Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 03, 2025～Sep 30, 2025
This ranking is based on the number of page views on our site.
3091～3105 item / All 3442 items
It is a testing machine that evaluates the hardness of a coating film by pressing a pencil of known hardness against the coating film using the pencil hardness method.
The D-NP type also supports the Clemens scratch hardness test for decorative panels.
High precision, robust, noise-resistant torque meter (torque gauge)
A flange-type torque meter that measures the torque of the rotating axis non-contactly. It is resistant to electromagnetic noise, features robustness due to the margin of the limit torque, high precision, and a wide measurement range, which are characteristics of the ATESTEO torque meter.
Test the gas volume of carbonated beverages, regardless of glass bottles, PET bottles, or cans!
This product is a device for testing the gas volume of carbonated beverages, regardless of whether they are in glass bottles, PET bottles, or cans. It is equipped with a dual-scale pressure gauge (0-60 psi & 0-4.2 kg/cm²) and an adjustable 2-inch dial thermometer (25/125ºF & -5/55ºC). Additionally, we offer types that can measure up to 1 liter and 3 liters. With the "Series 6000 Piercing Device," it is necessary to use the included chart to convert the gas volume. However, by replacing the pressure gauge and thermometer with the DGV-1, it becomes the "Series 14000 (DGV-1 Piercing Device)," allowing for easier and more accurate measurement of gas volume. 【Features】 ■ Capable of testing the gas volume of carbonated beverages in glass bottles, PET bottles, and cans ■ Equipped with a dual-scale pressure gauge ■ Equipped with an adjustable 2-inch dial thermometer ■ Available in two types that can measure up to 1 liter and 3 liters *For more details, please refer to the catalog or feel free to contact us.
We respond to short delivery times from a single crucible. We also accept processing of sintered materials such as silicone, ceramics, glass, and quartz.
We manufacture silicon crucible testers. Silicon is used for material research due to its low impurity levels. We can process any type of sintered material, including ceramics, glass, and quartz. Please make use of our products for research and development in semiconductor manufacturing equipment and for experimental purposes. 【Features】 ■ Leveraging nearly 60 years of experience to propose optimal processing methods ■ A short delivery system that can deliver in as little as one week from order *For more details, please refer to the materials available for download in the catalog. Feel free to contact us with any inquiries.
![[English Market Research Report] Global Market for EMC Shielding and Testing Equipment](https://image.mono.ipros.com/public/product/image/4f7/2001182955/IPROS17059381866701131771.png?w=280&h=280)
"Free samples" are currently available! Please check the application method from the [PDF download] button, or apply directly through the related links.
The EMC shielding and testing equipment market size is expected to grow at a CAGR of 6.1% during the forecast period, reaching 11.9 billion USD by 2030. However, high costs pose a significant challenge for the market, particularly for small and medium-sized enterprises with limited budgets. Effective EMC shielding often requires specialized materials such as conductive coatings, metal foils, and ferrites. Therefore, all of these factors may hinder market growth.
Testing is possible for samples weighing up to 5 kg! Fixing and detaching of samples is performed using a pneumatic cylinder.
The "DT-205 Series" is a lightweight drop testing machine that achieves high-precision drop tests by allowing the test sample to free fall in the set posture until just before impact, using a fixed drop method for the test samples. The drop height can be easily set using the scale markings. It features a safety design that prevents the release and drop of the test sample during a power outage. Additionally, we offer a high-durability model, the "DT-205M Series," which supports high-cycle drop tests while maintaining the same usability as the original product. This model uses a motor for the lifting operation of the test sample indicator. 【Features】 ■ High-precision drop model ■ Capable of testing samples weighing up to 5 kg ■ Fixing and releasing of the test sample is performed using a pneumatic cylinder ■ Drop height can be easily set using the scale markings ■ Safety design prevents the release and drop of the test sample during a power outage ■ Operated via a remote controller Applicable standards: JIS C 60068-2-31, IEC 60068-2-31 *For more details, please download the PDF or feel free to contact us.
Establishing an accurate thermal aging test unaffected by external conditions! Unique design of flow meter method and preheating tank.
The "TG100/216" is a thermal aging testing machine for evaluating the lifespan of rubber and plastic materials. For the important setting of air replacement rate in thermal aging tests, it adopts the easy-to-operate flow meter method recommended by ISO 188. A digital flow meter is used to measure the air flow rate, allowing real-time confirmation of the flow rate on the flow display. 【Features】 ■ Establishes accurate thermal aging tests unaffected by external air ■ Unique design of flow meter method and preheating chamber ■ Proprietary developed filter Applicable standards: JIS K 6257, JIS K 7212, JIS A 6111, ISO 188 *For more details, please download the PDF or feel free to contact us.
Various tests of high-voltage receiving equipment and cogeneration facilities can be performed with this single unit.
The "RX47022" is a voltage 2-phase, current 2-phase protection relay tester that supports various digital relay tests. It reduces the need for multiple dedicated testers for different relays, which previously required transportation and wiring, and is equipped with auxiliary power output, allowing it to drive the protection relays being tested. Additionally, all wiring and operation of the tester can be performed on the operation panel. 【Features】 ■ Lightweight and compact, easy to transport and install ■ Condenses a wealth of testing functions into one unit ■ Easy to set up tests and collect test results ■ Terminal and operation controls are integrated on the operation panel *For more details, please download the PDF or feel free to contact us.
