Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
16～30 item / All 48 items
I will demonstrate exceptional power.
It is a flexible chute with a urethane joint reinforced with strong polyester fabric. ◎ The outer circumference is reinforced with a strong "polyester fabric." ◎ It is used in various processes such as resin, powder milling, and nickel powder.
It adsorbs magnetic materials from the raw materials that pass through the chute. Due to its compact design, it can be easily installed in existing equipment!
<Equipment Overview> It is installed in the middle of the chute and adsorbs magnetic materials from the passing raw materials. Maximum surface magnetic force: 0.15T (1500 Gauss) <Features> - Since it uses permanent magnets, there are no running costs. - It is compact, making it easy to install in existing equipment. - It needs to be removed regularly to remove the adsorbed materials. *For more details, please download the materials or feel free to contact us.
![[Precision Cutting Processing Example] Polycarbonate Shoot](https://image.mono.ipros.com/public/product/image/71b/2000763795/IPROS88932270393686528151.png?w=280&h=280)
Using polycarbonate with high strength and heat resistance! It is possible to significantly reduce costs!
Here is an introduction to examples of processing polycarbonate (PC) shoots. These are used in the supply section of parts feeders, requiring strength to withstand fine vibrations. Additionally, since this parts feeder has a built-in heater to raise the temperature, polycarbonate (PC) with high strength and heat resistance is used. Moreover, since this product is for small lots, it is more cost-effective to manufacture through cutting processes rather than creating molds and performing molding. Our company can perform cutting processes for such complex curved shapes and narrow long hole machining within a tolerance of ±0.05, provided we receive drawings or CAD data. 【Case Overview】 ■ Name: Polycarbonate Shoot ■ Material: Polycarbonate (PC) ■ Dimensions: 150mm × 90mm Height 10mm ■ Accuracy: ±0.05mm ■ Features: Complex curved shape, long hole machining *For more details, please refer to the related link page or feel free to contact us.
![[Precision Cutting Processing Example] MC Nylon Cutting Chute](https://image.mono.ipros.com/public/product/image/262/2001114509/IPROS79607912197828889863.png?w=280&h=280)
Introducing a chute made from heat-resistant MC nylon, processed through cutting, for bearing component inspection machines!
We would like to introduce a case study of precision machining of "MC Nylon Cutting Shoots" conducted by our company. Due to the requirements for impact resistance, high wear resistance, and sliding properties, as well as the need for heat resistance because it operates at temperatures of 130 to 140 degrees, we used heat-resistant MC Nylon MC602ST. Additionally, the groove part of the shoot is designed with a gradually changing fillet through three-dimensional machining to ensure that the products flow smoothly without stagnation from the upper part to the lower part. 【Case Overview】 ■ Name: MC Nylon Cutting Shoot ■ Material: Heat-resistant MC Nylon ■ Dimensions: 210mm × 140mm × t60 ■ Precision: ±0.03 ■ Features: Groove machining with gradually changing fillet through three-dimensional processing *For more details, please refer to the related links or feel free to contact us.
You can choose materials based on purpose and use! Introducing products used for connection parts of various plants.
This product line is used for connection points in various plants, piping equipment, and machinery. It is used for the transportation of various fluids and for absorbing vibrations and displacements. The materials are selected from various sheets and canvas fabrics according to the purpose and application, and the combination of different materials and the number of layers (plies) are determined based on the requirements. [Features] ■ Materials are selected from various sheets according to the purpose and application. ■ Made to order, allowing for design and production from the design stage. *For more details, please refer to the PDF document or feel free to contact us.
We will manufacture parts based on the drawings from the customer!
We manufacture parts based on drawings provided by our customers, including part layout, cutting, bending, welding, and inspection. This is part of a piping system through which small granular materials flow. *For more details, please feel free to contact us. 【Unique Points of Our Company】 ■ Capable of handling projects with short delivery times ■ Able to manufacture parts with complex shapes ■ Protective tape is applied during part manufacturing to prevent scratches ■ Special diameter (non-standard) pipes can also be bent and manufactured from sheets
Solve that problem that haunts the shot!
The "Anti-adhesion chute" is a device made of flexible materials for the inner tube, which is the transport route for powder. It vibrates in a pulsed manner using air pressure, allowing the powder to pass through without leaving any residue inside. Accurate weighing and precise supply of powdered raw materials can be affected if they adhere to the chute when being fed into the next process. Furthermore, if the adhesion grows and falls off, it can lead to abnormal bulk feeding and blockages caused by the adhesion. This device can minimize adhesion within the chute to the utmost limit, preventing such troubles before they occur. 【Features】 ■ The inner tube, which is the transport route for powder, is made of flexible materials. ■ It vibrates in a pulsed manner using air pressure, allowing the powder to pass through without leaving any residue inside. ■ Prevents troubles before they occur. ■ Patent No. 2843882 *For more details, please refer to the PDF document or feel free to contact us.
Introducing the parachute bundle with launcher that enables reliable and rapid parachute deployment!
