We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Testing Machine.
ipros is IPROS GMS IPROS One of the largest technical database sites in Japan that collects information on.

Testing Machine×安田精機製作所 - List of Manufacturers, Suppliers, Companies and Products

Testing Machine Product List

46~60 item / All 62 items

Displayed results

517-L Dupont-style drop impact testing machine (with low temperature chamber)

It is a testing machine for evaluating the drop weight resistance of coatings and the point impact strength of plastic sheets in a low-temperature chamber.

- This is a testing machine for evaluating the impact resistance of paint films and the point impact strength of plastic sheets. - A test specimen with the painted surface facing up is placed between a striking mold with a certain curvature and a receiving base with a specific indentation, and a weight is dropped from a specified height onto the striking mold. - After removing the test specimen and leaving it in a room for one hour, the presence of cracks or peeling in the paint film due to impact deformation is examined. - The low-temperature chamber can be set to an environment of -35 to 60°C using a refrigeration unit. <Reference Standards> JIS-(K5400), K5600-5-3, ASTM-D2794 (Plastic), ISO-6272 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Impact Test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

553-T Pencil Scratch Hardness Tester

We will evaluate the pencil hardness of the coating film.

- This is a pencil scratch hardness tester used to evaluate the scratch hardness of coatings. - It is also used for the Clemens-type scratch hardness test of decorative boards and for evaluating the solvent resistance of enamel wires. - After attaching the specified pencil to the tester and balancing it, a specified weight is placed on it, and the handle is turned to scratch the coating at a 45° angle. - After the test, the indentation on the test piece is examined visually for evaluation, and the hardness value is determined by the density symbol of the hardest pencil that shows no signs of coating damage or scratches. <Reference Standards> JIS-(C3003), C3216-4, D0202, (K5400), K5600-5-4, K5651, K6894, K6902, ASTM-D2197, D3363, ISO-15184, IEC-60851-4 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

119-L-VR Demacha Bending Test Machine (with low-temperature chamber and image fracture detection function)

Equipped with image analysis capabilities using a super high-speed digital image camera!

- It is equipped with a high-speed digital imaging camera for specimen observation on a low-temperature bending test machine. - Since the occurrence and growth of cracks can be saved as images, there is no need to interrupt the test to check the condition of the specimen, allowing for efficient testing. <Reference Standards> JIS-K6260, ASTM-D813, BS-903, ISO-132 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other environmental analysis equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

541 Gardner-type sand abrasion testing machine

This is a testing machine for evaluating the wear resistance of surface-treated coatings such as painting and plating.

- This is a testing machine (wear testing device, sand falling wear testing device) used to evaluate the wear resistance of surface-treated coatings such as paint and plating. - The test specimen is mounted at a 45° angle to the vertical direction, and standard sand is dropped from a specified height with a defined drop amount. - The time until the coating is worn away and the substrate is exposed, as well as the amount of sand used, is measured, or the changes in thickness and mass of the test specimen before and after dropping a specified amount of sand are measured to calculate wear resistance. <Reference Standards> JIS-A1452, A5423, H8503, H8682-3, ASTM-D968 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

173-S Enamel Wire Softening Point Tester

This is a testing machine (softening test device) for conducting softening tests on enamel wire using the cross method.

- This is a testing machine (softening test device) for conducting softening tests on enamel wire using the cross method. - Two linear test specimens are inserted perpendicularly into a metal block heated to a desired temperature by electric heating. - A ceramic piston or steel ball is used at the intersection of the test specimens to apply a constant load from directly above, detecting softening short circuits at the intersection. - Equipped with a main leakage circuit breaker, overheating prevention function, and an insulated safety cover (to prevent finger pinching). <Reference Standard> C3216-6:2011 【Regarding Catalog Download】 Please request the catalog through the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

306-L FPC Bending Test Machine (with Low Temperature Chamber)

This is a testing machine for evaluating the bend resistance of plastic films and FPC (Flexible Printed Circuit Boards) in a low-temperature chamber ranging from -35 to 60 °C.

