We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Testing Machine.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Testing Machine×ユアサシステム機器 - List of Manufacturers, Suppliers, Companies and Products

Testing Machine Product List

1～15 item / All 28 items

Displayed results
Non-tension bending durability testing machine for flexible wearable devices

Non-tension bending durability testing machine for flexible wearable devices

Removable cartridge! It can accommodate simultaneous testing and various sample sizes.

The "DR11MR4-CS Series" is a tabletop durability testing machine with a removable cartridge for easy sample installation. It features a double-joint clam shell design that holds the sample between two plates, allowing for bending tests with an extremely small bending radius without applying tensile load. It enables simultaneous testing of multiple samples and testing of large samples. 【Features】 - Removable cartridge - Double-joint clam shell design that does not apply tensile load - Supports simultaneous testing and various sample sizes - Focus on the deformation process of the sample shape during bending - Holds the sample between two plates *For more details, please refer to the PDF materials or feel free to contact us. *An English version of the catalog is also available for download.

  • Testing Equipment and Devices
  • Strength Testing Equipment
  • Weather resistance test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bending" tabletop durability testing machine "DMLHB-P150 series

Bending" tabletop durability testing machine "DMLHB-P150 series

The bending angle can be set arbitrarily! A tabletop durability testing machine capable of bending tests up to a maximum of ±180°.

The "DMLHB-P150 Series" is a tabletop durability testing machine that easily enables bending durability tests for cables, harnesses, bare wires, and fine wires. It is also capable of testing strip-shaped samples up to 30mm in width. Starting with bending tests for cables using weights that comply with JIS standards, it features a clamp effective length of 30mm, making it suitable for strip-shaped test samples such as FFC and FPC. 【Features】 ■ Attachments that realize bending tests ■ Various bending tests compliant with JIS standards are possible ■ Bending angles can be set arbitrarily, allowing for bends of up to ±180° ■ Bending radii can be manufactured in the range of φ5 to 80mm (standard accessory: φ20mm) ■ Bending can also be performed at the connector connection point without using a bending radius ■ CE marking compliant product *For more details, please refer to the PDF materials or feel free to contact us. *An English version of the catalog is also available for download.

  • Testing Equipment and Devices
  • Strength Testing Equipment
  • Weather resistance test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Twisting tabletop durability testing machine 'DMLHB-TW series'

Twisting tabletop durability testing machine 'DMLHB-TW series'

Twisting tests for samples up to φ10mm are possible! Twisting tests can also be conducted for 10 turns in both directions.

The "DMLHB-TW Series" is a tabletop durability testing machine that enables twisting durability tests for linear samples such as cables and fibers. It allows twisting tests for cables and other materials in accordance with JIS standards, achieving a wide range twisting test with a maximum reciprocating angle of ±270°. Additionally, when using the DMLHPR durability testing machine body, which features a positioning type with 10 rotations in both directions, twisting tests can also be conducted at ±3600°. 【Features】 ■ Twisting tests for samples up to φ10mm are possible ■ Attachments that realize twisting tests ■ Twisting tests in accordance with JIS standards are possible ■ CE marking compliant product ■ Twisting tests up to 10 rotations in both directions are also possible *For more details, please refer to the PDF materials or feel free to contact us. *An English version of the catalog is also available for download.

  • Testing Equipment and Devices
  • Strength Testing Equipment
  • Weather resistance test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bending Durability Testing Machine 'DR11MR4-CS-cam-ESA'

Bending Durability Testing Machine 'DR11MR4-CS-cam-ESA'

Equipped with curved shape analysis functionality! A durability testing machine that can also predict the timing of failure from shape changes.

The "DR11MR4-CS-cam-ESA" is a durability testing machine that analyzes the side shape of a sample during bending through image analysis and predicts the failure timing. Developed by the Shishido Laboratory at Tokyo Institute of Technology, it utilizes an image processing algorithm to calculate the shape from the side images of the sample, along with an optical system that enables imaging suitable for this image processing, achieving high-precision shape analysis of the sample. Additionally, it can predict failure timing based on shape changes. 【Features】 ■ Equipped with curved shape analysis function ■ Image analysis of the side shape of the sample during bending ■ Prediction of failure timing ■ The camera position control mechanism allows for constant imaging of the central part of the sample while offsetting the up-and-down movement of the sample during bending *For more details, please refer to the PDF materials or feel free to contact us. *An English version of the catalog is also available for download.

  • Testing Equipment and Devices
  • Strength Testing Equipment
  • Weather resistance test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tabletop Durability Testing Machine - Linear Twisting Test

Tabletop Durability Testing Machine - Linear Twisting Test

We can realize twisting durability tests for linear samples such as cables and fibers!