The "Skycat Launcher Equipped Gunpowder-Free Parachute Bundle" is a product designed for aircraft weights ranging from 2.5 kg to 20 kg. With FUSE(R) technology, it enables reliable and rapid parachute deployment. The parachute is ejected with bullet-like force, preventing the parachute and parachute rigging from entangling with the aircraft or propellers. This bundle product includes everything: parachute, parachute launcher, harnesses, and more. Please feel free to contact us if you need assistance. 【Features】 - Lightweight, compact, and highly efficient parachute reduces impact during emergency landings - Has minimal impact on the aircraft's battery consumption and flight time - Ejects the parachute with bullet-like force - Prevents the parachute and parachute rigging from entangling with the aircraft or propellers - Safe for transport as it does not use CO2 cartridges or gunpowder *For more details, please refer to the PDF document or feel free to contact us.
【Wear Resistance, Slipperiness, Corrosion Resistance】 Achieving both wear resistance and slipperiness - Blastron for product input chutes.
At the sugar manufacturing plant, sugar was adhering to the chute for loading into paper bags. Even with a fluororesin coating, it lacked durability and was problematic. Issues: 1. Compliance with food sanitation laws is essential. 2. The highly adhesive sugar should slide off as easily as with a fluororesin coating.
![Stainless Steel Discharge Chute for Container Inversion (Flat Type) [HTL-F]](https://image.mono.ipros.com/public/product/image/f27/87799023/IPROS7583764988555892994.jpg?w=280&h=280)
No accumulation of contents, dirt, or cleaning solution! A discharge chute that works great when using the inverted lifter! Custom-made to suit your needs!
By setting it in our stainless steel tank (ST/CTL) and inverting the container, the contents of the powder can be discharged (or input) into equipment such as grinders. The connection parts are flat to prevent powder accumulation, ensuring that even expensive powders are not wasted. Additionally, the included PTFE gasket does not tear, preventing contamination of the contents. The chute is made of stainless steel, making it resistant to rust, and the gaps in the rolled edge are welded all around to prevent dirt and cleaning liquids from accumulating, making it very hygienic. It can also be used as a discharge chute when using an inversion lifter. Its thin and lightweight design makes it easy to handle. Specifications can be changed according to the application.
Discharge hopper for sanitary tanks that can also be set on standard tanks!
The "HTL-F" is equipped with a discharge chute set on a sanitary tank, which allows for the inversion and discharge of powder. A special Teflon packing is placed between the tank body and the discharge chute, secured with a dedicated band. This structure prevents powder accumulation. It is a discharge hopper for sanitary tanks, but it can also be set up for standard tanks. Please contact us if you are interested. 【Selected Specifications (Excerpt)】 ■ Tank Inner Diameter: 387mm / 430mm / 470mm / 565mm ■ Material: SUS304 / SUS316L ■ Taper Angle: 60 degrees / 90 degrees / 120 degrees ■ Finish - Internal and external buff polishing equivalent to #320 - Internal electrolytic polishing and external buff polishing equivalent to #320 *For more details, please refer to the PDF document or feel free to contact us.
It is a chute with rubber attachment, designed for impact resistance and to prevent wear from powder and soil.
By adhering ceramic sheet materials to areas of equipment and devices that experience severe wear, such as those used for storing and transporting raw materials like iron ore, coal, and soil, we protect the base material from wear. Ceramics are highly anticipated due to their excellent properties (mechanical, electrical, thermal, etc.) and are now widely used in many industries. However, unlike metals, they cannot be bent or stretched due to their processing methods. This difficulty in processing sometimes leads to abandoning their use. Additionally, since ceramics are molded products, using standardized products (applications) is essential for cost performance. Therefore, commonly used tile chips are available. The ceramic sheet, which consists of 10×10×3t square tiles adhered with adhesive, can overcome the difficulty of processing and has a wide range of applications, allowing us to meet diverse customer needs.
Countermeasures for blockages in the material supply chute of injection molding machines! The problem is resolved in one go, and we have been introduced to it.
This is an introduction to an example of measures taken to address clogging in the material supply chute of an injection molding machine. We received a request to lend a Brody Disk Mini, which was installed and tested by the customer. The issue was resolved in one attempt, and they have since adopted it. In addition to lending products, our company also provides advice on layout and control. Please feel free to consult with us. 【Overview】 ■ Chute dimensions: Φ150→Φ80 ■ Material: Wax + metal powder (tends to form clumps when squeezed by hand) ■ Trouble situation: - No issues when the supply amount is low - Once a clog occurs due to increased supply, it does not improve 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability, as well as the risk of foreign material contamination. The silicone disk of this equipment is exceptionally strong and durable. You will understand this once you use it! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF document or feel free to contact us.
I will turn inspiration into form.
Would you like to turn your "inspiration" into "form"? Why not customize the equipment and tools you currently have to suit your needs? The professional team of "Magono Te Dot Com" will solve it for you.
Welding of the inner corner of the separation chute of food machinery is also possible with YAG robot welding! Here are some examples.
Our company delivers stable products, focusing on YAG laser welding robots and TIG welding robots. In particular, YAG laser welding has achieved high-quality and beautiful welds by minimizing distortion through the possession of high-output transmitters. The "Powder Diverging Chute" is a food machinery component that allows powder products to diverge in two directions after being transported on a conveyor. [Features and Examples (Photos)] ■ The inner corner welding of separation chutes for food machinery can also be done with YAG robot welding. ■ By performing laser welding, we were able to minimize the weld bead to the limit, allowing powder products to flow smoothly without accumulating on the weld bead, and preventing powder products from entering gaps due to the welding. *For more details, please refer to the PDF materials or feel free to contact us.