Compatible with JASO M 609:2024, featuring a durable resin mist sprayer.
The "CYP-100" is a combined cycle testing machine capable of conducting salt spray, drying, wetting, and outdoor air introduction cycle tests, as well as standalone tests. Performance verification is conducted using salt spray methods A, B, and C, in addition to testing according to ISO 14993. In addition to the salt spray method, options for salt shower and salt immersion methods are available. Furthermore, it employs a resin mist atomizer that maintains the same spraying performance as traditional glass ones while significantly improving durability (warranty period: 3 years). 【Features】 ■ Complies with domestic and international testing conditions ■ Durable resin mist atomizer (patent pending, design registered) ■ Allows for the installation of a large number of test specimens at once ■ Reduces water usage by over 30% ■ Easy-to-maintain structure ■ Tests conducted with stable salt concentration and pH ■ Establishes traceability with international measurement standards * Calibration and issuance of calibration certificates compliant with ISO/IEC 17025 are possible (spray pressure gauge, test chamber temperature sensor, air saturator temperature sensor) * For more details, please download the PDF or feel free to contact us.
Developed to meet the needs of "wanting to install in a small space" and "wanting to test a small amount of samples"!
The "STP-30" is a compact salt spray testing machine that can be installed on a tabletop, yet it allows for high-precision testing in compliance with international standards. It features a uniquely developed spray chamber and test chamber structure. Even within the small test chamber, the spray falls naturally, enabling a uniform spray. Additionally, due to its low drainage volume, wastewater can be collected in a plastic tank, and by using an optional exhaust treatment device to process the salt mist, special installation work such as piping for water supply and drainage is unnecessary. 【Features】 ■ Achieves a compact size that can be installed on a tabletop ■ Enables high-precision testing in compliance with ISO and JIS standards ■ No installation work required *For more details, please download the PDF or feel free to contact us.
Dedicated for spring mattresses! A program to display the deflection amount of 8.1.2 is also available.
The "HR-5512" is a mattress durability testing machine according to JIS S1102:2004 branch number: 8.1.1. It is a product designed to verify the durability "sag amount" of spring mattresses used for sleeping in ordinary residential beds. A program is also available to calculate the test data and display the results (8.1.2 deflection amount). Please feel free to contact us when you need assistance. 【Features】 ■ Can be installed up to double size (abbreviation 14) (1400W x 1950L) ■ Dedicated to spring mattresses *For more details, please download the PDF or feel free to contact us.
It is possible to freely drop from a specified height along the vertical guide!
The HR-6117 is an impact testing machine for JIS T8101:2006 branch number: 9.1 a) impact testing machine and 9.8 a) toe protector impact testing machine. It can freely drop a steel striker with a mass of 20kg ± 0.2kg from a specified height along a vertical guide. Please feel free to contact us if you have any requests. 【Features】 ■ Comes with two types of steel strikers and a clamp fixture (fixed fixture) ■ Strikers and clamp fixtures are interchangeable *For more details, please download the PDF or feel free to contact us.
Measuring the residual strain of repeated compression specifically for soft foam materials (urethane foam)!
The HR-5509 is a testing machine for JIS K6400-4:2004 Branch number: 6.2.1 Repeated Compression Residual Strain Test Method B (Constant Displacement Method). The stroke adjustment range is 10mm to 100mm, and the specimen size is 50mm to 100mm in width and length. The number of tests is 80,000, and settings can be changed. Please feel free to contact us if you have any requests. 【Features】 ■ Repeated compression speed: 60 times/minute ■ Specimens of width and length: 50mm to 100mm can be installed (Up to 4 specimens of 100mm size can be installed) ■ Stroke adjustment range: 10mm to 100mm * For more details, please download the PDF or feel free to contact us.
Testing for IP×4 (splashing water) and IP×6 (jet water) is possible!
The "HR-5124" is a sprinkler test device that complies with JIS C 0920:200J3 branch number: 14.2.4 (IPx4) and 14.2.6 (IPx6). This product is designed to verify the performance of protection against water (IP code) and allows for the adjustment of the amount of water and water pressure. The range of sprinkler height is 1000 to 4000 mm, and the size of the test specimen that can be installed is approximately 1000 mm to 3000 mm in height. 【Features】 ■ Capable of testing IPx4 (water splashing) and IPx6 (jet spray) *For more details, please download the PDF or feel free to contact us.
The tensile load is up to 200N! Testing is possible up to the maximum JIS standard of 39cm for the double-handled pot.
The "HR-5011" is a handle strength testing machine (tensile) for pots and frying pans, and kettles, according to JIS S2010:1997 branch numbers: 7.5.1 and 7.5.2. It can pull with a maximum force of 200N and can maintain the set force for one minute. It is compatible with both two-hand pots and one-hand pots, as well as kettle handles. 【Features】 ■ Capable of testing two-hand pots up to the maximum JIS standard of 39cm ■ Compatible with handles of two-hand pots, one-hand pots, and kettles *For more details, please download the PDF or feel free to contact us.
