Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.
211～231 item / All 231 items
Introduction of sample pre-treatment products! Available in two options: 500mg and 1000mg.
We would like to introduce the 'Bond Elut NH2' that we handle. It is a sample preparation product, available in two options: "500mg, 100 pieces" and "1000mg, 100 pieces." Please feel free to contact us if you would like to place an order. *For more details, please refer to the PDF document or feel free to contact us.
Ultra-fine pore silica of SPEC
By increasing the surface area, we enhance the opportunities for adsorption and distribution between the analyte and functional groups, thereby improving efficiency. SPEC demonstrates very stable reproducibility and high flow characteristics even when processing high-viscosity or multi-particle samples. As a result, it enables high reproducibility of recovery rates and rapid operations, allowing for trouble-free automation. Additionally, since each of the 96 wells flows at a uniform flow rate without fluctuations, the variability in recovery rates for each well can be kept very low. Most types of packed SPE require 500 to 1000 μL of elution solvent. When analyzing with LC/MS/MS after processing, further operations such as evaporation and re-dissolution are necessary to achieve the required sensitivity. In the case of SPEC, substances retained in the porous surface can be eluted with only about 75 μL of solvent. By eluting with a minimal amount of solvent, the target substances are highly concentrated, allowing for direct injection into LC/MS/MS, which contributes to saving time and solvent volume, and improving productivity. *For more details, please refer to the PDF document or feel free to contact us.*
Reduce surface area and prioritize cost! Provides excellent flux density and low protein binding - Polyether sulfone GWPES series.
The "GWPES Series" is a high-purity, drinking water-grade polyethersulfone filter cartridge that maximizes the use of the entire surface area. As a cost-effective general-purpose membrane filtration solution, it reduces surface area and emphasizes cost. The highly retentive polyethersulfone membrane provides excellent flux density and low protein binding. Additionally, it is designed to withstand repeated hot water sanitization and in-situ steam sterilization cycles. 【Features】 ■ Cost-effective general-purpose membrane filtration ■ Reduced surface area with a focus on cost ■ Highly retentive polyethersulfone membrane ■ Provides excellent flux density and low protein binding ■ Manufactured in a cleanroom environment *For more details, please refer to the PDF document or feel free to contact us.
Ideal for the filtration sterilization of a wide range of liquids, including biopharmaceuticals, vaccines, buffer biological drugs, cell culture media, and difficult-to-filter eye drops!
Supor(R) EKV is a 0.2 μm filter sterilization filter ideal for cost-effective filtration sterilization, such as for filtering buffers and media. It features a special two-layer structure to enhance protective effects, allowing for efficient and economical filtration. Additionally, the use of hydrophilic polyethersulfone (PES) membranes results in very low adsorption of proteins and preservatives, which contributes to a high recovery rate of target substances. 【Features】 - Excellent flow characteristics with a wide membrane area due to the ultra-pleated structure [U.S. Patent No. 5543047] - Two-layer structure combined with an asymmetric pre-layer to maximize protective effects - Low adsorption performance and broad chemical resistance - Improved differential pressure during SIP compared to conventional products *For more details, please refer to the PDF document or feel free to contact us.
Ideal for final filtration sterilization of fluids prone to clogging, purification processes, and filtration sterilization of formulations including liposomes and emulsions!
The Fluorodyne® EX EDF filter features a unique hybrid membrane structure that demonstrates excellent filtration and sterilization performance even for fluids that are prone to clogging in conventional filtration sterilization filters. This filter can be steam sterilized whether the cartridge is dry or wet. It has a laid-over pleat structure and incorporates cutting-edge technologies such as asymmetric PES membranes, making it suitable for purification processes after clarification and for filtering formulations that include liposomes and emulsions. **Features** - Excellent flow characteristics due to ultra-pleat structure technology and narrow core design, providing a large membrane area. - High particle capture capacity and long life due to a two-layer structure combining mach V technology's polyethersulfone (PES) pre-layer and hydrophilic PVDF final layer. - Low adsorption characteristics and broad chemical resistance. - Low extractables. - Design allows for SIP (Steam-In-Place) whether the cartridge is dry or wet, among others. *For more details, please refer to the PDF documentation or feel free to contact us.*
Ideal for a wide range of filtration sterilization of pharmaceuticals, vaccines, biological drugs, cell culture media, and difficult-to-filter eye drops!
