Last Updated： Aggregation Period:Jun 17, 2026～Jul 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 17, 2026～Jul 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 17, 2026～Jul 14, 2026
This ranking is based on the number of page views on our site.
121～150 item / All 353 items
Temperature and Humidity / Dew Point Transmitter (0-20mA) Cable Probe / Model Number MC8VAC40-N17TC2S
■High cost-performance transmitter with excellent long-term stability ■0/4–20mA/0–10V/RS485 Modbus-RTU/Relay output ■Front blind plate (standard) or LCD display option ■Three types of probe shapes available: downward, rear, and separated
Micro Particle Measurement PM2.5 Transmitter (RS485 Output) / Model Number MC8PM-1M
● Continuous measurement of air quality changes in the atmosphere, equipped with an alarm function ● Accurate, maintenance-free detection of PM2.5, PM1.0, and PM10 ● Smart, compact, low power consumption, multi-purpose ● Data utilization on the cloud possible in combination with Delta Ohm loggers ● Configurable measurement intervals extend sensor lifespan ● High cost performance and reliability
Supply voltage DC 8-35V, current consumption <4mA, suitable for battery and solar panel power applications, analog output is 4-20mA.
PBS860/880 is an analog output transmitter for atmospheric pressure measurement. By adopting a piezoresistive element, it enables extremely high precision and stable measurement of atmospheric pressure. It also excels in long-term reproducibility, has low hysteresis, and maintains stable performance against temperature changes. Depending on the model, it converts to a linear analog output of either voltage or current. It is also equipped with a potentiometer for offset (zero) adjustment.
It is possible to additionally equip analog output 2 for temperature and relative humidity or dew point temperature as an option.
The MC8EVS-71M00S series is an environmental measurement transmitter that outputs temperature, relative humidity, and atmospheric pressure (optional) via RS485 Modbus-RTU.
High-precision yet groundbreaking price atmospheric pressure transmitter.
PBS860/880 is an analog output transmitter for atmospheric pressure measurement. By adopting a piezoresistive element, it enables extremely high precision and stable measurement of atmospheric pressure. It also excels in long-term reproducibility, has low hysteresis, and maintains stable performance against temperature changes. Depending on the model, it converts to a linear analog output of voltage or current. It is also equipped with a potentiometer for offset (zero) adjustment. ▲ Supply voltage DC 8–35V, current consumption <4mA ▲ Suitable for battery and solar panel power applications, with analog output options of 4–20mA, 0–1/0–5/0–10/1–5V.
pH transmitter that achieves both high precision and reliability.
pH transmitter that converts the output from a pH electrode or Redox electrode into a temperature-compensated 4-20mA analog signal, insulated from the electrode's input circuit. The LCD display can show the process signal values and various parameters. High-quality product design and the use of selected components enable long-term, high-precision, and reliable measurements. It can be used in combination with separately sold pH electrodes or Redox electrodes and a temperature probe (Pt100Ω/0°C). ▼ DC 4-20mA output pH meter ▼ Relay output (delay setting available)
High-precision high-speed response ultra-compact relative humidity and temperature transmitter
The HD9817T series is a relative humidity and temperature transmitter that can be used in various applications such as HVAC-R, environmental monitoring, chemical storage, food transportation, greenhouse automation, and more. It is housed in an AISI304 stainless steel casing with an IP65 protection rating, making it suitable for use in harsh environmental conditions. Additionally, its ultra-compact size (φ14×138mm) and two output types (0-1V analog output, RS232C output) make it ideal for integration into various host devices. The HD9817T series allows for reading measurements and calibrating the relative humidity sensor using the HD9817TC software (available for download from this site). ▼ High-precision capacitive sensor, Pt100 sensor with accuracy class 1/3DIN ▼ Output options include 0-1V and RS232C ▼ Durable AISI304 stainless steel housing ▼ Compact size of φ14×138mm, perfect for embedded applications
High-precision and reliable pH transmitter.
The output from the pH electrode or Redox electrode is temperature-compensated and converted into an insulated 4-20mA analog signal from the electrode input circuit. The analog output is single-point, allowing for the selection of either pH or Redox output, and scaling is also possible. In addition to the analog output, it features two relay outputs with a delay setting of up to 255 seconds. The large LCD on the front displays temperature on the top line and either pH or Redox values on the bottom line, showing the set parameters during configuration. The DO9765TR and DO9785TR enable high-precision and reliable measurements over an extended period due to high-quality product design and the use of carefully selected components. They are used in combination with separately sold pH electrodes or Redox electrodes and a temperature probe (Pt100Ω/0℃). ▼ DC 4-20mA output pH meter ▼ Relay output (delay setting available)
High-precision atmospheric pressure transmitter for gauge micro-pressure and micro-differential pressure measurement.
