. ■ There is no accumulation of dirt on the mold, and no transfer to the workpiece, eliminating the need for cleaning processes. (Excluding Mold-Free MF-02S) ■ It is also effective in improving resin flow. ■ There is no transfer of release agent components, so cleaning of molded products is unnecessary. ■ It is non-flammable, thus not classified as a hazardous material under fire safety laws. Additionally, it has low odor. A water-based model is also available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding.

Company：フロロテクノロジー
Price：Other

Other molds

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluorine-based release agent that can be applied on-site: Fluorosurf FG-5093.

Please try this when regular release agents do not work well. It offers overwhelming continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. After application, a non-stick property is imparted to the mold surface within 5 minutes of air drying at room temperature. The adhesion of the molded resin to the mold is reduced, demonstrating excellent continuous release even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with a brush or spray gun, with a 10-minute air drying time at room temperature. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce flash. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance continuous release agent Fluorosurf CFRP molding introduction case study

Even difficult molding that cannot be released with regular release agents can be continuously released. On top of that, there is no need for cleaning as there is no transfer to the molded product!

"FloroSurf FG-5093" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in cases where conventional release agents fail to work. It has outstanding durability, with a proven track record of continuous release for thousands of shots, and reapplication using a brush or spray can restore its performance. 【Case Study in Thin CFRP Molding】 1. Background Introduction In the thin molding of carbon fiber, such as separators for fuel cells, conventional release agents caused cracking during demolding, resulting in only about one good product out of ten sheets, leading to the abandonment of mass production. 2. Implementation Results By using FloroSurf FG-5093, continuous molding of 1,000 shots became possible, leading to the decision for mass production. Additionally, there is no transfer to the molded products, eliminating the need for cleaning and significantly shortening the process. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent for preventing cracks in CFRP thin sheet molding, no cleaning of molded products required.

Demonstrates its true capabilities in thin material molding with overwhelming release properties. Easy to apply, can be applied on-site during molding, and dries at room temperature in just 5 minutes. Free of PFOA/PFOS. Non-flammable and safe.

The "FloroSurf FG-509X Series" is a release agent that forms a dry fluorine film on the surface of molds. By simply applying it with a spray gun in our manufacturing facility and allowing it to air dry at room temperature, a dry, non-stick surface is imparted to the mold. There is no need to outsource processing to specialized contractors. The film is extremely thin, allowing for excellent continuous release properties even for complex and precise shapes. Additionally, the release agent components do not transfer, so cleaning of the molded products is unnecessary. Please try it in cases where conventional release agents do not work well during CFRP molding. Furthermore, our products do not contain regulated substances such as PFOS or PFOA. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ Film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with a brush or spray gun, with air drying in just 10 minutes at room temperature. No need for external processing ■ No removal of the film is required during reapplication ■ Low odor and non-flammable. Not classified as an organic solvent, significantly reducing legal management items Applying it to the nozzle of extrusion molds can also reduce haze. *If you would like a free sample, please contact us.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case] Continuous operation by reducing the formation of flash in extrusion molding nozzles.

Apply to the mouthpiece on-site. Simply air dry at room temperature to reduce haze. Significant improvement in productivity.

【Issue】 - Currently, mold release occurs after 5-10 minutes of continuous operation. We would like to extend this to approximately 60 minutes if possible. 【Solution Example】 By applying 'FloroSurf FG-5093' to the nozzle, continuous molding for 120 minutes becomes possible! FloroSurf FG-5093 is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the molding resin to the surface is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Precision Molding Case】Successfully achieved continuous molding of shapes that are difficult with conventional release agents.

For cases where conventional release agents do not work well in molding precise surface shapes, please try Fluorosurf. There are numerous achievements in continuous molding.

"Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. By applying it, the adhesion of the surface molding resin is reduced, and a layer of fluorine compounds at the nanometer level exhibits excellent release properties even for complex and precise shapes. It demonstrates its effectiveness in cases where conventional release agents do not work well. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Additionally, since the release agent does not adhere to the workpiece, cleaning after molding is unnecessary. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dry release agent Fluorosurf FG-5093 silicone-free

A dry release film is formed on the surface of the mold. Release properties are improved, and cleaning of the molded product is unnecessary. It is non-flammable and safe, plus it can be easily applied. It does not contain silicone-based compounds.

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It does not contain silicone, ensuring that molded products remain clean and do not require washing. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, allowing for continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modifications ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mold surface treatment agent allows for continuous release. Easy application on-site.

Please try this when you have difficulty with resin molding. It demonstrates overwhelming continuous release properties. After application in the molding area, air dry for 2 minutes at room temperature.

