We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for drill.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

drill(3mm) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

drill Product List

31～60 item / All 87 items

Displayed results
Aluminum Use Unequal Lead 90° Chamfered Carbide Drill DCA

Aluminum Use Unequal Lead 90° Chamfered Carbide Drill DCA

The twist angle (unequal lead) is 5 to 35°! Introducing ultra-hard drills for tap pilot holes.

We would like to introduce our product, the "Carbide Drill with Unequal Lead and 90° Chamfer for Aluminum DCA (for Tap Pilot Holes)." The tip angle is 140°, and the twist angle (unequal lead) ranges from 5° to 35°. The recommended cutting conditions are a cutting speed of 30 to 80 m/min and a feed rate of 0.02 to 0.06 mm/rev. We offer a wide range of sizes, including "DCA1.1-3.2-DS3" for tap size M1.4×0.3 and "DCA1.25-3.2-DS3" for M1.6×0.35, among others. 【Product Lineup (Partial)】 ■DCA1.1-3.2-DS3 ■DCA1.1-5.2-DS3 ■DCA1.25-3.2-DS3 ■DCA1.25-6.2-DS3 *For more details, please refer to the PDF document or feel free to contact us.

  • Other work tools
  • Work tools
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NV Drill (Half Size) 'S-NVDH'

NV Drill (Half Size) 'S-NVDH'

30% more compact in overall length! Sharp cutting performance down to the center of the drill! Reduces tool damage and improves straightness.

The "S-NVDH" is a unique NV drill that allows for mirror finish processing in a single operation without the need for a pilot hole or center drilling. Compared to conventional products, it reduces tool projection and deflection, leading to decreased tool breakage and improved straightness. 【Features】 ■ No need for pilot holes or center drilling ■ Mirror finish achievable in a single operation ■ 4-point guide pads ■ Self-guiding ■ Improved surface roughness and area ■ A rich lineup with increments of 0.1mm from Φ1 to Φ16 (Φ3 also available in 0.01mm increments) *For more details, please refer to the PDF document or feel free to contact us.

  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard FRP Drill 30-1320 Series

Super Hard FRP Drill 30-1320 Series

Ideal for drilling CFRP, GFRP, and aramid fibers.

The sickle-shaped outer blade sharply cuts through fibers, suppressing burrs and delamination, allowing for precise and clean hole drilling. 【Features】 ■ Candle-shaped cutting edge ■ Chiseled edge with thinning ■ Minimizes burrs and delamination at hole entry and exit ■ High precision (H7) hole quality ■ Long lifespan due to carbide material

  • Other machine tools
  • others
  • Other consumables
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Hard Drill HAM30 Series

Super Hard Drill HAM30 Series

HAM's long-established carbide drills will contribute to improvements in quality and cost.

The know-how accumulated through many years of experience in various industries is utilized in each drill. There is also a unique lineup, including three-blade drills capable of high roundness and dimensional accuracy, 40xD deep hole drills, and small diameter PCD drills starting from φ0.5mm.

  • drill
  • Reamer
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
SUN UP Aluminum New High-Speed Hex Shank Drill

SUN UP Aluminum New High-Speed Hex Shank Drill

SUN UP Aluminum Use New High-Speed Hex Shank Drill 10PC AN-1

Rechargeable Driver, Rechargeable Drill Driver, Compatible with Screwdrivers 【Features】 ■ For drilling holes in aluminum, light metals, copper, etc. ■ Special rainbow coating with a large twist angle allows for light and fast drilling, resulting in excellent finish of the drill bit. ■ The rainbow coating, which excels in resistance to welding, reduces aluminum welding and minimizes burrs on the workpiece. ■ Cross-shining processing (2mm or more) provides excellent penetration and light cutting performance. ■ Set includes: 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.8, 5mm, storage holder. ■ Material: High-speed tool steel. ■ Hex shank diameter: 6.35mm. Part number: 26586 *For more details, please feel free to contact us.

  • Other work tools
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mini Mini Straight Drill

Mini Mini Straight Drill

Great performance in tight spaces! Palm-sized straight drill.

The "Mini Mini Straight Drill" is a palm-sized straight-type drill. The drill chuck is a basic key type. It can use drill bits up to 6mm. It excels in tight spaces and is very convenient to use. 【Features】 ■ Palm-sized ■ Great for tight spaces ■ Compatible with drill bits up to 6mm ■ No-load speed: 6,000 rpm *For more details, please refer to the PDF materials or feel free to contact us.

