更新日： 集計期間:Jul 16, 2025～Aug 12, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
31～45 件を表示 ／ 全 58 件
Gundrill
Features of Gundrill Processing ◎ Good straightness For processing at a typical depth of 1000mm, the core misalignment accuracy is less than 1mm ◎ Good surface roughness Excellent surface roughness due to the vanishing effect ◎ Good diameter tolerance Drilling with tolerances of H7 to H9 is possible ◎ Reduced processing time No need for step feed
The air drill "PT-305" is a reversible type.
The air drill "PT-305" is a reversible type with an air coupler. The chuck size is 10mm, and the no-load rotation speed is 1,800rpm. For more details, please download the catalog.
It will be possible to drill holes at low cost in CFRP and C.C.
This is a high-quality and well-regarded HAM PCD drill.
A deep-pocketed desk drill.
- The pulley-belt change method allows for a wide range of speed variations from approximately 1100 to 9600 rpm with 6-speed shifting. - Equipped with cutting depth adjustment (maximum 35mm). - The depth of the throat is one of the longest in the tabletop type (190mm). - Uses a quiet induction motor with high rotational torque. - 3-pin plug specification (2-pin conversion adapter included).
NEDO high-efficiency vibratory drilling machine equipped with an automatic attachment and detachment device for double pipes compatible with 100m drilling.
The "FSGT-150C" is a fully hydraulic rotary vibro drill equipped with the newly developed vibration head "V-150-NTH," achieving a significant improvement in drilling rate in gravel layers. With the newly developed rod attachment and detachment system, the process has been automated, allowing for operation by a single person and greatly reducing the risk of accidents. The drill can move autonomously while equipped with rods capable of drilling up to 100 meters, resulting in a smaller construction area and efficient relocation of the drilling position. 【Features】 ■ Equipped with an automatic rod attachment and detachment device ■ Features the newly developed vibration head "V-150-NTH" ■ Achieves significant improvement in drilling rate in gravel layers ■ Operable by a single person ■ Greatly reduces the risk of accidents *For more details, please refer to the PDF document or feel free to contact us.
Leave it to us for all your servo drill needs!
This product is a servo drill that can control the rotation speed and feed rate via programming, allowing for high-quality hole drilling in composite materials and more. It features program control for rotation speed, feed rate/position, forward and reverse, pecking, and torque limit. Please feel free to contact us if you have any requests. 【Specifications】 ■ Control: Program control (rotation speed, feed rate/position, forward and reverse, pecking, torque limit) ■ Maximum ratings: ・Rotation speed 3,000 rpm, rotation torque 3.0 Nm, feed rate 450 mm/min ・Thrust 400 Kg (for a 0.75 Kw motor) <Designed and manufactured according to required performance> ■ Motor output: 0.75 Kw / 1.5 Kw ■ Weight (main unit): 13 Kg / 18 Kg ■ Dimensions (main unit): 100 x 200 x 500 mm ■ Power supply: AC 200V / 3φ *For more details, please download the PDF or feel free to contact us.
This is a specialized hollow drill for making round holes in paper stacked up to a maximum of 100mm.
This drill has a shape similar to a straw, unlike a regular spiral drill. It has a hollow interior through which the paper debris passes and is expelled outside.
High-precision hole processing achieved with a triple-margin drill supported by six points.
■Product Name■ High-Speed Drill 300 MK30005
Even hard rock formations can be efficiently excavated with a large diameter! A large auger drill equipped with a skid base.
The RPD-220 is a fully hydraulic rotary percussion drill equipped with a high-performance dedicated drill head model "KD-1800." It delivers a maximum pulling force of 152 kN with high torque and 1100 J of impact energy, enabling drilling regardless of the hardness or softness of the geological layers. With centrally arranged controls, it allows for precise operation, and it is equipped with a sliding base that can adjust vertically and horizontally by 400 mm for fine-tuning the drilling point. 【Features】 ■ Equipped with a high-performance dedicated drill head model "KD-1800" ■ Delivers a maximum pulling force of 152 kN with high torque and 1100 J of impact energy ■ Capable of drilling regardless of the hardness or softness of geological layers ■ Allows for precise operation with centrally arranged controls ■ Hydraulic clamp/rod breaker compatible with large-diameter rods *For more details, please refer to the PDF materials or feel free to contact us.
Compact and ultra-lightweight at 4.3 kg! Wet type and handheld!
The "CD-120H" is an ultra-lightweight, handheld core drill. It is equipped with an overload prevention mechanism (clutch). The motor features a reliable double insulation structure. The water supply valve is rotary. Standard accessories include a handle, center drill, tool set, and pickup wire. 【Features】 ■ Compact size of 4.3 kg ■ Wet type ■ Equipped with an overload prevention mechanism (clutch) ■ Motor has a reliable double insulation structure ■ Rotary water supply valve *For more details, please refer to the PDF document or feel free to contact us.
For precision drill and precision pin manufacturing, please leave it to us!
Our company responds to the needs of those who cannot find suppliers for ultra-small pins (φ0.03 and above), ultra-short pins (1.0mm or less), cut pins, pins with a medium flange, long shank drills (with a long shank), reamer long drills (with a long cutting length), and other small diameter drills, small diameter precision pins, and small diameter punches. We also manufacture and sell carbide/HSS drills (standard and custom), stepped drills, flat drills, half-moon drills, end mills, reamers, precision pins, guide pins, positioning pins, cut pins, pin gauges, small diameter punches, and irregular punches. 【Product Lineup】 ■ Drill reamer centered drill ■ Precision pins and small diameter punches ■ Special tools and dedicated tools ■ Pin gauges
For precision drill and precision pin manufacturing, leave it to us!
Our company responds to the needs of customers who are unable to find suppliers for ultra-small pins (φ0.03 and above), ultra-short pins (1.0mm or less), cut pins, pins with medium collars, long shank drills (with long shanks), and reamer long drills (with long cutting edges), as well as small diameter drills, small diameter precision pins, and small diameter punches. We also manufacture and sell carbide/HSS drills (standard and custom), stepped drills, flat drills, half-moon drills, end mills, reamers, precision pins, guide pins, positioning pins, cut pins, pin gauges, small diameter punches, and irregular punches. 【Product Lineup】 ■ Drill reamer centered drill ■ Precision pins and small diameter punches ■ Special tools and dedicated tools ■ Pin gauges
