Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:May 20, 2026～Jun 16, 2026
This ranking is based on the number of page views on our site.
3031～3060 item / All 3611 items
It is possible to conduct highly reproducible tests.
A&D Company, Limited's semi-automatic tensile testing machine automatically applies the appropriate initial load to the sample just by attaching it, and also performs tasks such as the installation of the extensometer between the gauge marks. *For more details, please contact us.*
It is suitable for compression testing of large samples such as packaged goods and containers.
A&D Company, Limited's cardboard compression testing machine CTM-1350 is suitable for compression testing of large samples such as packaged goods and containers, capable of testing up to a maximum of 50 kN. *For more details, please contact us.
It can be used for performance evaluation of brake materials, etc.
A&D Company, Limited's high-speed pressure friction testing machine is a friction testing machine for ring and rectangular prism samples. It is equipped with a mechanism for applying pressure at high speed and can be used for performance evaluation of brake materials and similar applications. *For more details, please contact us.*
We will measure and evaluate the friction characteristics.
A&D Company, Limited's JADA testing machine measures and evaluates the friction characteristics of wet clutches, including steel plates, friction materials, ATF, and additives, based on temperature, friction force, slip speed, and other factors. *For more details, please contact us.*
It adopts a circulation method and can be heated up to a maximum of 80°C.
A&D Company, Limited's bearing friction and wear testing machine evaluates the friction characteristics of radial bearings and similar components. The lubrication system uses a circulation method and can be heated up to a maximum of 80°C. *For more details, please contact us.*
It can be used for the evaluation of materials across a wide range of fields.
The A&D Company, Limited RPT-3000W rigid pendulum-type physical property tester is a device that allows for the evaluation of the temporal changes in various physical properties during the hardening and drying processes of substances from solution to solid. 〇 Features - Evaluates the physical properties and viscosity information of samples through free damped oscillation of the pendulum. - Utilizes two types of pendulums, edge type and round rod type, switching between them for measurement at the pivot point. - Measurements can be conducted on practical substrates. *For more details, please download the PDF or feel free to contact us.
A tire characteristic testing machine with a load capacity of 25 kN accurately measures small forces even under high load tests.
A&D Company, Limited's flat belt tire testing machine is a testing device equipped with accurate equipment control and precise force measurement. 〇Features - Accurate equipment control - Precise force measurement - Real vehicle driving simulation *For more details, please feel free to contact us.
Reproduction of a flat road test on a platform using actual vehicle suspension.
A&D Company, Limited's belt-type suspension testing machine reproduces steering tests on flat roads on a platform, contributing to the development of driving stability and subtle ride comfort under various driving conditions. 〇Features - The moving belt unit is equipped with air bearings, which are well-regarded in wind tunnel testing machines and tire testing machines. - By incorporating a Wheel Force Sensor (WFS) into the rim, it measures the six forces acting on the tires and the road surface during steering conditions. *For more details, please feel free to contact us.
Tire testing machine using a Φ3.2m drum
A&D Company, Limited's Dynamic Contact Force Testing Rig (DCFR) is a next-generation drum-type testing machine that can measure dynamic tire contact pressure distribution using an FMS (small three-axis force sensor) built into the drum. 〇Features - A large-radius φ3.2m steel drum - High-precision tire stand - Measures various forces generated between the tire and the road surface in an environment close to flat road conditions *For more details, please contact us.
Measurement of rolling resistance in accordance with ISO 28580.
A&D Company, Limited's tire rolling resistance testing machine is a force method tire rolling resistance tester that complies with ISO 28580 and JIS D 4234. 〇 Features - The force gauge guarantees values for Fz (applied force) and Fx (rolling resistance), specifically designed for rolling resistance measurement. - It achieves low temperature drift and high repeatability accuracy. - The tire testing chamber is covered with a chamber, allowing for quick air conditioning of the testing room. *For more details, please contact us.
The use of a force gauge results in high rigidity, enabling high-resolution load measurement.
