Testing Machineのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

Testing Machine - メーカー・企業762社の業務用製品ランキング | イプロスものづくり

更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

Testing Machineのメーカー・企業ランキング

更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. 東洋精機製作所 Tokyo//Testing, Analysis and Measurement
  2. TOKYO KOKI TESTING MACHINE CO.LTD. Kanagawa//Testing, Analysis and Measurement
  3. 日本ビジネスロジスティクス（JBL） 藤沢北事業所 Kanagawa//Testing, Analysis and Measurement
  4. 4 null/null
  5. 5 アイ・ティー・エス・ジャパン Chiba//Testing, Analysis and Measurement
企業ランキングへ

Testing Machineの製品ランキング

更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. [Technical Report] Introduction to the Composite Environmental Vibration Testing Equipment
  2. Invitation to Exhibit at the 2026 NAGOYA Automotive Technology Exhibition
  3. Vibration Diagnosis Unit "VD-unit" Operation Case Studies ＩＭＶ
  4. 4 Manufacturing of thermal shock testing machines and heating and cooling testing machines. 松澤製作所
  5. 5 Extended warranty service "HP Care Pack" 日本HP

Testing Machineの製品一覧

931～960 件を表示 ／ 全 3621 件

表示件数
High Pressure Load Testing Device "H-5MC"

High Pressure Load Testing Device "H-5MC"

Introduction of the high-pressure load testing device 'H-5MC' that has passed JESA's technical standards.

The "H-5MC" is a high-pressure load testing device that has passed JESA's technical standards. [Overview] - Details of each testing device are for reference. - There may be differences from the details displayed by the testing devices. - Catalogs, dimensional drawings, and single-line diagrams are reference materials. - Rental of portable high-pressure load testing devices is not available. - High-pressure testing is conducted by our company’s testing personnel. - Permanent high-pressure load testing devices are available for rental and lease. *For more details, please refer to the catalog or feel free to contact us.

  • others
  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Special High Voltage Load Test Device 'HH-3MC'

Special High Voltage Load Test Device 'HH-3MC'

Introduction of the special high-voltage load testing device 'HH-3MC' that has passed JESA's technical standards.

The "HH-3MC" is a special high-voltage load testing device that has passed JESA's technical standards. [Overview] ■ Details of each testing device are for reference. ■ There may be differences between the details displayed by the testing devices and the actual specifications. ■ Catalogs, outline drawings, and single-line diagrams are reference materials. ■ We do not offer rentals for portable high-voltage load testing devices. ■ High-voltage tests are conducted by our company’s testing personnel. ■ Permanent high-voltage load testing devices are available for rental or lease. *For more details, please refer to the catalog or feel free to contact us.

  • others
  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High Pressure Load Testing Device "H-5MSC"

High Pressure Load Testing Device "H-5MSC"

Introduction of the high-pressure load testing device 'H-5MSC' that has passed JESA's technical standards.

The "H-5MSC" is a high-pressure load testing device that has passed JESA's technical standards. 【Overview】 ■ Details of each testing device are for reference. ■ There may be differences between the details displayed by the testing devices. ■ Catalogs, dimensional drawings, and single-line diagrams are reference materials. ■ Permanent high-pressure load testing devices are available for rental and lease. ■ Portable high-pressure load testing devices are available for rental and lease. ■ High-pressure tests are conducted by our company’s testing personnel. *For more details, please refer to the catalog or feel free to contact us.

  • others
  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Low Pressure Load Testing Device 'L-10 (Vertical Type)'

Low Pressure Load Testing Device 'L-10 (Vertical Type)'

Introduction of the low-pressure load testing device 'L-10 (vertical type)' that has passed JESA's technical standards.

