更新日： 集計期間:Sep 24, 2025～Oct 21, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Sep 24, 2025～Oct 21, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
更新日： 集計期間:Sep 24, 2025～Oct 21, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
676～690 件を表示 ／ 全 942 件
Antenna pole for installing antennas such as those for radios.
●AP-8 (AP8) is an antenna pole (7m) manufactured by Nippon Antenna. ●It is an antenna pole for mounting antennas such as radios. ●The length when extended is 7m, and it is a 4-section pole. ●Please use it in combination with the separately sold four-legged base holder (horse) BS-78 and wire rope (120M) SUS. *For more details, please feel free to contact us.*
Four-legged base holder made by Nippon Antenna.
● The BS-78 (BS78) is a four-legged base holder manufactured by Nippon Antenna. ● It can be combined with separately sold antenna poles AP-8 (7m), AP-10 (9m), AP-12 (10.9m), and AP-14 (12.8m). ● It is used in combination with antenna poles and stay wire ropes when installing antennas such as radios. ● When constructing with the AP antenna pole, if the installation of the BS-78 is unstable on the roof or similar locations, use the base pipe steering AS-63 and pre-tension the stay wire to secure it to the base pipe, allowing for safe pole extension work. *For more details, please feel free to contact us.*
A set of two rechargeable batteries WB-2000 for wireless microphones. Low self-discharge type nickel-metal hydride batteries that reduce environmental impact.
The WB-2000-2 (WB20002) is a rechargeable battery set (2 pieces) for wireless microphones manufactured by TOA Corporation. It contains two AA-sized nickel-metal hydride batteries (capacity 2000mAh) designed for wireless microphones. It uses a low self-discharge type nickel-metal hydride battery to reduce environmental impact. This battery is compatible with TOA models WM-D1210, WM-D1260, WM-D1310, WM-1420, WM-1100, WM-1120, WT-1100, WT-1101-C11C13, and WT-1101-C12C14. *For more details, please feel free to contact us.
A set of two rechargeable batteries WB-1000A for wireless microphones. Low self-discharge type nickel-metal hydride batteries that reduce environmental impact.
The WB-1000A-2 (WB1000A2) is a rechargeable battery set (2 pieces) for wireless microphones manufactured by TOA Corporation. It contains two AA nickel-metal hydride batteries (capacity 1000mAh) designed for wireless microphones. It uses low self-discharge type nickel-metal hydride batteries to reduce environmental impact. This battery is compatible with TOA models WM-D1210, WM-D1260, WM-D1310, WM-1420, WM-1100, WM-1120, WT-1100, WT-1101-C11C13, and WT-1101-C12C14. *For more details, please feel free to contact us.*
A whip antenna that is mounted by drilling with minimal adverse effects on the vehicle body.
The WH-450-1ND-09 (WH4501ND09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 400MHz band. It is an antenna for UHF radios. The compatible frequency range is 383.35 to 383.45MHz (receiving 399.0625 to 399.45MHz, transmitting 383.0625 to 383.45MHz). It is a whip antenna that requires hole-mount installation. Installation requires drilling. A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. This product has a mounting hole of φ16mm. It comes with an N-J connector, and the coaxial cable is sold separately. It is equipped with a ground wire, ensuring excellent electrical performance regardless of installation location, with minimal adverse effects from the vehicle body. It complies with safety standards. For more details, please feel free to contact us.
F-type antenna mounting bracket for installing a 5-element Yagi antenna in the 60MHz band.
The F-1 (Round) K2D (Set) is a mounting bracket for F-type antennas manufactured by Nippon Antenna. It is primarily used for mounting 5-element Yagi antennas in the 60 MHz band. It is installed in an arm shape. The compatible arm diameter for antennas is φ25 to φ38. The adjustable band compatible diameter range is φ300 to φ410, and the upper mast diameter range is φ300 to φ389. Antennas such as the 5-element Yagi antenna 5DV-0608 can be mounted. *For more details, please feel free to contact our company.*
Portable telescopic sky pole made by Nippon Antenna.
●C-SP-6 (CSP6) is a portable sky pole (telescopic) made by Nippon Antenna. ●It is an easily portable telescopic sky pole. ●The length is approximately 5.6m when extended and about 1.7m when shortened. ●It is used by attaching antennas for radios and other devices. *For more details, please feel free to contact our company.*
Portable telescopic sky pole made by Nippon Antenna.
●C-SP-10 (CSP10) is a portable sky pole (telescopic) made by Nippon Antenna. ●It is an easy-to-carry telescopic portable sky pole. ●The length is approximately 9.4m when extended and about 1.9m when shortened. ●It is used by attaching antennas for radios and other devices. *For more details, please feel free to contact our company.*
F-type antenna mounting bracket for installing a 60MHz band 3-element Yagi antenna.
The F-1 (Round) KD (Set) is a mounting bracket for F-type antennas manufactured by Nippon Antenna. It is primarily used for mounting 3-element Yagi antennas in the 60 MHz band. It is installed in an arm type configuration. The compatible arm diameter for antennas is φ25 to φ38. The range for the adjustable band is φ300 to φ410, and the upper mast diameter range is φ300 to φ389. Antennas such as the 260 MHz band wideband 8-element Yagi antenna 8BD-2502 can be mounted. For more details, please feel free to contact our company.
A 3-element Yagi antenna for municipal disaster prevention administrative radio that can be used for both transmission and reception.