A&D Company, Limited's tire static stiffness testing machine directly measures the ground reaction force of the tire by placing a plate-type four-component force sensor on the contact surface of the tire. This allows for accurate force measurement without being affected by the deflection of the mechanism or friction. 〇Features - Composed of a rigid testing frame and a servo motor-driven mechanism - Drive components: Z-axis pressurization mechanism, test table X/Y movement mechanism, twisting mechanism, and offset movement mechanism - Measurement of the ground twisting angle and torque by rotating the contact surface of the tire's center *For more details, please contact us.
Scientific elucidation and technical evaluation of the characteristics related to sliding friction, lubrication, and wear.
A&D Company, Limited's EFM-3 series friction and wear testing device is a friction and wear testing apparatus for tribological evaluation tests that complies with JIS K 7218. 〇Features - Complies with JIS K 7218 - Compatible with test specimens such as rings, disks, and pins - Sliding speed range: 0.001 to 1000 cm/sec - Friction force measurement range: 0.02 to 10 N·m - Potential for system customization (addition of measurement and control items, etc.) *For more details, please download the PDF or feel free to contact us.
Evaluation of the durability of the test specimen.
A&D Company, Limited's steering test machine applies repeated rotational loads to the test specimen (steering assembly) to evaluate its durability. 〇 Features - Control of the input drive side/load absorption side by a full digital controller allows for customizable test content as per customer requirements. - We can propose hydraulic servo or electric servo options based on your needs. - We will consider various specifications for performance tests, durability tests, and characteristic tests. *For more details, please contact us.
Torsion durability testing machine, rotating torsion testing machine, torsion fracture testing machine, torsion resonance testing machine, etc.
A&D Company, Limited's torsion testing machines include a torsion durability testing machine, a rotary torsion testing machine, a torsion fracture testing machine, and a torsion resonance testing machine. They are also capable of testing transmission torque and torsional fatigue for vehicle and ship power transmission shafts (propeller shafts) and motor shafts. 〇 Features - Apply any torsional moment to a round bar or cylindrical test piece and measure the test piece. - Capable of measuring strength and yield point against torsion, shear modulus, and torsion angle at fracture. - Measure the number of torsion cycles until fracture, as well as torsion torque values and torsion angles. *For more details, please contact us.
Electric power supply for impulse testers, torsion testing machines, and fatigue endurance testing machines.
A&D Company, Limited's linear testing machine features a gantry frame and is ideal for compression and tensile fatigue durability testing. Depending on the test piece, the actuator can be mounted on either the lower or upper mold. 〇Features - The lower mold type is optimal for small test pieces, while the upper mold is suitable for large test pieces. - Testing machines can be manufactured with not only hydraulic actuators but also electric actuators. - Custom testing machines for users can be created using servo amplifiers and testing software. *For more details, please contact us.
Testing compliant with standards such as FMVSS 210 and UN14 is possible.
A&D Company, Limited - Seat Belt Testing Machine From various tests to report creation, it can be executed seamlessly using dedicated software. 〇Features - Achieves excellent control and responsiveness with a digital controller. - Capable of updating and upgrading the control system. *For more details, please contact us.
Excellent temperature recovery performance and uniform temperature distribution.
Nihon Kasei Co., Ltd. Etak Division Temperature Cycle Tester (Air Chamber Type) WINTECH NEO is a temperature cycle tester equipped with the low GWP refrigerant R-448A (GWP value: 1387), featuring the high basic performance that WINTECH is committed to. ○ Features - Recovery performance achieved in the shortest time - Operating history download function - Standard equipped with room temperature exposure function - A 300℃ specification is also available, enhancing all basic performance for reliability evaluation of power devices *For more details, please refer to the PDF or feel free to contact us.
It can be used safely and with high precision.