■Atmospheric pressure transmitter that measures gauge pressure or gauge differential pressure in the range of 10hPa to 200hPa and converts it to an analog output of current or voltage. ■Suitable for any application involving non-corrosive air or gas. ■Enables extremely high accuracy and stability in atmospheric pressure measurement thanks to the built-in piezoresistive sensor. It exhibits low hysteresis and excellent performance in reproducibility and temperature characteristics. ■All models are factory calibrated for accuracy before shipment, allowing for immediate installation and use. ▼Two types of output: 4-20mA (HD408T) / 0-10V (HD4V8T) ▼For gauge micro-pressure/micro-differential pressure monitoring in the measurement range of 10hPa to 200hPa ▼Extremely high measurement accuracy and long-term stability with piezoresistive sensor ▼Low hysteresis with excellent measurement reproducibility and temperature characteristics ▼Compact size (66×60×35mm) allows for installation in narrow spaces
NDIR method high-precision CO2 and temperature transmitter
■ High-precision measurement of CO2 using the latest NDIR (non-dispersive infrared absorption) technology ■ Five types of CO2 concentration measurement ranges available ■ Maintenance interval exceeds 5 years ■ Equipped with a serial communication port for connection to a PC or GSM module ■ Standard analog output with 2 channels (mV/mA), optional relay output also available ■ Optional local network communication via RS485 or LonWorksTM ■ 2-channel logger function (optional)
Achieving high stability and accuracy in CO2 concentration measurement! Maintenance-free, compact, and low-cost CO2 concentration transmitter.
This is a lightweight, compact, maintenance-free, low-cost general-purpose CO2 concentration transmitter that adopts the latest NDIR method. We offer a lineup of CO2-specific "eSENSE" and CO2 + temperature measurement capable "aSENSE." It accurately measures CO2 concentrations in residential environments primarily in the range of 0-2000 ppm or 0-3000 ppm, providing either analog or digital output. The Senseair NDIR method CO2 sensor boasts a cumulative production of over several million units and has been installed in numerous renowned buildings and facilities in Europe and the United States, including the European Parliament, the Kremlin, and Heathrow Airport, many of which are still in operation today. ◆ Indoor CO2 Transmitter Lineup ◆ eSENSE: No display eSENSE-Disp: With display eSENSE-TR: No display, terminals for resistive temperature probe aSENSE: No display aSENSE-Disp: With display aSENSE-RL: No display, relay output aSENSE-Disp-RL: With display, relay output aSENSE-Ind-Disp-RL: With display, relay output, protection rating IP54
The detected value is converted into two analog output signals! Flexibly accommodates various ventilation control methods.
The "aSENSE" is a high-performance transmitter designed for installation in general residential environments, capable of measuring CO2 concentration and temperature. It is available with both an LCD display and without a display, making it suitable for installation in general residential environments and ventilation ducts. It is designed to control ventilation and can be flexibly adapted to various ventilation control methods. Data is transmitted to a BMS system or controller and can be configured via the software UIP. 【Features】 ■ Maintenance-free in typical applications ■ Built-in automatic self-diagnostic function ■ Standard analog output with 2 terminals (V/mA) ■ Optional relay output *For more details, please refer to the PDF materials or feel free to contact us.
A variety of housing shapes! High cost-performance sensor solutions.
The "eSENSE Duct" is a maintenance-free, NDIR-type CO2 concentration transmitter designed for installation in ventilation ducts. By controlling ventilation based on actual demand, it reduces power consumption while creating a healthy indoor environment. This product offers a highly cost-effective sensor solution for building air conditioning and other environments. 【Features】 ■ Dual analog output ■ Built-in automatic self-diagnosis function ■ Maintenance-free under normal use ■ High cost performance through connection to DDC ■ Optional integration of temperature passive elements (Tr model) ■ Variety of housing shapes available *For more details, please refer to the PDF materials or feel free to contact us.
Atmospheric pressure transmitter using temperature-compensated piezo sensor.