We would like to introduce the driving source of a durability testing device that continuously performs repetitive movements on samples according to pre-set testing conditions. The tabletop durability testing machine 'DR11MR-TW', suitable for linear twisting tests, enables twisting durability tests for linear samples such as cables and fibers. It can conduct twisting tests in accordance with JIS standards for cables and other materials, with samples being tensioned by appropriately loaded weights. 【Features】 ■ Capable of twisting tests in accordance with JIS standards ■ Capable of twisting tests for samples up to φ10mm ■ Capable of twisting tests for up to 10 rotations in both directions * For more details, please refer to the PDF materials or feel free to contact us. * An English version of the catalog is also available for download.

  • Testing Equipment and Devices
  • Strength Testing Equipment
  • Weather resistance test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tabletop Durability Testing Machine - Press and Pull Test

Tabletop Durability Testing Machine - Press and Pull Test

Limit switch operation test, media insertion and removal test, push button switch pressing test, etc.! Smooth linear reciprocating motion is possible.

This product can evaluate damage from repeated use for various products such as switches, SD cards, and USB memory using a push-in and pull-out testing machine. Samples are fixed to an XYZ table, and testing is conducted through the linear reciprocating motion of the main body of the durability testing machine. The push button switch pressing test is achieved by attaching a jig to the tip of the linear reciprocating axis to press the button. 【Features】 ■ Smooth linear reciprocating motion is possible - The unique motion of the link type, which does not have sudden changes, allows for continued motion without breaking the sample due to impact. ■ Adoption of an XYZ table - Easy adjustment of sample positioning, accommodating various shapes of samples. ■ Stroke length can be changed - The main body of the testing machine allows for arbitrary setting of stroke length, enabling effective use of the testing operation. *For more details, please refer to the PDF materials or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tabletop Durability Testing Machine - Rotating Reciprocating Test

Tabletop Durability Testing Machine - Rotating Reciprocating Test

The cam mechanism allows for precise setting of the reciprocating distance! It can test four samples simultaneously, reducing testing time.

This product is a fixture that performs repeated rotational reciprocating motion on samples such as mounted FPC boards. It allows testing with loads in rotational directions that cannot be achieved with a linear reciprocating cartridge. By replacing the plate inside the driving flange according to the reciprocating distance, it achieves precise strokes. 【Features】 - Accurate setting of reciprocating distance with a cam mechanism - Can test four samples simultaneously, reducing testing time - Usable sample sizes: - Sample thickness: max. 5mm - Sample width: max. 30mm (clamping part: max. 60mm) - Sample length: min. 25mm to max. 100mm *For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tabletop Durability Testing Machine - Linear Reciprocating Test

Tabletop Durability Testing Machine - Linear Reciprocating Test

One fixture enables multi-directional (standard three directions) operation! The cam mechanism allows for precise setting of the reciprocating distance.

This product is a tabletop durability testing machine that allows for changing the direction of movement by rotating it to align with the movement direction. The rotating slide table is fixed with pins (index plungers), making it easy to change settings. With a single linear reciprocating cartridge, it is capable of testing in three directions: vertical, horizontal, and diagonal. 【Features】 ■ Accurate setting of reciprocating distance with a cam mechanism - By replacing the plate inside the driving flange according to the reciprocating distance, precise strokes can be achieved - Linear distance: ±1 to 10mm (can be set in increments of ±1mm) ■ Can test four samples simultaneously, reducing testing time - With four lanes available for use, it allows for testing not only single samples but also different types of samples at the same time, thus shortening testing time. *For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tabletop Durability Testing Machine for Flat Surface Roll Winding Test

Tabletop Durability Testing Machine for Flat Surface Roll Winding Test

Mount the sample vertically! The structure has been designed to reduce the deflection of the sample.

This product is a tabletop durability testing machine that can perform durability tests for winding operations on rolls such as cables and fibers, as well as planar samples like flexible devices. By mounting the sample in a vertical direction, the structure reduces the deflection of the sample. The mounting position of the sample and the position of the load clamp are aligned vertically, allowing for straight winding. 【Features】 ■ The winding roller can rotate forward and backward, allowing for repeated winding and releasing of the sample. ■ Winding of the sample can be done from either the left or right side. *For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small-scale testing machine for flat body roll winding test.

Small-scale testing machine for flat body roll winding test.

The roller rotates forward and backward using a rack and pinion! It repeatedly winds and releases the sample.