Nihon Chemical Co., Ltd. Etak Division High-Temperature Oven HISPEC H Type is a high-temperature oven suitable for a wide range of applications, including heat resistance testing and high-temperature lifespan testing of inorganic materials such as ceramics and various metals, as well as engineering plastics. ○ Features - High performance and high precision! - Safety-focused design - User-friendly controller * For more details, please refer to the PDF or feel free to contact us.
Two-way use of condensation cycle and thermal shock test.
Nakamoto Kasei Co., Ltd. Etak Division Dew Cycle Tester DEW CYCLE reproduces the condensation conditions of electronic devices moving in environments with temperature and humidity differences, in a setting that is closer to reality. Its 2-way use allows for efficient operation. ○Features - Modes can be easily switched based on input conditions on the operation screen - User-friendly mechanism - Polymer sensor *For more details, please contact us.
Class-leading performance and widely compatible with globally required testing standards.
Nihon Kasei Co., Ltd. Etak Division Rapid Temperature Change Tester weisstechnik ClimeEvent is the global standard for rapid temperature change testers. It can comfortably accommodate various testing standards. ○ Features - Fastest rapid temperature change of 25°C/min and maximum heating load of 8kW - Wide temperature and humidity range with good humidity tracking due to a unique humidification method - Original mechanism provides a more comfortable testing environment *For more details, please refer to the PDF or feel free to contact us.
Compliant with the latest version ISO 9227:2022! Salt spray test machine "STP-100"
【 Conforms to the latest version ISO 9227:2022 】 - A salt solution is uniformly sprayed in the test chamber to test the corrosion resistance (rust resistance) of metal materials and surface treatments. - We are quick to respond to the latest international standards.
This is an artificial light source accelerated degradation testing machine for evaluating accelerated durability under "environmental" conditions in a shorter period.
The weather resistance test is a test that artificially creates natural environmental conditions such as light (ultraviolet and visible light), heat, condensation, humidity, and rainfall to accelerate the aging degradation of products. The "Super Accelerated Weather Resistance Test Machine - Metal Weather" is a test machine that uses a metal halide lamp system, allowing various conditions to be set according to the degradation factors of interest. It offers approximately 10 times the acceleration compared to sunshine or xenon, resulting in reduced testing time and lower running costs, making it economically advantageous and suitable for research and development as well as quality evaluation.
Three-phase type capable of outputting 100VA per phase.
It is a three-phase distortion-free relay tester. Output capacity is 100 VA per phase in the 125 V range. It outputs both AC and DC.
Services that support compliance with various regulations in response to regulatory requirements!
Our company provides evaluation services for a variety of products, including medical electrical equipment, in vitro diagnostic devices, measurement and analysis equipment, industrial machinery, and information technology devices. The medical electrical equipment standards have obtained ISO/IEC 17025 accreditation as a product safety testing laboratory. Additionally, the accreditation scope includes standards for in vitro diagnostic (IVD) medical devices and measurement and analysis equipment. As a domestic third-party testing laboratory that is not influenced by specific manufacturers or foreign capital, we always provide services from the customer's perspective. Please feel free to consult us if you have any requests. 【Applicable Testing Standards (Product Categories)】 ■ Medical electrical equipment ■ In vitro diagnostic medical devices ■ Electrical equipment for measurement, control, and testing laboratories ■ Industrial machinery ■ Information technology devices, etc. *For more details, please download the PDF or feel free to contact us.
High-performance testing equipment with a compact design
Our company offers a testing device for LED lighting aimed at achieving energy savings through just-in-time lighting, providing the necessary amount of light in the required locations. The LED lighting is automatically directed towards the detected direction of a person through the operation of a pyroelectric sensor and a stepping motor connected to the LED lighting. Please feel free to contact us if you have any inquiries. 【Main Features】 ■ The brightness of the LED lighting automatically changes based on the ambient brightness detected by the illuminance sensor. ■ The USB camera mount is automatically directed towards the detected direction of a person through the operation of a stepping motor connected to the pyroelectric sensor and USB camera mount. *For more details, please feel free to contact us.