The "L-10 (vertical type)" is a low-pressure load testing device that has passed JESA's technical standards. [Overview] ■ Details of each testing device are for reference. There may be differences from the details displayed by the testing devices. The catalog and dimensional drawings are reference materials. ■ We offer equipment rentals. For first-time rental customers, our testing staff will provide operation instructions on-site. We also offer rental of reactor transformers, so please consult with us. ■ Only permanent types are available for lease and sale. We have other options available as well. Additionally, we can manufacture devices to specifications that match your generator. Please feel free to call us. *For more details, please refer to the catalog or feel free to contact us.

  • others
  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Low Pressure Load Testing Device 'L-3MC'

Low Pressure Load Testing Device 'L-3MC'

Introduction of the low-pressure load testing device 'L-3MC' that has passed JESA's technical standards.

The "L-3MC" is a low-pressure load testing device that has passed JESA's technical standards. [Overview] ■ The details of each testing device are for reference. There may be differences from the details displayed by the testing devices. The catalog and dimensional drawings are reference materials. ■ We offer equipment rental. For first-time rental customers, our testing staff will provide operation instructions on-site. We also offer rental of reactor transformers, so please consult with us. ■ Only permanent types are available for lease and sale. We have other options available as well. Additionally, we can manufacture devices to specifications that match your generator. Please feel free to call us first. *For more details, please refer to the catalog or feel free to contact us.

  • others
  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Low-pressure dry load testing device 'L-3SV' [Compatible with server racks]

Low-pressure dry load testing device 'L-3SV' [Compatible with server racks]

Server rack portable load testing device! Ultra-compact and easy to carry!

The "L-3SV" is a low-pressure dry load testing device that can be mounted in a server rack. It is very compact and lightweight compared to conventional products, making it easy to transport. 【Features】 ■ Compact and Lightweight The device itself is very small and lightweight, allowing one person to carry it. This helps reduce transportation costs. ■ Proven Tatsumi Brand This is a "safe and reliable" load testing device from Tatsumi Hishiki, which has released many dry load testing devices to the market. *For more details, please contact us or download the catalog to view.

  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
High Voltage Dry Load Test Device "U Series" [Space-Saving]

High Voltage Dry Load Test Device "U Series" [Space-Saving]

A high-pressure load testing device that achieves a space-saving of 1/2 to 1/3 of conventional designs has arrived! If it's a split-type, transportation is also easy!

The high-voltage dry load testing device "U Series" is a dry load testing device for high-voltage power generation equipment. Compared to conventional high-voltage devices, it achieves significant space savings (compared to our previous models), making it suitable for load testing in limited spaces. It is suitable for 30% load testing of power generation equipment ranging from 1000 kVA to 2000 kVA. 【Features】 ■ Significant Space Savings We have succeeded in achieving a space reduction of 50-60% compared to our previous high-voltage load testing devices. As a result, load testing can now be conducted in locations where it was previously only possible by combining low-voltage devices with transformers, using only high-voltage devices. ■ Split Type Available The load testing devices of the "U Series," including this product, can be delivered in split form, making installation on rooftops easy. *For more details, please contact us or download the catalog to view.

  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Leak Test Selection Guide: A Must-Read for Those Considering Introducing Their First Airtightness Evaluation Test

Leak Test Selection Guide: A Must-Read for Those Considering Introducing Their First Airtightness Evaluation Test

Explaining the key points for selecting tests, including the content of leak tests that you can't ask about now and the judgment points regarding material influence!

This book is a summary of key points for those who are selecting leak tests for the first time or are considering leak tests in the future. We hope it serves as a helpful resource for deepening your understanding of leak tests. 【Overview】 ■ What is a leak test? ■ Points to consider when selecting an applicable leak test 1. The required airtightness level for the product 2. Whether to use pressurization or depressurization 3. Introduction, running costs, and the criteria for passing or failing the test 4. Consideration of test disturbances 5. Judgments regarding the material effects on the test subject product *The materials can be viewed via [PDF Download]. Feel free to contact us with any inquiries.