The measurements of atmospheric pressure and corrected temperature are digitally processed, allowing for highly accurate atmospheric pressure output values across the entire operating temperature range of the transmitter. The atmospheric pressure transmitter is factory calibrated at multiple points, ensuring excellent long-term stability and reproducibility. It comes standard with RS485 digital output using Modbus-RTU or proprietary protocol, and in addition, the following analog outputs can be selected as options: ● Current output of 0/4–20mA ● Voltage output of 0–1V, 0–5V, or 0–10V [Features] ▲ High-precision measurements using a piezoresistive sensor with an integrated temperature sensor for compensation ▲ Capability to measure atmospheric pressure, temperature, and humidity with an optional temperature and humidity probe ▲ Modbus-RTU output is standard across all models, with optional voltage/current analog outputs ▲ Long-distance data transmission and networking possible via digital output
Small high-precision temperature/relative humidity/atmospheric pressure (optional) transmitter
The ENVIROsense series is an environmental measurement transmitter that outputs temperature, relative humidity, and atmospheric pressure (optional) via RS485 Modbus-RTU. It is possible to additionally equip it with two analog outputs for temperature and relative humidity or dew point temperature as an option. There are three models available to suit different applications. ETS60: A cost-effective model for indoor HVAC applications (accuracy ±1.8%RH) ETS68: A high-precision model for clean room applications (accuracy ±1.2%RH) ETS80: A meteorological measurement model with a coating resistant to condensation, contaminants, and salt on the sensor (accuracy ±1.5%RH) With the installation of the protection hood HD9007A-1/2, it can also be used outdoors. All models can obtain the following humidity-related calculated physical quantities: Dew point temperature Water vapor partial pressure Wet bulb temperature Specific humidity Absolute humidity Frost point temperature Mixing ratio Saturation vapor pressure relative to water surface Specific enthalpy Saturation vapor pressure relative to ice surface
Microprocessor-controlled temperature transmitter
■HD9008.T7AC outputs DC4–20mA instrumentation signals, while HD9008.T7S outputs measured temperature values via RS485 Modbus-RTU. ■Despite its compact cylindrical size (φ26×225mm), it incorporates an amplifier and converter. ■HD9008.T7AC allows for scaling of the temperature range against the output. ■HD9008.03 directly outputs the resistance value of a platinum resistance thermometer Pt100. ■For outdoor use, the transmitter should be inserted into a protection hood HD9007A-1 (12 layers) or HD9007A-2 (16 layers) to protect it from sunlight and rain. ■For indoor installation, probe holders HD9008.21.1 (wall distance 250mm) and HD9008.21.2 (wall distance 125mm) are available. ■Protection rating: IP65. ▼Temperature scaling is possible for 4–20mA output (HD9008.T7AC). ▼General-purpose Modbus-RTU output in the PV industry (HD9008.T7S). ▼3-wire Pt100 (Class A) direct output (HD9008.03). ▼Options for outdoor protection hood and indoor holder.
Temperature transmitter for Pt100 sensor input, DC 4-20mA output.
■ Converts the measurement input of a standard Pt100 sensor (100Ω/0℃) to a 2-wire linear 4-20mA current signal ■ Achieves high accuracy and stability through digital linearization technology ■ The scaling for the temperature range corresponding to 4-20mA can be freely set within the range of -200 to +650℃ (minimum span 25℃) (The factory default setting is 4-20mA = 0-100℃) ■ A red LED inside the transmitter warns of abnormal conditions during setup (temperature outside the set range, sensor disconnection or short circuit) ■ Equipped with reverse polarity protection circuit ▲ For Pt100 sensor input, measurement range -200 to +650℃, scalable ▲ Built-in Pt100 sensor (HD786TR1/TR2) ▲ All models have DC 4-20mA output ▲ Standalone, wall-mounted, and DIN rail-mounted types
In HVAC/BEMS, the control of air velocity involves air velocity, temperature, and humidity transmitters.