- This is a testing machine (bending resistance testing machine, flexible printed circuit board bending fatigue testing machine) used to evaluate the bending resistance of plastic films and FPCs (flexible printed circuit boards) in a low-temperature bath. - The test specimen is bent to a specified bending radius as defined in individual standards and fixed between parallel fixed and movable plates while current is passed through the specimen to prepare it for testing. - The movable plate is then moved back and forth at a specified speed to bend the test specimen, continuing until the current flowing through the specimen stops, at which point the number of bends is recorded. - The number of cycles is 4 cycles (2 simultaneous drives × 2). <Reference Standard> JIS-C5016 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

121-R Brittle Temperature Testing Machine (with Freezer)

Low temperature conditions with a freezer! Possible down to -70 degrees!

- This is a testing machine that applies impact bending to plastic and rubber materials under low-temperature conditions using a cantilever beam. - To create low-temperature conditions, a refrigeration unit is used instead of dry ice. - The test chamber filled with a heat transfer medium is cooled and prepared, and after immersing the fixed test specimen in the heat transfer medium for a specified time using a specimen gripping device (test specimen holder, sample holder), an impact is applied using a striking hammer. - The presence or absence of fractures in the test specimen is used to calculate the 50% impact embrittlement temperature and the impact embrittlement limit temperature. - With the optional use of liquid nitrogen, temperatures down to -100°C are possible. <Reference Standards> JIS-C3005, K6261, K6723, K7216, ASTM-D746, D2137, ISO-812, 974 【Regarding Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

145-L Low Temperature Elastic Recovery Testing Machine (TR Tester)

Measuring low-temperature elastic recovery of vulcanized rubber and thermoplastic rubber!

- This is a testing machine (TR tester) for measuring the low-temperature elastic recovery of vulcanized rubber and thermoplastic rubber. - The test specimen is elongated and fixed, then immersed in a test tank filled with a heat transfer medium, which is cooled to -70°C to -73°C and held for 10 minutes. After that, the fixation of the test specimen is released, and the test tank is heated at a rate of 1°C per minute. - The length of the test specimen is measured at -70°C and then at 2-minute intervals thereafter, continuing the test until the contraction rate of the test specimen reaches 75%. - From the test results, a temperature-contraction rate curve is created, and the temperatures at 10%, 30%, 50%, and 70% contraction are calculated. - With the optional shared liquid nitrogen, it is possible to reach -100°C. <Reference Standards> JIS-K6261-4, ASTM-D1329, ISO-2921 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products that do not have a standalone catalog, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

252-UL-1581 Wire Combustibility Testing Machine

A vertical burning test will be conducted to evaluate the flame resistance of wires, cables, or cords.

- It is a testing machine (combustion testing device) for conducting vertical combustion tests to evaluate the flame resistance of wires, cables, or cords. - This testing machine consists of a drafter, combustion device, and calibration device. - An indicator flag is attached to the test specimen and secured in the upper and lower chucks. - A burner with an adjusted flame is tilted at 20° to ignite the test specimen, and the ignition is repeated five times with 15 seconds of flame exposure followed by 15 seconds of flame cessation. The flame resistance is evaluated based on the degree of combustion of the indicator flag and the cotton placed underneath, as well as the flame combustion time of the test specimen. <Reference Standards> UL-1581, ASTM-D5025, D5207 [Regarding Catalog Download] Please request the catalog from the related links below or through inquiries. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

254 Plug Bending Test Machine

This is a testing machine (bending test device, cord bending test device) for conducting strength tests on the bending performance of the plug (cord extraction part) (cord extraction part bending test).

- This is a testing machine (bending test device, cable bending test device) for conducting strength tests on the bending performance of plugs (cable extraction parts). - A specified weight is suspended from a sample of appropriate length, and power is supplied. - The movable plate is reciprocated at a speed of 40 times per minute at angles of 60° to the left and right (counting each side as one time), and the evaluation of bending performance is conducted based on the breakage rate of the sample. - For PVC insulated cables, the weight is set to 0.5 kg, and the cable is bent to 90° to the left and right, performing bending movements at a speed of 60 times per minute, counting one complete bend at 180°. <Reference Standards> JIS-C3662-2, C8306, IEC-60227-2 【About Catalog Download】 Please request a catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

258-D/PC Impact Testing Machine

Charpy impact tests and Izod impact tests can be performed! Specifications can be configured with additional options.