  • Leak Testing Equipment
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Vibration Durability Testing Machine 'MVE-10K'

Vibration Durability Testing Machine 'MVE-10K'

Introducing a helper for product development! A durability testing device that applies vibrations to test products at any temperature setting.

Matsuda Manufacturing's "MVE-10K" is a durability testing device that can apply vibrations to test products under any temperature environment. It is possible to set the frequency and amplitude of the vibrations. Additionally, the temperature settings can be changed as needed. 【Features】 ■ A durability testing device that can apply vibrations to test products ■ Ability to set the frequency and amplitude of vibrations ■ Ability to change temperature settings as needed *For more details, please refer to the PDF document or feel free to contact us.

  • Vibration Testing
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Adhesion Strength Distribution Testing Device

Adhesion Strength Distribution Testing Device

Evaluation of adhesion strength distribution between particle-wall and particle-particle.

A particle property evaluation device utilizing the scattering phenomenon caused by airflow can assess the adhesion strength distribution between particles and walls, as well as between particles. By varying the airflow over time on the fine particles deposited on the test piece, the scattering characteristics at that time are evaluated.

  • 企業： IMP
  • 価格：Other
  • Other powder equipment
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Thomson Blade Performance Testing Machine "TSV Type"

Thomson Blade Performance Testing Machine "TSV Type"

This is a notice from Mutou Design Co., Ltd. regarding the "Thomson Blade Performance Testing Machine, Model TSV."

This is a device for inspecting the extraction unevenness of label Thomson blades. By adjusting the pressing distance in increments of 0.01mm, the extraction unevenness can be visually confirmed. 【Features】 ■ A load cell-equipped screw servo is used in the pressing section, achieving high precision with a repeatability of ±0.01mm. ■ The dedicated software allows for recording and managing distance and pressing load. ■ A powder brake is employed in the unwinding section to maintain a constant tension on the test paper material.

  • others
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
FtrLFV-E1000 Engine Cylinder Flow Test Device

FtrLFV-E1000 Engine Cylinder Flow Test Device

World's first "Visualization Engine Measurement Unit" - Towards a new de facto standard in engine development.

This is a measurement experimental device that introduces 2D three-component stereo PIV technology to visualize and analyze the flow inside an engine sleeve. It is a compact stereo PIV measurement device that consolidates the know-how accumulated from previous contract work. We support various characteristic values such as average velocity, turbulence, average tumble ratio, and average swirl ratio, from preparation for shooting to report creation. ■ Safety Measures and Automated Measurement Tasks Since the laser device, optical path, engine sleeve, and tracer particle generator are housed within the device casing, measurements can be conducted safely without seeing the laser light or being exposed to tracer particles. Additionally, by maximizing automation from the measurement task to the output of PIV data analysis results, even those without PIV experience can easily obtain results.

  • Other measurement, recording and measuring instruments
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
JISL1951 and JISL1926 Heat Insulation Test Equipment

JISL1951 and JISL1926 Heat Insulation Test Equipment

Introducing a testing machine that measures the heat insulation performance of textile fabrics using an artificial sunlight lighting system powered by AC100V!

We would like to introduce the "Thermal Insulation Testing Device" handled by Hayasaka Riko Co., Ltd. This product is a testing machine used to measure the thermal insulation performance of textile fabrics using artificial solar lighting. By changing some components on the same frame, it is also possible to evaluate the surface temperature of the fabric after light is converted into heat (light absorption heat generation). 【Product Details】 ■ Device: AC100V operation ■ Includes thermal radiation receivers (12 each) and specimen holders (12) ■ Includes camera stand and thermography ■ Options: Testing environment, PC rack, etc. ■ Standard numbers: JISL1951:2019 Branch number: 6-6.3 Thermal insulation JISL1926:2019 Branch number: 5-5.2 Light absorption heat generation *For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
JIST8101 Impact Testing Machine (Safety Shoes)

JIST8101 Impact Testing Machine (Safety Shoes)

Equipped with a manual winch! By replacing the striker, you can also conduct impact tests on the ankle protector.