HD2903T･HD29V3T: Wind Speed HD2937T･HD29V37T: Wind Speed・Temperature HD29371T･HD29V371T: Wind Speed・Temperature・Humidity ■ Used for wind speed control in HVAC/BEMS applications ■ Ensures accurate and reliable continuous measurements through selected sensor elements and electronics ■ Capable of use in harsh applications with thin-film sensors for wind speed, AISI304 probe sheath, and 20μ metal filter for relative humidity ■ Analog output options of 4–20mA and 0–10V, with wind speed measurement range and response speed (Fast/Slow) selectable by the user ■ Available in two types: "TO type" with the probe joined at a right angle to the back of the main case, and "TC type" connected to the main case via a cable ▲ Analog output DC4–20mA or DC0–10V ▲ Switchable wind speed range and response time (FAST/SLOW) ▲ Back-mounted/separated probe ▲ AISI304 sheath, IP67
DC4-20mA output, thermocouple (K, J, T, N) temperature transmitter
▲Thermocouple input scaling available ▲DIN rail mountable ▲RS232C, PC control, free software ●A two-wire, 4-20mA output temperature transmitter capable of scaling for K, J, T, and N type thermocouple inputs ●Converts voltage signals from thermocouples into a linear 4-20mA analog output signal ●Achieves excellent accuracy and stability through the use of digital devices ●The temperature range corresponding to the 4-20mA (or 20-4mA) output can be freely scaled within the measurement range of each thermocouple (minimum span is 50°C) ●The range and type of thermocouples can be easily set using dip switches ●The transmitter is equipped with an LED to warn of alarm conditions (such as sensor connection failures) during setting operations ●Reverse polarity protection function included
High cost-performance transmitter with excellent long-term stability.
▲0/4～20mA/0～10V/RS485 Modbus-RTU/Relay output ▲Front blind plate (standard) or LCD display option ▲Three types of probe shapes available: downward, rear, and separated ●Designed and developed based on 40 years of experience from Senseka (formerly Delta Ohm), pursuing accuracy, stability, simple installation and operability, and flexible communication connectivity, this humidity, temperature, and dew point temperature transmitter and hygrostat is built for long-term use. ●In addition to 0/4–20mA and 0–10V analog outputs, and RS485 Modbus-RTU, there is also a model with SPDT relay output for external device control. ●Probe shapes can be selected from rear probe, downward probe, and cable-attached separated probe. ●In addition to the standard model with a blind plate on the front, all models have an LCD display option.
Pressure transmitter suitable for measuring gauge pressure or differential pressure from full scale 50 Pa to 200 kPa.
- Uses a silicon-type piezoelectric pressure sensor equipped with high-precision temperature compensation, excellent linearity, reproducibility, and long-term stability. - The sensor's output signal is converted to the following output signals depending on the model: [HD402T] Voltage DC 0-10V or active type current 0/4-20mA output [HD402AT] 2-wire (current loop) 4-20mA output [HD402ST] RS485 Modbus-RTU output - The current output signal is resistant to interference from noise and can be transmitted over long distances. - In addition to full scale (F.S.), it is also possible to set the measurement range for positive scale (0 to +F.S.) or positive-negative scale (-F.S. to 0 to +F.S.). - Settings can be made using dip switches mounted on the PCB or by connecting a serial port to a PC. - An option with an LCD display capable of 4-digit display is available. ▲ DC 0-10V/4(0)-20mA/RS485 Modbus-RTU output ▲ Measurement units (Pa/kPa/hPa (mbar)), and full scale (large, medium, small) settings are possible. ▲ Settings for positive (0 to +FS) and positive-negative scale (-FS to 0 to +FS) are possible.
A transmitter for fine particulate matter that continuously measures changes in air quality and is equipped with an alarm function.
■Accurate measurement of PM2.5, PM1.0, and PM10. Maintenance-free detection ■Smart, compact, low power consumption, multi-purpose ■Data utilization on the cloud possible in combination with Sensirion loggers ■Configurable measurement intervals extend sensor lifespan ■High cost performance and reliability
It is possible to additionally equip analog output 2 for temperature and relative humidity or dew point temperature as an option!
The "ENVIROsense series" is an environmental measurement transmitter that outputs temperature, relative humidity, and atmospheric pressure (optional) via RS485 Modbus-RTU. Two models are available to suit different applications. The "ETS68" is designed for clean room applications where high precision is required, while the "ETS80" is designed for meteorological measurement applications with sensors coated to resist condensation, contamination, and salt. 【Features】 ■ A wide variety of specifications tailored to different applications ■ RS485 output standard on all models, with optional analog output for temperature and humidity ■ High-precision measurement using a piezoresistive atmospheric pressure sensor (optional) ■ Capable of obtaining various derived physical quantities related to humidity ■ Compliant with ISO17025 ACCREDIA (equivalent to IAJapan) calibration certification *For more details, please download the PDF or feel free to contact us.
Equipped with standard Modbus-RTU or proprietary protocol RS485 digital output!