  • drill
  • Other work tools
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
MAB825KTS Magnetic Drill with Milling Function

MAB825KTS Magnetic Drill with Milling Function

A magnetic drill with milling function that can perform "long hole" processing!

The MAB825KTS is an innovative model that has won the prestigious Red Dot Design Award! With its cross table model, it allows for mobile work in factories and on-site. Compared to cutting and grinder finishing, it enables clean long hole processing. 【Features】 ■ Safety clutch ■ Automatic lubrication system ■ Torque control ■ Full wave control ■ Magnet lamp ■ Overheat prevention ■ Reversible (forward and reverse rotation) ■ Carbon brush wear indicator Cross table movement range: X: 110mm / Y: 120mm

  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Servo drill

Servo drill

Leave it to us for all your servo drill needs!

This product is a servo drill that can control the rotation speed and feed rate via programming, allowing for high-quality hole drilling in composite materials and more. It features program control for rotation speed, feed rate/position, forward and reverse, pecking, and torque limit. Please feel free to contact us if you have any requests. 【Specifications】 ■ Control: Program control (rotation speed, feed rate/position, forward and reverse, pecking, torque limit) ■ Maximum ratings: ・Rotation speed 3,000 rpm, rotation torque 3.0 Nm, feed rate 450 mm/min ・Thrust 400 Kg (for a 0.75 Kw motor) <Designed and manufactured according to required performance> ■ Motor output: 0.75 Kw / 1.5 Kw ■ Weight (main unit): 13 Kg / 18 Kg ■ Dimensions (main unit): 100 x 200 x 500 mm ■ Power supply: AC 200V / 3φ *For more details, please download the PDF or feel free to contact us.

  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Small Path Candle Type Sweep Cut Drill (Carbide)

Small Path Candle Type Sweep Cut Drill (Carbide)

Significantly reduces the through-hole drilling and deburring processes. Ultra-hard small-diameter sweep cut drill.

ー

  • Other cutting tools
  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Processing Example] GP Drill

[Processing Example] GP Drill

Processing 1000 holes in 4 minutes and 40 seconds! Here we introduce an example of processing using Iwata Tool's GP drill.

We would like to introduce an example of machining using our product, the 'GP Drill'. Using S50C as the work material, we conducted non-step hole machining under conditions such as water-soluble cutting oil, a machining depth of 4mm, and a cutting speed of 100m/min. As a result, the machining speed improved dramatically, allowing us to process one hole in 0.25 seconds. Additionally, we were able to perform machining with a hole depth of 4D in a non-step manner. There are various other machining examples, including non-step through-hole machining. 【Machining Details】 ■ Work Material: S50C ■ Results - Machining was completed in 0.25 seconds per hole - Machining with a hole depth of 4D was achieved in a non-step manner - More than 20,000 holes were processed - Machining speed improved dramatically *For more details, please refer to the PDF document or feel free to contact us.

  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cutting Tool Ultra High-Speed Drill GP Drill

Cutting Tool Ultra High-Speed Drill GP Drill

High precision, ultra-long life! Non-step processing possible up to 3D, and up to 7D depending on the situation!

The ultra-high-speed drill GP drill is highly precise and has an extremely long lifespan. It can process up to 3D in a non-step manner (and up to 7D depending on the situation). Ultra-high-speed processing takes 0.25 seconds per hole, with a lifespan of over 20,000 holes. *GPDS1CBALT Material being processed: S50C Processing depth: 4mm. The ALT coating has excellent heat resistance, oxidation resistance, and lubricity, providing stable high-temperature hardness. Its thin film capability allows it to be used for small-diameter tools that conventional ALD coatings cannot accommodate. For more details, please contact us or refer to the catalog.

  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
All Core Drill L150 Series

All Core Drill L150 Series

Achieving lightweight design with a simple structure specialized for drilling performance.

The "L150 series" is a core drill that adopts an ideal effective length of 150mm for all sizes, derived from the thickness of composite building materials that require drilling with a core drill. The discharge of chips has dramatically improved, enhancing the workability of drilling. Additionally, it becomes easier to check the condition of residual materials, and removal becomes smoother. There are three types available: for mortar (LV type), for ALC panels (LA type), and for siding (LS type). For more details, please contact us or view the catalog on our website. https://sanko-techno.co.jp/products/core_drill/drill01/?parent_url=https://sanko-techno.co.jp/products/fastening/core_drill/

  • LD_1.jpg
  • LS.jpg
  • LV.jpg
  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super hard/high-speed steel 3-step drill

Super hard/high-speed steel 3-step drill

For precision drill and precision pin manufacturing, leave it to us!