This product is an impact testing machine that can freely drop a steel striker with a mass of 20±0.2 kg from a specified height along a vertical guide to impart a specified impact energy to safety shoes. By replacing the striker, it is also possible to conduct impact tests on toe protectors. Additionally, two types of shoe fixation parts are included. 【Features】 ■ Can impart specified impact energy to safety shoes ■ Allows free fall of a steel striker from a specified height along a vertical guide ■ Equipped with a manual winch ■ Drop mechanism: AC100V drive ■ Includes shoe fixation parts (2 types) ■ Compliance standard: JIST8101:2006, branch numbers: 9.1, 9.8 *For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
JISS1102 Mattress Durability Testing Machine

JISS1102 Mattress Durability Testing Machine

The stroke is 50mm to approximately 250mm! A testing machine to check the durability "sagging amount" of spring mattresses.

This product is a testing machine used to confirm the durability "sag amount" of spring mattresses used for residential regular beds. The applied load value is 1000N (Max: 1500N). The speed is 160 cycles ±10 cycles/min, and it can be arbitrarily changed from 60 cycles/min to 160 cycles/min. The testing machine is driven by three-phase 200V, and the measurement section is powered by AC100V. Please note that the primary side power supply work is not included. 【Specifications】 ■ Standard Number: JISS1102:2004 Branch Number: 8.1.1 ■ Test Subject: Spring Mattress ■ Applied Load Value: 1000N (Max: 1500N) ■ Stroke: 50mm to approximately 250mm ■ Speed: 160 cycles ±10 cycles/min (can be arbitrarily changed from 60 cycles/min to 160 cycles/min) - However, for settings between 60 cycles/min and 150 cycles/min, if the mattress's reaction force and stroke amount differ, time measurement and adjustment are necessary. *For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
JISK6400-4 Repeated Compression Residual Strain Testing Device

JISK6400-4 Repeated Compression Residual Strain Testing Device

Repetitive compression testing machine specifically for soft foam materials (urethane foam) conforming to standard JISK6400-4.

This product is a repeated compression testing device for measuring the residual strain of soft foam materials (urethane foam). The specimen size can be up to 400mm square. The standard thickness is 50mm ± 2mm (up to a maximum of 100mm). It is equipped with an air cylinder, and the repeated compression load ranges from 140N to 1000N. 【Specifications (partial)】 ■Applicable standard: JIS K6400-4:2004, Subsection: 6.1, Method A (Constant Load Method) ■Number of specimens: 1 ■Repeated compression speed: 70 times/min (adjustable between 30 to 99 times/min) ■Repeated compression load: 140N to 1000N ■Number of tests: 80,000 times (number can be changed) ■Stroke: To be discussed *For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Vickers hardness testing machine 'Wilson All-in-One VH3100'

Vickers hardness testing machine 'Wilson All-in-One VH3100'

It is designed to be easy to operate! Introducing the 125mm vertical function model!

The "Wilson All-in-One VH3100" is an industry-leading full automation model. Equipped with a bright field overview camera featuring a 13×13mm FOV, it meets the stringent demands of hardness testing machines used in production management. Please feel free to contact us if you have any inquiries. 【Features】 ■ Industry-leading full automation model ■ Meets the stringent demands of hardness testing machines used in production management ■ Equipped with various functions of DiaMet ■ Designed for easy operation ■ 125mm vertical function model *For more details, please refer to the PDF document or feel free to contact us.

  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
JIS C60068-2-31 and other drop test machines DT-205 series

JIS C60068-2-31 and other drop test machines DT-205 series

Testing is possible for samples weighing up to 5 kg! Fixing and detaching of samples is performed using a pneumatic cylinder.