This product is a compact testing machine capable of conducting durability tests for winding operations on rolls such as cables and fibers, in addition to flat samples like flexible displays. The roller is rotated forward and backward using a rack and pinion mechanism, allowing for repeated winding and releasing of the sample. For the winding roller, please specify dimensions in the range of φ5 to φ100 mm. 【Features】 ■ Winding of the sample can be performed from both the top and bottom - The amount of sample winding can be set arbitrarily by changing the stroke width of the main body ■ Tilt clamp adopted - The driven side clamp (on the opposite side of the winding roller) moves freely in accordance with the vertical movement of the sample, reducing damage caused by the clamping section. *For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tabletop Durability Testing Machine for Surface U-Bend Test [4-Lane Specification]

Tabletop Durability Testing Machine for Surface U-Bend Test [4-Lane Specification]

Simultaneously test four types of samples! You can change the bending radius of each lane.

This product is a tabletop durability testing machine capable of conducting U-bend durability tests not only for linear samples such as cables and fibers but also for planar samples like flexible displays. The U-bend testing fixture clamps the sample in a U-bent position across four lanes, with only the lower clamp moving in a linear reciprocating motion. 【Features】 - Simultaneous testing of four different types of samples - The four lanes can be used freely, allowing for testing not only of a single sample but also of different types of samples at the same time. - Adjustable bend radius for each lane - By adjusting the upper clamp position of each lane, the bend radius can be set arbitrarily for each lane. - It is easy to conduct comparative tests with different bend radii using the same sample. *For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tabletop Durability Testing Machine Surface Body U-Bend Test

Tabletop Durability Testing Machine Surface Body U-Bend Test

It can be installed with samples up to 215mm wide and 3mm thick! A clamping method that does not limit sample width.

This product is a tabletop durability testing machine that can realize U-shaped folding durability tests for planar samples such as flexible displays. The attachment that embodies the folding test clamps the planar sample in a U-shaped bent state, with only the lower clamping part moving in a linear reciprocating motion. It can accommodate samples with a width of 215mm and a thickness of up to 3mm. 【Features】 ■ Clamping method that does not restrict sample width ■ Samples of the same thickness can be clamped side by side ■ Bending R radius ranges from 0.5 to 5 to 80mm (when sample thickness = 0) ■ Stroke can be adjusted from 0 to ±60mm ■ Constant monitoring of test conditions is possible *For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Curved shape analysis function equipped clamshell-type bending testing machine

Curved shape analysis function equipped clamshell-type bending testing machine

Image analysis of the side shape of samples being bent! Achieving high-precision shape analysis.

This product is a clam-shell type bending testing machine equipped with a curved shape analysis function that allows for constant imaging of the central part of the sample while offsetting the vertical movement caused by bending through a camera position control mechanism. It analyzes the side shape of the sample during bending and predicts the timing of failure. High-precision shape analysis of the sample can be achieved. 【Features】 - Increased torque, achieving 60 rpm even in clam-shell type - Capable of reciprocating motion between any positions for 10 rotations (±3600°) in both forward and reverse - Standard equipped with a disconnection detection function for conductor samples and a counter with a preset function *For more details, please refer to the PDF materials or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tabletop Durability Testing Machine for Flat Body Unloaded U-shaped Stretch Test

Tabletop Durability Testing Machine for Flat Body Unloaded U-shaped Stretch Test

The sample is subjected only to bending loads! This testing machine does not generate tensile or friction loads.

This product is a tabletop durability testing machine that applies bending load by moving one side of the sample straight towards the other side. Only bending load is applied to the sample, and no tensile or friction loads are generated. It allows for a load-free bending test on planar samples such as films and FPCs, without applying tensile or friction forces. 【Features】 ■ Achieves natural bending tests ■ Enables evaluation of samples even during durability testing ■ Allows for load-free U-shaped expansion tests on planar samples without applying tensile or friction forces *For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Self-supporting durability testing machine for simultaneous bending and twisting tests.

Self-supporting durability testing machine for simultaneous bending and twisting tests.

Durability testing is possible with a combined motion of bending and linear twisting! The bending angle and twisting angle are synchronized at a constant ratio.

This product is designed with cables used in robots and similar applications in mind, allowing for tests that simultaneously perform bending and twisting. By linking the oscillation motion of the panel to the clamp at one end of the sample, the sample is bent while being twisted. 【Features】 ■ Durability testing possible with combined bending and linear twisting actions - Durability tests can be conducted under conditions where different actions of bending and linear twisting are applied simultaneously to a single sample. ■ Bending angle and twisting angle are synchronized at a constant ratio - The structure generates a twisting motion synchronized with the bending motion using a gear mechanism. - The ratio of bending/twisting angles can be 1:2 / 1:3 / 1:4. *For more details, please refer to the PDF materials or feel free to contact us.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Testing Machine

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.