Removal work Product List and Ranking from 8 Manufacturers, Suppliers and Companies

Mold Removal Work Achievements Introduction: Certain Hospital

It kills mold spores inside the board! It can significantly delay the appearance of mold.

We would like to introduce our "Mold Sterilization Cleaning" service. Our system impregnates the ceiling boards with a chemical solution, allowing for sterilization and cleaning of mold even within the board itself. Not only does it have a low odor and excellent finish, but it can also significantly delay the reappearance of mold on the surface compared to painting and cleaning. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Introduction of Mold Removal Work Achievements] Certain Cosmetics Factory Attic

Introducing a case of mold removal work in the ceiling of a certain cosmetics factory in Saga Prefecture!

At Apia Co., Ltd., we perform low-odor, mold sterilization cleaning. We impregnate the ceiling boards with chemicals to sterilize and clean the mold inside the boards. Not only is there minimal odor and a good finish, but it also significantly delays the reappearance of mold on the surface compared to painting and cleaning. The dilution ratio of the chemicals is determined based on the progress of the mold and the number of years, and the chemicals are applied using a dedicated mop, brush, or specialized sprayer. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other cleaning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Introduction of Mold Removal Work Achievements] Certain Hospital Ceiling Boards Around Air Conditioning

The ceiling board is impregnated with chemicals to disinfect and clean even the mold inside the board!

We would like to introduce a case of mold removal work carried out on the ceiling boards around the air conditioning at a certain hospital in Nara Prefecture. Our original mold removal agent has a low odor, allowing for safe completion of the work even in hospitals. Not only does it have a minimal smell and a good finish, but it can also significantly delay the reappearance of mold on surfaces compared to painting and cleaning. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other cleaning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Introduction of Mold Removal Work Achievements] Certain Supermarket Ceiling Gyptone

Remove only the dirt through a chemical reaction of the detergent, without damaging the body!

We would like to introduce a case of mold removal work carried out on ceiling gypsum board at a certain supermarket in Aichi Prefecture. The main reason why commercially available mold removers cannot kill mold is that they cannot break down the partition, preventing the detergent (disinfecting component) from reaching the mold spores. With our original special chemicals, the area was thoroughly cleaned. Our system allows the chemicals to penetrate the ceiling board, disinfecting and cleaning the mold inside the board. 【Main Components of Mold Removal Agent】 ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other cleaning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Introduction of Mold Removal Work Results] Certain Supermarket Ceiling Gyptone <Aichi Prefecture>

The protein-decomposing component dissolves the partition, and the sterilizing component breaks down the bacterial nuclei!

We would like to introduce a case of mold removal work conducted on ceiling gypsum board at a certain supermarket in Aichi Prefecture. Our system sterilizes even the mold spores inside the board, significantly delaying the visibility of mold. The mold had spread throughout the ceiling, but after the work, it became remarkably beautiful. 【Main Components of the Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other cleaning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Food Processing Factory Painted Wall Surface

Introducing a case study of mold removal work on painted walls at a certain food processing factory in Tottori Prefecture!

At Apia Co., Ltd., we perform low-odor, mold sterilization cleaning. Not only is it low in odor and provides a good finish, but it can also significantly delay the reappearance of mold on surfaces compared to painting and cleaning. We determine the dilution ratio of the chemicals based on the progress of the mold and the number of years, and apply the chemicals using a dedicated mop, brush, or specialized sprayer. You can trust us to handle even the strong mold that has proliferated in your factory. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other cleaning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Asbestos-containing finishing material removal work "Smart Recovery System"

Introducing a system that can solve problems related to the removal of asbestos-containing finishing materials!