The "DT-205 Series" is a lightweight drop testing machine that achieves high-precision drop tests by allowing the test sample to free fall in the set posture until just before impact, using a fixed drop method for the test samples. The drop height can be easily set using the scale markings. It features a safety design that prevents the release and drop of the test sample during a power outage. Additionally, we offer a high-durability model, the "DT-205M Series," which supports high-cycle drop tests while maintaining the same usability as the original product. This model uses a motor for the lifting operation of the test sample indicator. 【Features】 ■ High-precision drop model ■ Capable of testing samples weighing up to 5 kg ■ Fixing and releasing of the test sample is performed using a pneumatic cylinder ■ Drop height can be easily set using the scale markings ■ Safety design prevents the release and drop of the test sample during a power outage ■ Operated via a remote controller Applicable standards: JIS C 60068-2-31, IEC 60068-2-31 *For more details, please download the PDF or feel free to contact us.

  • Impact Test
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
JIS K6257 Other Gear Aging Test Machine 'TG100/216'

JIS K6257 Other Gear Aging Test Machine 'TG100/216'

Establishing an accurate thermal aging test unaffected by external conditions! Unique design of flow meter method and preheating tank.

The "TG100/216" is a thermal aging testing machine for evaluating the lifespan of rubber and plastic materials. For the important setting of air replacement rate in thermal aging tests, it adopts the easy-to-operate flow meter method recommended by ISO 188. A digital flow meter is used to measure the air flow rate, allowing real-time confirmation of the flow rate on the flow display. 【Features】 ■ Establishes accurate thermal aging tests unaffected by external air ■ Unique design of flow meter method and preheating chamber ■ Proprietary developed filter Applicable standards: JIS K 6257, JIS K 7212, JIS A 6111, ISO 188 *For more details, please download the PDF or feel free to contact us.

  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Voltage 2-phase Current 2-phase Protection Relay Tester 'RX47022'

Voltage 2-phase Current 2-phase Protection Relay Tester 'RX47022'

Various tests of high-voltage receiving equipment and cogeneration facilities can be performed with this single unit.

The "RX47022" is a voltage 2-phase, current 2-phase protection relay tester that supports various digital relay tests. It reduces the need for multiple dedicated testers for different relays, which previously required transportation and wiring, and is equipped with auxiliary power output, allowing it to drive the protection relays being tested. Additionally, all wiring and operation of the tester can be performed on the operation panel. 【Features】 ■ Lightweight and compact, easy to transport and install ■ Condenses a wealth of testing functions into one unit ■ Easy to set up tests and collect test results ■ Terminal and operation controls are integrated on the operation panel *For more details, please download the PDF or feel free to contact us.

  • 5-2.png
  • 5-3.png
  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
JASO M 609 Composite Cycle Testing Machine 'CYP-100'

JASO M 609 Composite Cycle Testing Machine 'CYP-100'

Compatible with JASO M 609:2024, featuring a durable resin mist sprayer.

The "CYP-100" is a combined cycle testing machine capable of conducting salt spray, drying, wetting, and outdoor air introduction cycle tests, as well as standalone tests. Performance verification is conducted using salt spray methods A, B, and C, in addition to testing according to ISO 14993. In addition to the salt spray method, options for salt shower and salt immersion methods are available. Furthermore, it employs a resin mist atomizer that maintains the same spraying performance as traditional glass ones while significantly improving durability (warranty period: 3 years). 【Features】 ■ Complies with domestic and international testing conditions ■ Durable resin mist atomizer (patent pending, design registered) ■ Allows for the installation of a large number of test specimens at once ■ Reduces water usage by over 30% ■ Easy-to-maintain structure ■ Tests conducted with stable salt concentration and pH ■ Establishes traceability with international measurement standards * Calibration and issuance of calibration certificates compliant with ISO/IEC 17025 are possible (spray pressure gauge, test chamber temperature sensor, air saturator temperature sensor) * For more details, please download the PDF or feel free to contact us.