- This is a pendulum-type impact testing machine suitable for plastic materials. - By exchanging the hammer and anvil, both Charpy impact tests and Izod impact tests can be conducted. - The test is performed by attaching the test specimen to the anvil and swinging down the hammer. - By equipping the testing machine with a rotary encoder, the angle of the hammer's swing can be automatically read, and the test results can be automatically calculated. - You can choose between a digital specification (touch panel, PC) that saves data or an analog specification with a scale dial and pointer, which calculates impact strength from the hammer's swing angle indicated on the scale. - For this product, the specifications are configured by adding options, including the hammer, to the basic main unit. 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

258-L Impact Testing Machine (with Low Temperature Chamber)

Pendulum impact testing machine with a low-temperature chamber! Test specimens can be mounted from the outside while the inner door is closed!

- This is a pendulum impact testing machine that conducts Charpy impact tests and Izod impact tests in a low-temperature chamber. - The low-temperature chamber has two doors, allowing test specimens to be mounted from the outside while the inner door is closed, thereby reducing temperature changes inside the chamber. <Reference Standards> JIS-K7110, K7111-1, ASTM-D256, D6110, ISO-179-1:2010, 180 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2.68 million universal impact testing machine

This is a pendulum impact testing machine that can conduct Charpy impact tests in ultra-low temperature environments (-70°C).

- It can automatically perform an impact test in one cycle. - A cycle test can be conducted in a short time of 15 seconds. - The Charpy impact test is performed by inputting test conditions from the touch panel. - By using a cassette, up to 210 test specimens can be set at once. - The automatic transfer device enables "efficient and accurate installation in a short time." - It excels in the ability to create low-temperature environments, allowing for quick testing at low cost. <Reference Standards> JIS-K7111, K7111-1, ASTM-D256, D6110, ISO-179, 180 [Regarding Catalog Download] Please request the catalog from the related links below or by contacting us. *For products without a standalone catalog, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

304 Mühlen high-pressure burst test machine

We evaluate the burst strength of paper and board, liners and cardboard, and rubber/plastic coated fabrics. There are two types available: touch panel and digital.

- This is a testing machine (Mullen high-pressure testing machine, Mullen type testing machine, Mullen burst strength testing machine, Mullen burst degree testing machine) for evaluating the burst strength of paper and board, liners and cardboard, and rubber/plastic coated fabrics. - There are two types available: touch panel type and digital type. - The test specimen is placed on an elastic rubber diaphragm and clamped together with a tightening plate. - Pressure is applied to the test specimen at a specified speed through the rubber diaphragm, and the pressure at which the specimen tears is read as the burst strength. - Two types of pressure gauges can be selected: 2.0, 4.5, or 7.0 MPa. - Depending on the thickness of the test specimen and the burst strength, low-pressure and high-pressure types can be selected. 304 Mullen high-pressure burst degree testing machine 305 Mullen low-pressure burst degree testing machine <Reference Standards> JIS-K6404-11, P8112, P8131, TAPPI-T403, T807, T810, ISO-2758, 2759 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

305 Mühlen low-pressure burst test machine

We evaluate the burst strength of paper and cardboard, liners and corrugated cardboard, and rubber and plastic coated fabrics. There are two types available: touch panel type and digital type.

- This is a testing machine (Mullen low-pressure testing machine, Mullen type testing machine, Mullen burst strength testing machine, Mullen burst degree testing machine) for evaluating the burst strength of paper and board, liners and cardboard, and rubber/plastic coated fabrics. - There are two types available: touch panel type and digital type. - The test specimen is placed on an elastic rubber diaphragm and clamped together with a tightening plate. - Pressure is applied to the test specimen at a specified speed through the rubber diaphragm, and the pressure at which the specimen ruptures is recorded as the burst strength. - Two types of pressure gauges can be selected: 2.0, 4.5, and 7.0 MPa. - Depending on the thickness of the test specimen and the burst strength, low-pressure and high-pressure types can be selected. 304 Mullen high-pressure burst degree testing machine 305 Mullen low-pressure burst degree testing machine <Reference Standards> JIS-K6404-11, P8112, P8131, TAPPI-T403, T807, T810, ISO-2758, 2759 【About Catalog Download】 Please request the catalog from the related links below or by contacting us. *For products without individual catalogs, please request the comprehensive catalog.

  • Testing Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Testing Machine