The 3DV-0608A (3DV0608A) is a 60MHz band 3-element Yagi antenna manufactured by Nippon Antenna. * The Yagi antenna is a type of antenna consisting of three rods of different lengths, functioning as a director, driven element, and reflector, which provides high directivity. It was invented in 1926. * This is a 3-element Yagi antenna suitable for both transmission and reception, designed for municipal disaster prevention administrative radio use. * It is a typical unidirectional antenna mainly composed of an antenna, reflector element, and director element. * The appearance is simple, with the supply section and element blanket molded from reinforced resin. * It operates at a specified frequency within the 54-75MHz range, with model numbers varying by frequency band. - 3DV-0608A 55-66MHz - 3DV-0608A 68.2-69.8MHz Additionally, please specify the center frequency (fo) in MHz when placing your order. * The connector is NJ. * The compatible antenna mounting bracket is F-1 (round)-K(D). * For more details, please feel free to contact us.
A 3-element Yagi antenna for municipal disaster prevention administrative radio that can be used for both transmission and reception.
The 3DV-0608 (3DV0608) is a 60MHz band 3-element Yagi antenna manufactured by Nippon Antenna. *The Yagi antenna is a type of antenna consisting of three rods of different lengths, where the shorter rod acts as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *This is a 3-element Yagi antenna suitable for both transmission and reception, designed for municipal disaster prevention administrative radio communications. It is an antenna for radio equipment operating in the 60MHz band. *It operates at a specified frequency within the range of 54-75MHz. The model number changes depending on the frequency band. - 3DV-0608 55-66MHz - 3DV-0608 68.2-69.8MHz When placing an order, please specify the center frequency (fo) in MHz. *It is a typical unidirectional antenna primarily composed of an antenna, reflector element, and director element. *The appearance is simple, and the supply section and element blanket are molded with reinforced resin. *The connector is NJ. *The compatible antenna mounting brackets are C-31(B) and C-19(C). *For more details, please feel free to contact us.
Ear-hook type earphones with a microphone that are hard to fall out.
The EX-M210 (EXM210) is an ear-hook type earphone microphone manufactured by Exseli (EXSELI). It can be used with specific low-power transceivers and digital simple radios that have a 1-pin screw-in connector from Standard, Yaesu Musen, Alinco, and Icom. *Please note that it may not be compatible with some models. Please specify the model you intend to use when considering a purchase. It features a tie-pin type microphone with a clip that can be attached to your chest. It comes with an ear hook that makes it difficult to fall off from your ear. It can be used in both ears. The cable for the earphone part is made of a durable, stretchable coiled cord that is resistant to breakage. *For more details, please feel free to contact us.
A single directional 400MHz band 3-element Yagi antenna composed of an antenna, reflector element, and director element.
The 3DV-450 (3DV450) is a 400MHz band 3-element Yagi antenna manufactured by Nippon Antenna. *The Yagi antenna is a type of antenna consisting of three rods of different lengths, functioning as a director, driven element, and reflector, which provides high directivity. It was invented in 1926. *It is primarily a single-directional fixed station radio antenna composed of an antenna, reflector element, and director element. *It operates at a specified frequency within the range of 340 to 480MHz. The model number changes depending on the operating frequency. - 340 to 390MHz: 3DV-450 F=340-390 - 390 to 480MHz: 3DV-450 F=390-480 *Please specify the center frequency (fo/MHz) when placing your order. *The supply section and element blanket are molded with reinforced resin. *Due to its protruding type, it can be mounted with rear support. *The recommended mounting brackets for the antenna are C-14 or C-19(D). *For more details, please feel free to contact us.
Single-directional 400MHz band 8-element Yagi antenna composed of an antenna, reflecting elements, and guiding elements.
The 8DV-450 (8DV450) is a 400MHz band 8-element Yagi antenna manufactured by Nippon Antenna. *The Yagi antenna is a type of antenna consisting of three rods of different lengths, which function as a director, driven element, and reflector, resulting in a highly directional antenna. It was invented in 1926. *It is primarily a single-directional fixed station radio antenna composed of an antenna, reflector elements, and guiding elements. *It operates at a specified frequency within the range of 340 to 480MHz. The model number changes based on the operating frequency. - 340-390MHz: 8DV-450 F=340-390 City - 390-480MHz: 8DV-450 F=390-480 City *Please specify the center frequency (fo/MHz) when placing your order. *The supply part and element blanket are molded with reinforced resin. *Due to its protruding type, it can be mounted with rear support. *The recommended mounting bracket for the antenna is C-36(G). *For more details, please feel free to contact us.
Single directional 400MHz band 14-element Yagi antenna composed of an antenna, reflecting elements, and guiding elements.
The 14DV-450 (12DV450) is a 14-element Yagi antenna manufactured by Nippon Antenna for the 400 MHz band. * The Yagi antenna consists of three rods of different lengths forming a single antenna, with the shorter rod serving as the director, the radiating element, and the reflector, making it a highly directional antenna. It was invented in 1926. * It is primarily an antenna for fixed station radios with a single directional pattern, composed mainly of the antenna, reflector elements, and director elements. * It operates at a specified frequency within the range of 340 to 480 MHz. Please specify the center frequency (fo/MHz) when placing your order. * The supply section and element blanket are molded with reinforced resin. * Due to its protruding type, it can be mounted with rear support. * The recommended mounting bracket for the antenna is F-26 (B2). * For more details, please feel free to contact us.