  • 6-2.png
  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
JIS Z 2371 Salt Spray Test Machine 'STP-30'

JIS Z 2371 Salt Spray Test Machine 'STP-30'

Developed to meet the needs of "wanting to install in a small space" and "wanting to test a small amount of samples"!

The "STP-30" is a compact salt spray testing machine that can be installed on a tabletop, yet it allows for high-precision testing in compliance with international standards. It features a uniquely developed spray chamber and test chamber structure. Even within the small test chamber, the spray falls naturally, enabling a uniform spray. Additionally, due to its low drainage volume, wastewater can be collected in a plastic tank, and by using an optional exhaust treatment device to process the salt mist, special installation work such as piping for water supply and drainage is unnecessary. 【Features】 ■ Achieves a compact size that can be installed on a tabletop ■ Enables high-precision testing in compliance with ISO and JIS standards ■ No installation work required *For more details, please download the PDF or feel free to contact us.

  • 11-2.png
  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Mattress Durability Testing Machine 'HR-5512'

Mattress Durability Testing Machine 'HR-5512'

Dedicated for spring mattresses! A program to display the deflection amount of 8.1.2 is also available.

The "HR-5512" is a mattress durability testing machine according to JIS S1102:2004 branch number: 8.1.1. It is a product designed to verify the durability "sag amount" of spring mattresses used for sleeping in ordinary residential beds. A program is also available to calculate the test data and display the results (8.1.2 deflection amount). Please feel free to contact us when you need assistance. 【Features】 ■ Can be installed up to double size (abbreviation 14) (1400W x 1950L) ■ Dedicated to spring mattresses *For more details, please download the PDF or feel free to contact us.

  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Safety Shoe Impact Testing Machine 'HR-6117'

Safety Shoe Impact Testing Machine 'HR-6117'

It is possible to freely drop from a specified height along the vertical guide!

The HR-6117 is an impact testing machine for JIS T8101:2006 branch number: 9.1 a) impact testing machine and 9.8 a) toe protector impact testing machine. It can freely drop a steel striker with a mass of 20kg ± 0.2kg from a specified height along a vertical guide. Please feel free to contact us if you have any requests. 【Features】 ■ Comes with two types of steel strikers and a clamp fixture (fixed fixture) ■ Strikers and clamp fixtures are interchangeable *For more details, please download the PDF or feel free to contact us.

  • Impact Test
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
JIS K 6400 Repeated Compression Residual Strain Testing Machine 'HR-5509'

JIS K 6400 Repeated Compression Residual Strain Testing Machine 'HR-5509'

Measuring the residual strain of repeated compression specifically for soft foam materials (urethane foam)!

The HR-5509 is a testing machine for JIS K6400-4:2004 Branch number: 6.2.1 Repeated Compression Residual Strain Test Method B (Constant Displacement Method). The stroke adjustment range is 10mm to 100mm, and the specimen size is 50mm to 100mm in width and length. The number of tests is 80,000, and settings can be changed. Please feel free to contact us if you have any requests. 【Features】 ■ Repeated compression speed: 60 times/minute ■ Specimens of width and length: 50mm to 100mm can be installed (Up to 4 specimens of 100mm size can be installed) ■ Stroke adjustment range: 10mm to 100mm * For more details, please download the PDF or feel free to contact us.

  • 17-2.png
  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
JIS C 0920:2003 Sprinkler Test Machine 'HR-5124'

JIS C 0920:2003 Sprinkler Test Machine 'HR-5124'

Testing for IP×4 (splashing water) and IP×6 (jet water) is possible!

The "HR-5124" is a sprinkler test device that complies with JIS C 0920:200J3 branch number: 14.2.4 (IPx4) and 14.2.6 (IPx6). This product is designed to verify the performance of protection against water (IP code) and allows for the adjustment of the amount of water and water pressure. The range of sprinkler height is 1000 to 4000 mm, and the size of the test specimen that can be installed is approximately 1000 mm to 3000 mm in height. 【Features】 ■ Capable of testing IPx4 (water splashing) and IPx6 (jet spray) *For more details, please download the PDF or feel free to contact us.