A mechanism that achieves outstanding reproducibility and stability is fully equipped! It enables uniform thin film coating with a small amount of ink and coating agents!
This is an electric gravure printing test machine independently developed by Kurabo for the field of gravure printing and gravure coating. It can create highly reproducible gravure printing samples from a small amount of materials (gravure ink and coating agents) with simple operations. It is adaptable for printing on a variety of materials, making it useful not only as a test coater for color matching in gravure printing factories but also as a coating machine for test coatings in the research and development of new materials by ink manufacturers, film manufacturers, and paper manufacturers.
Portable 10GbE x4 Packet Capture Appliance
* With four SFP+-compatible 10GbE capture ports and 8TB of built-in storage, this palm-sized unit measures approximately 20x15x8.5cm and weighs approximately 2.5kg, making it suitable for use anywhere. * Developed based on Intel DPDK/SPDK, it features a high-speed FPGA capture board and NVMe storage. It easily handles a maximum receive rate of 40Gbps from the four 10GbE capture ports and can save data as PCAP files to RAID storage. * It provides all-in-one functionality, including PCAP extraction with pre-capture/post-capture filters, easy-to-use PCAP playback, microburst detection, and NetFlow v9/v10 output. * The control Web GUI is fully compatible with English and Japanese.
Tester for measuring the ratio error of current ★★★ Instruments for distribution boards, control panels, distribution panels, and panels.
The high-voltage MOF is used to measure the ratio error between primary and secondary currents while energized, and it has a function for determining the phase relationship between the primary and secondary currents, which allows for a reduction in inspection time. Features: - Primary current detection unit: Wirelessly transmits current values from the primary line (high voltage). The error range is minimized in three stages based on the current magnitude: 4A/40A/200A. - Secondary current detection unit: As a device that transmits current to the main unit via wired connection, it is always set to a measurement range of 4A, and there are three units that can simultaneously connect R phase (yellow), S phase (brown), and T phase (black). - Main unit: Utilizes the primary/secondary current detection units to collect data, synchronize time, and perform calculations. Based on the results, it alerts the user to the presence or absence of abnormalities in the MOF, allowing for the display, storage, and output of various data for user judgment. Inspection data is presented in detailed values such as measured values, ratio error values, C.T. ratios, etc., and can be stored for up to 10 units. MOF Current Ratio Error Tester For inquiries, please contact "lightstar_1979@yahoo.co.jp".
For the evaluation of sheet materials such as rubber and film! Tensile strength and sample size can be customized.
This product allows you to freely set tensile forces in the X-axis and Y-axis directions, enabling biaxial tensile testing. You can set both the forward and return speeds, allowing for testing under a wider range of conditions. Additionally, uniaxial tensile testing can also be performed. Please use it not only for material evaluation but also for understanding characteristics. 【Features】 ■Independent operation of X-axis and Y-axis ■Chucks compatible with a wide range of samples ■Support for special specifications *For more details, please download the PDF or feel free to contact us.
Automating the measurement of contact cold sensation! It complies with JIS standards and GB standards.
The "THERMOFEEL (PF-QMM-01)" is a contact cooling sensation testing device that allows anyone to measure qmax with high precision through easy operation. (qmax = a value representing contact cooling sensation.) A single measurement (from start to data saving) is completed in about one minute. Additionally, CSV data is automatically saved with each measurement, making it very convenient for continuous measurements. It is also suitable for performance testing of contact cooling masks. Please feel free to contact us if you have any requests. 【Specifications (excerpt)】 ■ Main unit size: 150mm × 250mm × 300mm / 2kg ■ Components: PC software, main unit, cooler amplifier ■ Samples: Clothing, fabric products, interior materials, and other fabric-like items ■ Measurement value: Maximum heat flux qmax (J/cm² sec) Measurement temperature differences: ΔT10℃ / ΔT15℃ / ΔT20℃ *For more details, please download the PDF or feel free to contact us.