The "Smart Recovery System" is a solution for the removal of asbestos-containing finishing materials, addressing issues such as preventing the splashing of cleaning water and managing the waste generated from peeling and cleaning wastewater. This system is implemented in conjunction with a high-pressure water washing method equipped with a dust collection device, using techniques suitable for corners and edges. It collects contaminated water from high-pressure washing without splashing or leaking it outside. The collected contaminated water is then coagulated and filtered to ensure safety before being discharged. 【Features】 ■ Solves issues such as preventing the splashing of cleaning water and managing waste from peeling and cleaning wastewater ■ Used in conjunction with a high-pressure water washing method equipped with a dust collection device ■ Implemented using methods suitable for corners and edges ■ Collects contaminated water without splashing or leaking it outside ■ Discharges the collected contaminated water only after ensuring safety ★ For those interested in the basic knowledge document "About the Removal of Asbestos-Containing Finishing Materials," please contact us. ★ *For more details, please refer to the PDF document or feel free to contact us.*

Company：アシレ
Price：Other

others
High pressure cleaner

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Preventing scattering while removing asbestos! "Water Clean Method"

[For those struggling with asbestos removal] Since it can be carried out with level 3 equivalent containment, "isolation containment" is not necessary! It only uses water, so it does not pollute the environment.

Our company provides a comprehensive service for asbestos removal work, from "pre-investigation and analysis of asbestos to construction," selecting the appropriate method for each site through detailed stratified analysis. The "Water Clean Method" generates ultra-high-pressure water ranging from 100MPA to 245MPA using a water jet pump, and employs a special simultaneous suction attachment to perform 【wetting】【spraying】【stripping】【suction】 simultaneously, making it an environmentally friendly technology that removes asbestos-containing finishing (exterior wall) coatings while preventing dispersion. In asbestos removal work, the equipment and systems are compact and simplified, allowing for a wider construction area and contributing to cost reduction. 【Features】 ■ Comprehensive support from pre-investigation of asbestos to construction ■ Uses only water, thus not contaminating the environment ■ Simultaneously powerfully sucks up wastewater and stripping materials, allowing for construction while preventing dispersion ■ Wet method suppresses dust ■ Capable of removing a wide range of coatings, including soft, elastic, and hard films ■ Efficiently removes inorganic substrate adjustment materials that cannot be removed with stripping agents *For more details, please refer to the related link page or feel free to contact us.

Company：マルホウ本社
Price：Other

Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Maruhou Exterior Wall Asbestos Removal

We will remove asbestos-containing exterior wall coatings, films, paints, and substrate adjustment materials using Maruhou's uniquely developed patented Water Clean method.

At Maruhou, we solve exterior wall asbestos removal work using the water clean method. We generate ultra-high pressure water from 100MPa to 245MPa with a water jet pump, and with a special simultaneous suction attachment, we can perform wetting, spraying, peeling, and suction simultaneously, effectively removing asbestos-containing materials (such as finishing materials and substrate adjustment materials) while strongly sucking them away. 【Features】 ■ Uses only water, so it does not pollute the environment ■ Simultaneously powerfully sucks up wastewater and peeling materials, allowing for construction while preventing scattering ■ Wet method suppresses dust ■ Capable of removing a wide range of coatings, including soft, elastic, and hard films ■ Efficiently removes inorganic substrate adjustment materials that cannot be removed with peeling agents ■ Complies with Level 3 standards *For more details, please refer to the related link page or feel free to contact us.

Company：マルホウ本社
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mold Removal and Prevention Work

Consistent mold prevention measures! Mold removal and prevention work that includes measurement and analysis of mold spores.

Kyosei Air Tech Co., Ltd. is responsible for the removal and prevention of mold. For "mold removal work," we use a safe agent for the human body, "Propa Stop E Type," which is recommended for areas such as under floors and substrates. For "mold prevention work," we use agents suitable for the specific areas being treated. In areas where moisture or condensation is expected, we use "Propa Stop O Type," and for other areas, we use "Propa Stop C Type," among others. 【Features】 ■ Comprehensive mold countermeasures ■ Responsible execution of mold removal, mold prevention, and mold surveys (species and quantity) ■ Use of mold removal agents that are safe for the human body ■ Measurement and analysis of mold bacteria as part of mold countermeasures ■ Implementation of mold prevention coatings to prevent recurrence For more details, please refer to our catalog or feel free to contact us.