Supor(R) EBV is a sterilizing filter with a pore size of 0.2 μm. It features a special two-layer structure to enhance protective effects, allowing for efficient and economical filtration. Additionally, the use of hydrophilic polyethersulfone (PES) membranes results in very low adsorption of proteins and preservatives, which is also characterized by a high recovery rate of the target substances. 【Features】 - Excellent flow characteristics with a wide membrane area due to the ultra-pleated structure [U.S. Patent No. 5543047]. - Adoption of a two-layer structure combined with an asymmetric pre-layer to maximize protective effects. - Low adsorption performance and broad chemical resistance. - Improved differential pressure during SIP compared to conventional products. - Enhanced cumulative sterilization time by autoclaving compared to conventional products. *For more details, please refer to the PDF document or feel free to contact us.
![[Market Report] Single-Use Bioprocessing Market](https://image.mono.ipros.com/public/product/image/a76/2000971795/IPROS32436690193769079380.jpeg?w=280&h=280)
Revolutionizing the bioprocess: The global single-use bioprocessing market is experiencing remarkable growth.
The global bioprocess landscape is undergoing transformation due to the rapid rise of the single-use bioprocessing market. In 2022, this market emerged as a formidable force, boasting a size of 9.81 billion USD. Moving forward, the market is expected to accelerate its growth trajectory, generating an astonishing revenue of 44.87 billion USD by 2031. This surge indicates a robust compound annual growth rate (CAGR) of 18.4% during the forecast period from 2023 to 2031. The adoption of single-use bioprocessing solutions signifies a crucial paradigm shift in the biopharmaceutical and biotechnology industries. These solutions offer streamlined processes, enhanced flexibility, and reduced contamination risks, making them an attractive proposition for both manufacturers and researchers. For application methods, please check the [PDF download] button or apply directly through the related links.
Dehydration of sludge with a moisture content of 50-80 wt% is possible without the addition of a coagulant! The SS of the filtered water is achieved at less than 1 mg/L!
The Yuasa backwash-type flat membrane system is a device that forms a sludge cake layer on the surface of the flat membrane through suction filtration and detaches and collects the cake through backwashing. It can be used for the recovery of silicon polishing powder, rare metals, and other inorganic SS. It enables sludge dewatering with a moisture content of 50-80 wt% without the use of coagulants, and by employing a membrane with a nominal pore size of 0.25 μm, it achieves SS levels in the filtrate of less than 1 mg/L! ★ Free evaluation test campaign currently underway ★ 【Features】 ■ Enables sludge dewatering with a moisture content of 50-80 wt% without the use of coagulants ■ Achieves SS levels in the filtrate of less than 1 mg/L due to the use of a membrane with a nominal pore size of 0.25 μm *For more details, please refer to the PDF document or feel free to contact us.
It was created to extensively extract polychlorinated biphenyls (PCBs) from biological tissues and aqueous matrices.
Bond Elut PCB is designed to extract a wide range of polychlorinated biphenyls (PCBs) from biological and aqueous matrices. Bond Elut PCB is a multi-phase cartridge filled with a charge-polarized surface packing material in a super clean 3mL polypropylene tube. The optimized method for Bond Elut PCB allows for the quantitative recovery of a wide range of PCB compounds through a simple single solvent elution procedure. In an analytical example using Bond Elut PCB and CP-Select 28/31 GC capillary columns, a wide range of PCB compounds, including PCB 28 and 31, can be separated and isolated in half the time compared to previous methods. Additionally, rapid analysis with Rapid-MS PCB can significantly enhance investment efficiency. *For more details, please refer to the PDF document or feel free to contact us.*
A specially designed cartridge for the rapid and effective extraction of acidic drugs and metabolites from biological matrices such as urine.