Our company responds to the needs of customers who are unable to find suppliers for ultra-small pins (φ0.03 and above), ultra-short pins (1.0mm or less), cut pins, pins with a medium flange, long shank drills (with long shanks), and reamer long drills (with long cutting edges), as well as small diameter drills, small diameter precision pins, and small diameter punches. We also manufacture and sell carbide/HSS drills (standard and custom), stepped drills, flat drills, half-moon drills, end mills, reamers, precision pins, guide pins, positioning pins, cut pins, pin gauges, small diameter punches, and irregular punches. 【Product Lineup】 ■ Drill reamer centered drill ■ Precision pins and small diameter punches ■ Special tools and dedicated tools ■ Pin gauges

  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electric drill for 2-axis dowel hole processing 'DD40GUSA'

Electric drill for 2-axis dowel hole processing 'DD40GUSA'

Custom-made products also demonstrate their power! With a portable type, 2-axis boring processing can be done easily.

We handle the German MAFELL company's electric drill 'DD40GUSA' for two-axis dowel hole processing. It easily accommodates the processing of large materials and demonstrates its power with custom products. The centerline for hole processing is displayed on a transparent resin ruler, allowing for precise processing. Additionally, using the optional boring template makes high-precision processing simple. 【Features】 ■ The centerline for hole processing is displayed on a transparent resin ruler, enabling accurate processing. ■ Easily accommodates the processing of large materials and demonstrates its power with custom products. ■ High-precision processing is easily achievable using the optional boring template. *For more details, please refer to the PDF document or feel free to contact us.

  • drill
  • Other cutting tools
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cordless Hammer Drill "GBH 18V-40C/CH"

Cordless Hammer Drill "GBH 18V-40C/CH"

Achieves a 9.0J impact with the BITURBO system! Equipped with a kickback prevention feature.

The "GBH 18V-40C/CH" is a cordless hammer drill equipped with a user interface that makes it easy to check the status of the main unit and select work modes. It achieves high power through Bosch's unique BITURBO system, and with a striking force of 9.0J, it enables speedy tasks such as drilling and breaking concrete. Additionally, by downloading the dedicated app "BOSCH Tool Box" on your smartphone, it features a connectivity function that allows you to customize it to your own specifications. 【Features】 ■ Equipped with kickback prevention and vibration reduction mechanisms ■ User interface for checking the status of the main unit and selecting work modes ■ Connect function compatible with smartphone for function settings ■ Comes with two ultra-high capacity ProCORE 8.0Ah batteries (GBH 18V-40CH is body only) *For more details, please refer to the PDF document or feel free to contact us.

  • drill
  • Power tools
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-efficiency NV Drill "KS-NVD"

High-efficiency NV Drill "KS-NVD"

Processing time reduced to 1/3 to 5! A drill that achieves both high efficiency and high precision.

The "KS-NVD" is a high-efficiency NV drill that achieves both high efficiency and high precision for low-resistance processing and chip fragmentation. It ensures a machining accuracy of IT7 grade, which is 25% lower than conventional drills. Additionally, the composite blade allows for chip fragmentation, and processing time has been reduced to 1/3 to 1/5. 【Features】 ■ Unique chisel shape developed ■ Excellent cutting performance at the drill center ⇒ Achieves low-resistance processing ■ Composite blade with cutting edges at the center and outer circumference ⇒ Chip fragmentation ■ Machining efficiency: Achieves V・f value of 100 ■ Machining accuracy: Secures IT7 grade ■ Available in diameters from Φ5 to Φ16 *For more details, please refer to the PDF document or feel free to contact us.

  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-Precision Perforation Drill 'Zero Vari XS (GK-HSTZX-S)'

Ultra-Precision Perforation Drill 'Zero Vari XS (GK-HSTZX-S)'

No oil hole, shorter blade length and overall length for a lower price! Economical ultra-precision drilling drill that can be re-sharpened.