The "Fluoro Surf FG-509X" is a surface treatment agent that allows for fluorine processing on the surface by applying it to resin-molded molds, enabling continuous release. It can be easily applied on-site using a brush, spray gun, or wiping. After application, it dries at room temperature in just 2 minutes. (This product does not contain any PFAS regulated substances such as PFOA, PFOS, or PFHxS.) * This surface treatment bonds to the mold surface, creating a durable release film that allows for continuous release. * It can also be applied to molds that have been conventionally fluorinated, further improving release properties. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * It is non-flammable and does not contain organic solvents, eliminating the need for explosion-proof equipment, quantity management, and environmental measurement as stipulated by fire and safety laws. A water-based model "FG-505W" is also available as a VOC countermeasure model. * There is no need to remove the residual film during reapplication; you can simply apply another layer. * It has good gas release properties, reduces gas staining, and improves flow. * If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-based release agent "high performance and continuous release possible" "dry non-transfer" "VOC countermeasure product"

Please try this when regular release agents do not work well. Outstanding continuous release properties. Application is easy; it can be applied on the molding site and dries at room temperature in just 5 minutes. Contains no regulated substances!

"FluoroSurf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on-site using a brush or spray gun. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * When the release performance decreases, reapplication will restore its effectiveness. * Applying it to the nozzle of extrusion molds can also reduce blushing. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the regulations stipulated by fire and safety laws. * The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dry high-performance release agent Fluorosurf silicone-free

A dry release film is formed on the surface of the mold. Release properties are significantly improved, and cleaning of the molded products is unnecessary. It is non-flammable and safe, and can be easily applied. Contains no silicone-based compounds.

"FloroSurf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, ensuring that it does not contaminate molded products, eliminating the need for cleaning. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work properly. It boasts exceptional durability, with proven performance for continuous release over thousands of shots, and reapplication using a brush or spray can restore its effectiveness. **Features** - Strongly adheres to mold materials, enabling continuous release. - The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. - Easily applied with brushes or spray guns, eliminating the need for outsourcing processing. - No need to remove the film during mold modifications. - No transfer of release agent components, eliminating the need for cleaning molded products. - Low odor and non-flammable, maintaining a good working environment. *If you would like a free sample, please include "Sample Request" in your inquiry.*

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-based release agent, excellent release properties, continuous release possible with a single application, free of regulated substances.

The Fluoro Surf FG-5095W is an environmentally friendly water-based release agent with excellent release properties. Please try it when conventional release agents do not work.

FloroSurf FG-5095W is a water-based fluorine release agent. It is ideal for VOC countermeasures and does not use any regulated substances such as PFOA, PFOS, or PFHxS. When applied to elastomer molds for resin molding using a brush or spray and allowed to dry at room temperature for about 10 minutes, it reduces the adhesion of the molding resin on the surface, demonstrating excellent release properties. The release component reacts and adheres to the mold surface, providing sustained release effects and enabling continuous release. It is particularly effective in situations where conventional release agents struggle to perform. The coating is at the nanometer level, allowing for accurate reproduction even on complex and precise surface shapes, resulting in less mold contamination and significantly reducing cleaning efforts.

Company：フロロテクノロジー
Price：10,000 yen-100,000 yen

Other polymer materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Release Agent Example] Cleaning of molded products is unnecessary, enabling continuous release.

FloroSurf FG-5093 forms a dry release film on the mold surface. Release properties are improved, and cleaning of the molded products is unnecessary.

"FloroSurf FG-5093" is a mold release agent that dissolves a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It has outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Additionally, the release agent components do not adhere to the molded products, eliminating the need for cleaning. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modifications ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

On-site construction fluorine-based release agent - No need to clean the work! FluoroSurf

Please try this when regular release agents do not work well. Outstanding continuous release properties. Easy to apply with a brush or spray. Dries at room temperature in 5 minutes after application.

The "Fluoro Surf FG-5093/5095 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molded resin to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, and dries at room temperature in 10 minutes. No need for external processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment Applying it to the extrusion molding nozzle can also reduce streaking. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release Agent(frp) - List of Manufacturers, Suppliers, Companies and Products

Release Agent Product List

Release agent rubber molding case: Successful continuous molding that is difficult with conventional release agents.

Aerosol-type fluorine-based high-performance release agent "Mold Free" free of regulated substances.

High-performance release agent "Continuous molding possible" "For resin and rubber" "Dry non-transfer"

Fluorine-based release agent that can be applied on-site: Fluorosurf FG-5093.

High-performance continuous release agent Fluorosurf CFRP molding introduction case study

Release agent for preventing cracks in CFRP thin sheet molding, no cleaning of molded products required.

[Case] Continuous operation by reducing the formation of flash in extrusion molding nozzles.

【Precision Molding Case】Successfully achieved continuous molding of shapes that are difficult with conventional release agents.

Dry release agent Fluorosurf FG-5093 silicone-free

Mold surface treatment agent allows for continuous release. Easy application on-site.

Water-based release agent "high performance and continuous release possible" "dry non-transfer" "VOC countermeasure product"

Dry high-performance release agent Fluorosurf silicone-free

Water-based release agent, excellent release properties, continuous release possible with a single application, free of regulated substances.

[Release Agent Example] Cleaning of molded products is unnecessary, enabling continuous release.

On-site construction fluorine-based release agent - No need to clean the work! FluoroSurf

Search Keywords Related to Release Agent