Company：共生エアテクノ
Price：Other

Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Asbestos removal work (NS Clean Method)

Clean, short construction period, low vibration! We propose solutions tailored to the site, such as using a stripping agent for exterior wall finishing.

Our company has obtained the Japan Architecture Center certified technical review certificate for the "NS Clean Method (Removal Method)" as a spray asbestos removal method for buildings, aimed at preventing the dispersion of asbestos. In addition to asbestos removal work, we also conduct preliminary written and visual inspections, as well as sample collection and analysis, all in a one-stop manner. By combining ultra-high-pressure water jet methods, we strive to further prevent the dispersion of asbestos to the surrounding area. 【Features】 ■ NS Clean Method - By ensuring that the number of asbestos fibers in the air of the work area is approximately 10 fibers/1 liter or less after the removal work and upon completion, we suppress contamination. ■ Water Jet Method (WJ Method) - Clean, short construction period, complete stripping, low vibration - It is possible to safely and quickly remove asbestos from inside chimneys. *For more details, please refer to the related links or feel free to contact us.

Company：エヌエス環境営業本部
Price：Other

Other services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Building, Inside Humidifier

By applying ARA to the mold, the protein-decomposing components dissolve the partition and completely sterilize it!

Our system impregnates the ceiling boards with a chemical that disinfects and cleans even the mold inside the boards. It has a low odor and provides a good finish, and it can significantly delay the reappearance of mold on the surface compared to painting and cleaning. Since we use a chemical that only reacts to mold, there is a high possibility that dirt that is not mold, such as dust or soot, will not be cleaned. [Main Components of the Mold Removal Agent] ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements Introduction] Inside a Certain Factory, Ceiling and Wall

A sanitation management maintenance method that enables the removal of dirt and the extermination of bacteria in areas where bacterial control is necessary!

We would like to introduce a case of mold removal work on the ceiling and wall surfaces at a certain factory in Gifu Prefecture. Mold that had adhered to the ceiling and walls was removed. It took three days to completely eliminate the stains. Our system impregnates the ceiling boards with a chemical solution that disinfects and cleans even the mold inside the boards. 【Main Components of the Mold Removal Agent】 ■ Sodium hypochlorite (4%) ■ Sodium carbonate ■ Surfactant (non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other cleaning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mold Removal Work Achievements Introduction: Certain Hospital Ceiling

Introducing a case of ceiling mold removal work at a certain hospital in Osaka Prefecture!

At Apia Co., Ltd., we impregnate ceiling boards with chemicals to disinfect and clean even the mold inside the boards. We also thoroughly remove mold from the felt-like fabric of air conditioning vents. The dilution ratio of the chemicals is determined based on the extent of mold progression and the number of years, and the chemicals are applied using a specialized mop, brush, or spray device. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other cleaning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Mold Removal Work Achievements] Certain Supermarket Ceiling <Gifu Prefecture>

Mold removal work on the ceiling at a certain supermarket in Gifu Prefecture! A clean finish with no stains left behind.

At Apia Co., Ltd., we conduct low-odor, mold sterilization cleaning. We impregnate the ceiling boards with chemicals to sterilize and clean the mold inside the boards. Not only is the odor minimal and the finish excellent, but it also significantly delays the reappearance of mold on the surface compared to painting and cleaning. Since we use very safe chemicals compared to sodium hypochlorite and paint, there is little odor, and it does not affect the opening of your business. 【Main Components of Mold Removal Agent】 ■ Sodium Hypochlorite (4%) ■ Sodium Carbonate ■ Surfactant (Non-ionic) *For more details, please download the PDF or feel free to contact us.

Company：アピア
Price：Other

Other cleaning tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Removal work Product List and Ranking from 8 Manufacturers, Suppliers and Companies

Removal work Manufacturer, Suppliers and Company Rankings

Removal work Product ranking