  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
JIS S2010 Handle Strength Testing Machine (Tensile) 'HR-5011'

JIS S2010 Handle Strength Testing Machine (Tensile) 'HR-5011'

The tensile load is up to 200N! Testing is possible up to the maximum JIS standard of 39cm for the double-handled pot.

The "HR-5011" is a handle strength testing machine (tensile) for pots and frying pans, and kettles, according to JIS S2010:1997 branch numbers: 7.5.1 and 7.5.2. It can pull with a maximum force of 200N and can maintain the set force for one minute. It is compatible with both two-hand pots and one-hand pots, as well as kettle handles. 【Features】 ■ Capable of testing two-hand pots up to the maximum JIS standard of 39cm ■ Compatible with handles of two-hand pots, one-hand pots, and kettles *For more details, please download the PDF or feel free to contact us.

  • HR-5011 (2).png
  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
JIS K6400-3 Rebound Elasticity Testing Machine (Manual) 'HR-5513'

JIS K6400-3 Rebound Elasticity Testing Machine (Manual) 'HR-5513'

3.2 Soft foam material (sample) only! Scale markings will be made every 5% (25mm) around the entire circumference.

The "HR-5513" is a manual rebound elasticity testing machine according to JISK6400-3 5.2. It is designed specifically for measuring the rebound elasticity of soft foam materials (samples). Additionally, it has a mechanism to hold a steel ball specified in JIS B 1501 with a nominal diameter of 16mm and grade G40 (diameter 16±0.5mm, mass 16.8±1.5g) and allows the steel ball to drop without rotation onto the center of the test piece. 【Features】 ■ A vertical transparent tube with an inner diameter of 50mm ■ A measurement section for rebound height of 500mm ■ Graduations every 5% (25mm) around the entire circumference ■ Graduations every 1% over one-third of the entire circumference *For more details, please download the PDF or feel free to contact us.

  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
JIS S2010 Abrasion Resistance Testing Machine 'HR-6204'

JIS S2010 Abrasion Resistance Testing Machine 'HR-6204'

Rotating 3000 times at a speed of 40 times per minute! Suitable for containers with a diameter of φ160 to φ300.

The "HR-6204" is a wear resistance testing machine according to JIS S2010:2013 branch number: 8.3.4.5. To confirm the wear resistance of fluororesin coatings, the turner is operated for 3000 cycles at a speed of 40 times per minute, after which the condition of the coating surface is visually observed. This machine is used to check for the presence of exposed aluminum substrate. Additionally, the temperature of the coating surface is set at 200℃±5℃, with a speed of 40 times per minute and a stroke of approximately 50mm. 【Features】 ■ Containers with diameters from φ160 to φ300 can be installed (Nominal diameter 16cm to nominal diameter 30cm, height below 85mm) ■ The number of cycles can be changed *For more details, please download the PDF or feel free to contact us.

  • スクリーンショット 2025-04-15 113324.png
  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
JIS L4500 Automatic Measurement Rebound Elasticity Testing Machine 'HR-5830'

JIS L4500 Automatic Measurement Rebound Elasticity Testing Machine 'HR-5830'

The drop height is 250m! A gate-type testing machine that can drop straight down in the vertical direction.

The "HR-5830" is a rebound elasticity testing machine according to JIS L 4500:2020, branch number: 9.5.4. A drop unit is dropped from a specified height onto the test specimen, and the height to which the drop unit rebounds is measured. This testing machine is used to determine the rebound elasticity of three-dimensional mesh fiber structures. 【Features】 ■ Drop height: 250mm ■ Weight of drop unit: approximately 600g ± 10g ■ A gate type that allows for straight vertical dropping *For more details, please download the PDF or feel free to contact us.

  • Testing Equipment and Devices
  • Testing Machine

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Testing Machineに関連する検索キーワード

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.