The "PBS83M series" is an atmospheric pressure transmitter that employs a piezoresistive sensor with a built-in temperature sensor for compensation. The measurements of atmospheric pressure and compensation temperature are digitally processed, allowing for highly accurate atmospheric pressure output values across the entire operating temperature range of the transmitter. The atmospheric pressure transmitter is factory calibrated at multiple points, ensuring excellent long-term stability and reproducibility. 【Features】 ■ High-precision measurement using a piezoresistive sensor with a built-in temperature sensor for compensation ■ Capability to measure atmospheric pressure, temperature, and humidity with an optional temperature and humidity probe ■ Modbus-RTU output is standard on all models, with optional voltage/current analog output ■ Long-distance data transmission and networking possible via digital output *For more details, please download the PDF or feel free to contact us.
The embedded housing features a special design that particularly considers ease of cleaning!
The "HD50CR" is a data logger/transmitter that records measurement values outside the specified range and provides suitable evidence from a quality control perspective. It has been specifically developed for clean room applications. For specific FDA regulations applicable in the pharmaceutical industry, we have prepared an optional module to fully comply the standard software HD35AP-S and HDServer1 with FDA 21 CFR part 11. 【Features】 ■ Semi-permanent accuracy and stability: Low-pressure sensor with auto-zero function ■ Diverse connectivity: Analog/Modbus-RTU/Ethernet output ■ Can be used as a standalone: Direct access to the built-in server ■ Immediate alarms: Direct alarm issuance when thresholds are exceeded ■ Rich visibility: PC/Cloud/Local server/E-mail ■ Wide applications: FDA 21 CFR part 11 compliant software (optional) *For more details, please download the PDF or feel free to contact us.
2-wire loop type high-temperature capacitive hygrometer
High-temperature capacitive humidity meter of the 2-wire loop type transmitter. The body is robust and can be directly inserted into high-temperature processes up to 150°C, with explosion-proof options available. Probe lengths of 9' and 16' are selectable, and by attaching an optional display, it is possible to check the indicated values in the field. *For more details, please refer to the documentation or feel free to contact us. Please note that personal information registered with Ipros may be shared with and contacted by our authorized distributors. Thank you for your understanding.
Continuous measurement of moisture and oxygen in hydrogen is ideal! A single sensor can simultaneously measure moisture, temperature, and pressure! Wide measurement range, high sensitivity, and high stability.
The HygroPro moisture meter transmitter is a compact, loop-powered moisture meter transmitter that meets the demands of rigorous industrial applications with intrinsic safety and explosion-proof features. *For more details, please refer to the documentation or feel free to contact us. Please note that personal information registered with Ipros may be shared with and contacted by our authorized distributors. Thank you for your understanding.*
Achieve reduced installation space! Useful for ballast water treatment systems and large ship engines!
The "KH54" is a marine pressure transmitter that has obtained ship classification standards (NK) and is compact and lightweight (approximately 120g). The semiconductor deposition type (SS) sensor uses SUS316L as the standard diaphragm material, which has high breaking strength and excellent durability. It can be used in ballast water treatment systems and large ship engines. 【Features】 ■ Standard diaphragm material is SUS316L ■ Obtained NK standards ■ Complies with CE marking ■ RoHS compliant ■ Compact and lightweight size (approximately 120g) *For more details, please refer to the PDF document or feel free to contact us.
AVLINK, AV over IP SDVoE standard HDMI transmitter IPS-TC (copper cable)
Features ■ IP transmission of 4K/60Hz 4:4:4 video signals over a 10-gigabit network ■ Transmitter (encoder) with standard Cat 6a cable connection, maximum distance of 100m ■ Supports HDMI 2.0 and DisplayPort 1.2 inputs ■ Preview function for input sources ■ OSD (On-Screen Display) ■ Extends video, audio, IR, RS-232, and USB across the network ■ Seamless switching and zero latency ■ Video mode support - matrix switch, multi-view display, video wall, KVM ■ System configuration via an intuitive web-based GUI through IPS-M (controller) ■ NETGEAR certified. Recommended switches: M4300 and M4500 series
AVLINK, AV over IP SDVoE standard HDMI transmitter IPS-TF (fiber cable)
Features ■ IP transmission of 4K/60Hz 4:4:4 video signals over a 10-gigabit network ■ Transmitter (encoder), fiber connection, up to 10KM distance ■ Supports HDMI 2.0 and DisplayPort 1.2 inputs ■ Preview function for input sources ■ OSD (On-Screen Display) ■ KVM networking - comprehensive networking extension for video, audio, IR, RS-232, and USB ■ Seamless switching and zero latency ■ Supported video modes - matrix switch, multi-view display, video wall, KVM ■ Intuitive Web-GUI for system configuration ■ NETGEAR certified. Recommended switches: M4300 and M4500 series
