Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
3316～3330 item / All 3658 items
ORing Gigabit Ethernet Switch BIDI Compatible SFP Module
It is an ORing-made Ethernet switch with BIDI support and a 1Gbps SFP optical transceiver.
ORing 16-Port Managed PoE Ethernet Switch for Railways
Features ● 12 ports of 10/100Base-T(X) PoE (P.S.E.) and 4 ports of 10/100/1000Base-T(X) ● PoE ports compliant with IEEE 802.3af/at (up to 15.4/30W per port) ● Supports the latest IPV6 Internet Protocol version ● Automatic prevention of DOS/DDOS attacks ● IP-54 compliant waterproof design ● Wall mountable
SF39BA
Waterproof panel installation 5-key navigation touch button switch module, with LED backlight and metal housing for vandalism prevention. Laser engraved.
Optical fiber aggregation management switch for building fiber networks compatible with 10G uplink.
The "FOS-5112 Series" is a fiber aggregation switch designed for building fiber networks, equipped with a rich set of Layer 2 switch features. It has 12 SFP slots, and the uplink also supports SFP+. By combining our high-quality and affordable SFP transceivers from our lineup, it is possible to significantly reduce the cost of building fiber networks. We also offer SFP/SFP+ transceivers, so please feel free to contact us if you are interested. 【Features】 ■ Loop detection ■ Power failure notification ■ Dual image Protects against system crashes due to firmware upgrade failures. ■ SFP transceiver status monitoring ■ IPv4/IPv6 dual stack ■ Fanless design Achieves reduced power consumption and quiet operation through a fanless design. ■ Power redundancy *For more details, please refer to the PDF document or feel free to contact us.
This is a stainless steel level switch that can accommodate lengths of over 4000mm due to an intermediate joint. Proven performance (such as 8000mm).
When installing the level switch, if the height of the ceiling above the main body is lower than its length, it can be smoothly installed by using a split design. This can reduce transportation costs for long-type level switches during exports and other situations. The split position and number of splits can be freely configured. The mounting flange is compatible with JIS, JPI, and ANSI standards. The contact capacity is standard at 50VA and high capacity at 110VA. The number of contacts ranges from 1 to 5 points (more than 5 points can be discussed). The guaranteed operating temperature is -30 to 125°C, while the operational temperature range is -60 to 200°C. The float diameters are φ40, φ50, and φ60. There is a lineup of drip-proof, waterproof, and pressure-resistant explosion-proof types (d2g4). There are also sanitary rule specifications (1.5S to 5S) available. The position and number of intermediate joints can be set according to specifications. For more details, please refer to the catalog and consult us. Materials used include SUS304, 316, and 316L.
It can accommodate lengths of over 4000mm with an intermediate joint. This is a stainless steel float level switch with a movable flange position.
When installing the level switch, if the height of the ceiling above the main body is lower than its length, it can be smoothly installed by using a split design. This can reduce transportation costs for long-type level switches during export and other situations. The split position and number of splits can be freely set. The mounting flange is compatible with JIS, JPI, and ANSI standards. The contact capacity is standard at 50 VA and high capacity at 110 VA. The number of contacts ranges from 1 to 5 points (more than 5 points can be discussed). The float outer diameters are φ40, φ50, and φ60. The guaranteed operating temperature is -30 to 125°C, while the operational temperature range is -60 to 200°C. There are models available that are drip-proof, waterproof, and pressure-resistant explosion-proof (d2g4). There are also sanitary rule specifications (1.5S to 5S) available. The position and number of intermediate joints can be set according to specifications. For more details, please refer to the catalog and consult us. Materials used: SUS 304, 316, 316L.
This is a PVC level switch with a movable flange position.
The mounting flange complies with JIS standards. The contact capacity is standard at 50 VA and high capacity at 110 VA. The number of contacts ranges from 1 to 5 (more than 5 can be discussed). For measuring liquids such as acids. Measurable specific gravity (0.75 to). Float outer diameter φ48. Temperature up to -50°C. Available in drip-proof, waterproof, and pressure-resistant explosion-proof types (d2g4). For more details, please refer to the catalog and consult with us.
Response switch that can be used for the examiner's stimulus onset instructions and for measuring the subject's responses.
We offer a variety of switches that can be connected to Multi Trigger Systems and trigger devices for reaction measurement. Additionally, by combining them with our product "4-Channel Switch Box [MB-SW]," output at TTL levels is also possible. In addition to our standard lineup, we can manufacture custom switches tailored to the devices and environments you need to connect. If you have a specific switch requirement, please feel free to contact us.