Bond Elut Certify II is a specially designed cartridge for the rapid and effective extraction of acidic drugs and metabolites from biological matrices such as urine. It has been optimized for the extraction of acidic drugs, such as salicylic acid, ibuprofen, and acetaminophen, which possess non-polar and anionic properties. *For more details, please refer to the PDF document or feel free to contact us.
【Exhibiting at FOOMA!】Cartridges are cleaned with ultra-pure water! Compatible with steam sterilization - Food and beverage grade Polyethersulfone GFPES series.
The "GFPES Series" is a polyether sulfone filter cartridge that meets the stringent requirements of the food and beverage industry. Designed to maximize service life with repeated hot water sanitization and steam sterilization compatibility. Each element is managed for integrity through diffusion testing to ensure optimal performance. The polyether sulfone membrane provides high flux density and low protein binding, making it an ideal choice for the manufacture of consumables while maintaining the sensory characteristics of the processed products. It is also compatible with Halal and Kosher standards, making it suitable for manufacturing lines aimed at overseas markets. 【Features】 ■ Manufactured in a cleanroom environment to maintain high levels of cleanliness and purity ■ The cartridge is compatible with most chemical disinfectants ■ Plastic meets USP Class VI - biological safety specifications at 121°C ■ Complies with FDA regulations regarding food and beverage contact use *For more details, please refer to the PDF materials or feel free to contact us. Exhibiting at FOOMA JAPAN 2025! June 10 (Tue) - June 13 (Fri) at Tokyo Big Sight, Booth No. 4F-05
Exhibits excellent hydrophobicity! Consistent removal of contaminants achieved even with erosive liquids and organic solvents - PTFE filter cartridge GGPTFE series.
The "GGPTFE Series" is a high-purity general-grade PTFE filter cartridge that offers excellent chemical resistance for a wide range of industrial applications. With a fine retention rate of 0.01μ (10 nanometers), consistent removal of contaminants is achieved even with corrosive liquids and organic solvents. In air/gas/vent applications, the single-layer PTFE membrane exhibits superior hydrophobicity compared to polypropylene and PVDF. 【Features】 ■ Provides excellent chemical resistance for a wide range of industrial applications ■ Fine retention rate of 0.01μ (10 nanometers) ■ Consistent removal of contaminants even with corrosive liquids and organic solvents ■ Exhibits excellent hydrophobicity ■ Manufactured in a cleanroom environment *For more details, please refer to the PDF document or feel free to contact us.
A multi-layer design that provides excellent processing capability while protecting the downstream sterilization-grade cartridge!
The "GSPES Series" is a filter cartridge that offers long life and excellent retention capacity. With its multi-layer design, it is suitable for clarification or solutions containing many particles in various food and beverage, pharmaceutical, biological, and high-purity chemical applications. It has filtration precision of 0.2, 0.45, and 0.65μ, and the multi-layer design provides excellent processing capacity while protecting downstream sterilization-grade cartridges. 【Features】 ■ Provides long life and excellent retention capacity ■ Suitable for clarification or solutions containing many particles ■ Filtration precision of 0.2, 0.45, and 0.65μ ■ Multi-layer design that provides excellent processing capacity while protecting downstream sterilization-grade cartridges *For more details, please refer to the PDF document or feel free to contact us.
![[English Market Research Report] Pharmaceutical Cartridge Market](https://image.mono.ipros.com/public/product/image/33a/2001161423/IPROS15752833555017417622.png?w=280&h=280)
"Free samples" are currently being offered! Please check the application method from the [PDF download] button, or apply directly from the related links.
The global pharmaceutical cartridge market is projected to reach 2.43 billion USD by 2030, with a CAGR of 8.07% from 2024 to 2030. Driving the market are various factors such as the rapid growth of the pharmaceutical industry, an increase in the use of self-administered medications, and a rising demand for wearable injectors.
The capture filter is the key! Dry pumps can now be used in the resin and chemical industries. With dry vacuum pumps, there is no need for the installation of drainage treatment facilities or oil changes.