The "Zero Buri XS (GK-HSTZX-S)" is a hybrid drill specifically designed for stainless steel, titanium, and heat-resistant alloys, with a focus on thin sheet cross holes that do not produce burrs. With three cutting edges, the drill increases rigidity by concentrating force at the center. This reduces the need for deburring work, enabling cost savings and high-efficiency production. It is available in sizes ranging from 1.0Φ to 16.0Φ in 0.1mm increments. Please feel free to contact us for inquiries. 【Features】 ■ Drill outer diameter H7 plus intersection ■ Increased rigidity due to force concentration at the center with three cutting edges ■ Capable of finishing with a reamer through single-pass drilling without a pilot hole ■ Economical as it can be re-sharpened (re-sharpening is accepted for sizes of 2mm or larger) ■ Expanding into overseas markets (EU/America/China) *For more details, please refer to the PDF document or feel free to contact us.

  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-precision perforation drill 'Zero Vari XS (GK-HFZX-S)'

Ultra-precision perforation drill 'Zero Vari XS (GK-HFZX-S)'

Expanding into overseas markets! Hybrid drill specifically for thin plate cross holes for carbon steel, high tensile, SCM, and FCD.

The "Zero Buri XS (GK-HFZX-S)" is an ultra-precision drilling tool that reduces deburring work, enabling cost reduction and high-efficiency production. It has no oil holes, and its short blade length and overall length contribute to a lower price. The wavy 3D composite R shape minimizes the risk of defects and achieves excellent cutting and chip removal. It allows for one-shot drilling without a pilot hole and can be finished with a reamer, and it can be re-sharpened from 2 mm and above, making it an economical product. Please feel free to contact us when you need it. 【Features】 ■ Drill outer diameter H7 plus intersection ■ Increased rigidity due to concentration of force at the center with three cutting edges ■ No oil holes, short blade length and overall length for a lower price ■ Lineup from 1.0Φ to 16.0Φ in 0.1 mm increments ■ Expansion into overseas markets (EU/USA/China) *For more details, please refer to the PDF document or feel free to contact us.

  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Machining Drill "Moonlight Drill"

Machining Drill "Moonlight Drill"

Stunning sharpness! Achieves a sharp cutting edge with a unique blade shape! A drill that eliminates the need for pilot holes.

The "Moonlight Drill" is a machining drill that does not require a pilot hole due to its unique tip shape. It allows for easy drilling of thick stainless steel plates, which have traditionally been difficult to drill with conventional drills, using a φ10mm drill. By using an air drill for dry drilling, it demonstrates excellent performance in work environments where oil is undesirable. Additionally, its overwhelming sharpness makes drilling in unstable positions, such as at heights, much easier, significantly expanding its range of applications. 【Features】 ■ No pilot hole required due to unique tip shape ■ Sharp cutting ability achieved through unique blade design ■ Smooth chip removal enabled by unique groove shape ■ Excellent grip performance that does not select drilling targets ■ Lasts ten times longer than conventional products *For more details, please refer to the PDF document or feel free to contact us.

  • drill
  • Other cutting tools
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Keyless Drill Chuck MT4 (Integrated Type)

Keyless Drill Chuck MT4 (Integrated Type)

Leave the work machinery, pressing machines, and NC/MC machines to us.

Kawashima Machinery Co., Ltd. has been engaged in the sale and purchase of various machines, including machine tools, forging machines, and NC/MC machines, both new and used, since its establishment in 1930. We also handle new machine tools from various manufacturers. Additionally, we offer a selection of small machines available for purchase through our website, so please take advantage of this service.

  • Other machine tools
  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aqua Drill EX Starting

Aqua Drill EX Starting

High-speed and long-lasting chamfering and V-grooving from centering.

Good bite performance and high-precision positioning are possible. Good machining surface due to sharp cutting edge shape. Multi-functional from centering to chamfering and V-groove processing.

  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
G7 Drill Series: Carbide Drill for One-Pass Machining at IT7 Level

G7 Drill Series: Carbide Drill for One-Pass Machining at IT7 Level

IT7 grade one-shot machining carbide drill series!

The G7 drill series consists of a drill bit and a special reamer. By separating each groove, it allows the chips generated from the cutting edge to be discharged separately, eliminating chip jamming. The reamer features a special blade shape, achieving one-pass machining at IT7 level. The lineup includes the G7X drill for solid holes, the G7T drill for cast holes, and the Y7 drill as a high-feed version of the G7 drill.