Response switch that can be used for the examiner's stimulus onset instructions and for measuring the subject's reactions.
We offer a variety of switches that can be connected to Multi Trigger Systems and trigger devices for reaction measurement. Additionally, by combining them with our product "4-Channel Switch Box [MB-SW]," output at TTL levels is also possible. In addition to our standard lineup, we can custom-manufacture switches tailored to the devices and environments you need to connect. If you have a specific switch requirement, please feel free to contact us.
Over 99% high reflectivity! The mirror surface has a hardness almost equivalent to glass, making it easier to handle compared to metal mirrors.
This product is a broadband total reflection mirror that has been deposited on a flat substrate using ion-assisted film deposition technology, featuring two types of oxide dielectric alternating multilayers with different refractive indices. It offers a high reflectivity of over 99% across a wide wavelength range of 400 to 1200 nm or 600 to 1700 nm. With a high reflectivity of over 99%, the mirror surface has a hardness comparable to that of glass, making it easier to handle compared to metal mirrors. 【Features】 - Usable incident angles range from 0 to 50° - High reflectivity for both P-polarized and S-polarized light - Minimal aging changes - Usable in high temperature and high humidity environments - Almost no absorption loss, with high endurance against CW lasers *For more details, please refer to the PDF document or feel free to contact us.
Isn't it true that even large-looking switches don't respond unless you press the center? The big switch responds across the entire surface! It can also be operated with work gloves or rubber gloves.
Our company has developed the 'Deka! Switch', a membrane sheet switch series with an outer diameter of 45mm. (Please consult us if you require specifications exceeding 45mm.) It can be used in conjunction with standard membrane switches and is capable of incorporating LED backlighting. It excels in heat resistance, waterproofing, and durability, making it suitable for applications that require environmental performance. The switch features a wide reaction area that facilitates operation with work gloves or rubber gloves, making it ideal for operating FA equipment. We can accommodate your desired design from prototype to mass production according to your applications and purposes. 【Features】 - Sheet-type circuit and film laminated structure design - Ultra-thin, around 1mm - Click feel equivalent to tactile switches - LED incorporation for backlighting possible - Dedicated push unit can accommodate up to 45mm *For more details, please refer to the PDF document or feel free to contact us.
A click feel similar to that of a metal dome specification product (pressing sensation). Its simple structure eliminates the need for sorting during disposal.
This product is a PET film laminated sheet switch that achieves a clear click feel even with a low stroke of about 0.2mm, thanks to the technical expertise of Marusan Name. It is designed with a strong awareness of switches using metal domes, successfully reproducing their distinct click feel (tactile feedback). Since it does not use metal domes, it also eliminates the need for sorting during disposal. 【Features】 ■ Clear click feel even with an extremely low stroke (about 0.2mm) ■ Simple structure with the surface sheet and electrode substrate integrated ■ Capable of supporting backlighting with built-in LEDs ■ Flat, ultra-thin type switches can also be created ■ In addition to standalone sheet switches, it can also be adhered to any substrate *For more details, please refer to the catalog available for download in PDF format. Feel free to contact us with any inquiries.
Reset Switch SU-1
■Features ● Used for calling the living safety system, resetting sensors, and resetting the toilet usage notification system ● Pressing the button outputs a c contact (with recovery/RESET indication) ● Compatible with single switch BOX
Matt switch 480×800mm DMS-488
Features ●Outer material: Special rubber ●Operating pressure: 200N/100cm² ●2-core lead ●Detection output: a contact AC/DC 30V 0.3A or less ●Lead wire 50cm included ●Waterproof type ●Installation location: Indoor and semi-outdoor (places not directly exposed to rain)
The controller unit is miniaturized. The wire can be cut freely, and installation is easy with connector wiring.
■Two Power Sources for Different Uses You can choose between two types of power sources, 100V and 200V, depending on the installation conditions of the electric shutter. It is compatible with all types of electric shutters using a near-infrared 1-beam opposing type. ■Connection Cables Can Be Cut Freely Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables cut freely. Additionally, the connection cables are joined by connectors, making wiring easier. ■Response Speed Switching Function In addition to normal real-time operation, it is also possible to switch to an on-delay timer operation (a function that prevents light-blocking operation by the edge of the electric shutter). ■Slim Sensor Head Can Be Installed with One Touch The sensor head for 10m detection adopts a one-touch installation type that can be installed simply by drilling a hole and pushing it in, improving workability. ■Built-in Sensitivity Volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-Friendly Design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Equipped with an operation indicator light that is convenient for operation confirmation (Red LED: Always on, turns off when detecting)