The "HS Collector" we offer is a high-performance, compact capture filter system that captures over 98% of particles. We have received numerous inquiries about ways to prevent pump troubles in advance, so we developed this system to efficiently capture oil mist, solvents, monomers, oligomers, and more in the vacuum line, while also considering maintenance and chemical resistance. Additionally, it can be provided as a set with a dry vacuum pump. It achieves energy savings and low noise through an endless method. Since it does not use water or oil, there is no need for wastewater treatment facilities or oil changes. *For specifications not listed in this catalog, please copy the sheet within the catalog, fill in the necessary information, and contact us. *For more details, please download the PDF or feel free to contact us.
The capture filter is the key! Dry pumps can now be used in the resin and chemical industries. With dry vacuum pumps, there is no need for the installation of drainage treatment facilities or oil changes.
The "HS Collector" we offer is a high-performance, compact capture filter system that captures over 98% of particles. We have received many inquiries about ways to prevent pump troubles in advance, so we developed this system to efficiently capture oil mist, solvents, monomers, oligomers, and more in the vacuum line, while also considering maintenance and chemical resistance. Additionally, it can be provided as a set with a dry vacuum pump. It achieves energy savings and low noise. Since it does not use water or oil, there is no need for wastewater treatment facilities or oil changes. *For specifications not listed in this catalog, please copy the sheet within the catalog, fill in the necessary information, and contact us. *For more details, please download the PDF or feel free to contact us.
EJ-LARGE cartridge for embedded use EJ-LARGE-LP-2
• 2-stage EJ-LARGE-LP-2 cartridge, small size • Can be integrated near the grip point • Suitable for variations in supply pressure and highly reliable • Ideal for handling sealed objects
Super hydrophilic polyether sulfone adopted! TAB removal dedicated filter cartridge.
Asahi Chemical is a "technical trading company" that handles products tailored to industrial needs, such as industrial parts and equipment. Filtech's 'SM-NB Series' is a filter cartridge specifically designed for TAB removal, made from ultra-hydrophilic polyethersulfone and characterized by its asymmetric triple structure. Due to its chemical properties, PES excels in durability against chemicals and heat, and has high microbial removal performance. Additionally, the asymmetric structure allows for a long lifespan and high flow rate. 【Features】 ■ Uses polyethersulfone (PES) membrane ■ Developed for the removal of heat-resistant acidophilic bacteria in beverages ■ Cartridges are assembled in a clean room ■ Unique thermal welding method ■ Maintains integrity even when repeatedly used under harsh conditions *Related materials are also available on the special website. Please refer to the PDF or contact us directly.
For managing mycoplasma in fluids that are prone to clogging!
The Fluorodyne® EX EDT filter has a nominal filtration accuracy of 0.1 μm and is a mycoplasma control filter that has enhanced compatibility with biologics that are prone to clogging. 【Features】 - Raid-over pleat structure and narrow core 10-inch module cartridge design - The effective filtration area per 10 inches is 0.95 m², achieving a larger filtration area than conventional filters - Asymmetric membrane adopted *For more details, please refer to the PDF document or feel free to contact us.
For managing mycoplasma in fluids that are relatively less prone to clogging!
The Fluorodyne® II DJL filter with a filtration precision of 0.1 μm is an optimal mycoplasma control filter for processing fluids with good flow characteristics that are relatively resistant to clogging, under low differential pressure or for short periods of time. 【Features】 - Constructed with a dual-layer target membrane - Filter packing structure optimized to exhibit good flow characteristics until reaching filtration capacity *For more details, please refer to the PDF document or feel free to contact us.
Vaccines, recombinant protein preparations, and other high-viscosity fluids that are difficult to filter are ideal for filtration sterilization.
The Supor(R) EX ECV filter combines a unique membrane configuration with a laid-over pleat structure and narrow core design, offering both high processing capacity and flow characteristics. With excellent pH compatibility and high permeability for the active ingredient, protein, it is an optimal filtration sterilization grade filter (0.2 μm) for liquids that are difficult to filter. 【Features】 - Composed of a two-layer hydrophilic polyethersulfone (PES) membrane *For more details, please refer to the PDF document or feel free to contact us.