  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Custom manufacturing and regrinding of cutting tools" *Case study collection available as a gift.

"Custom manufacturing and regrinding of cutting tools" *Case study collection available as a gift.

[Essential for those struggling with chamfering and deburring] Designed and manufactured from just one piece to meet your needs! Our experienced staff will propose cost reduction solutions.

Our company designs and manufactures original specification cutting tools and performs regrinding of various tools. We set prices based on outer diameter and length, regardless of the type of tool. We can provide standard and special items within a short delivery time of 2 to 3 weeks. We accommodate tool sizes from φ4 to 25mm, and coating treatment is also possible. There are cases where adopting our tools has led to a 20% reduction in costs. [Introduction of tools that can be manufactured and regrinded] ■ Twist drills ■ Vanishing drills ■ Long drills (up to 250mm) ■ Step drills ■ Step vanishing drills ■ Drills with oil holes ■ End mills, etc. ★ In our "Improvement Case Collection," we introduce cases where regrinding has resolved burr retention and extended tool life. You can view it immediately via "PDF Download."

  • Other cutting tools
  • drill
  • End Mills
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Diamond monoblock solid drill "Beam Drill"

Diamond monoblock solid drill "Beam Drill"

Numerous adoption results in the aviation field! Minimum drill diameter φ0.4mm, twist angle 30°. High-speed drilling and extended lifespan while suppressing burrs and delamination.

1. Compared to conventional brazed diamond drills, the integrated design features a 30° twist up to the cutting edge, enabling high-speed processing. 2. The cutting edge strength is high, with no diamond detachment. 3. Good machining accuracy results in a clean finished surface. 4. Chips can be smoothly discharged.

  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fully hydraulic rotary percussion drill 'RPD-220'

Fully hydraulic rotary percussion drill 'RPD-220'

Even hard rock formations can be efficiently excavated with a large diameter! A large auger drill equipped with a skid base.

The RPD-220 is a fully hydraulic rotary percussion drill equipped with a high-performance dedicated drill head model "KD-1800." It delivers a maximum pulling force of 152 kN with high torque and 1100 J of impact energy, enabling drilling regardless of the hardness or softness of the geological layers. With centrally arranged controls, it allows for precise operation, and it is equipped with a sliding base that can adjust vertically and horizontally by 400 mm for fine-tuning the drilling point. 【Features】 ■ Equipped with a high-performance dedicated drill head model "KD-1800" ■ Delivers a maximum pulling force of 152 kN with high torque and 1100 J of impact energy ■ Capable of drilling regardless of the hardness or softness of geological layers ■ Allows for precise operation with centrally arranged controls ■ Hydraulic clamp/rod breaker compatible with large-diameter rods *For more details, please refer to the PDF materials or feel free to contact us.

  • Other machine tools
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Automotive bodywork spot cutter JB drill φ8×80

Automotive bodywork spot cutter JB drill φ8×80

Spot cutters are JB drills. They are the ally of workers in automotive sheet metal spot welding removal! Easy positioning, light cutting, long lifespan.

Since its launch in 2009, it has been continuously and long-term loved primarily by automotive sheet metal experts. 【Features】 - Uses high-quality special steel made in Japan as the base material. - Heat treatment thoroughly examined by highly skilled technicians in Japan, using carefully selected cutting tool materials. - Manufactured by a cutting tool specialist established in 1985, focusing on precision machining. 1. Easy to handle Thanks to its unique blade shape, it has excellent grip, making precise positioning easy and stable. It allows for accurate targeting and consistent cutting, thereby reducing stress for the operator. 2. Improved efficiency and productivity - The high hardness of the cutting tool material ensures excellent cutting performance, minimal wear, and long-lasting blades, allowing for continuous work. This reduces the frequency of re-sharpening. - Additionally, it shortens work time, enhances productivity (increasing profit margins), reduces the burden on operators, and contributes to energy savings. 3. Enhanced cost-effectiveness - A single high-quality JB drill can remove many spots, thereby reducing the cutting tool cost per spot (hole). Purchases can be made through the related links below.

  • drill
  • cutter
  • Other cutting tools
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-hard drill for deep hole machining of small diameters - Cross groove drill (for non-ferrous metals and plastics)

Ultra-hard drill for deep hole machining of small diameters - Cross groove drill (for non-ferrous metals and plastics)

Achieving ultra-deep hole machining with an L/D ratio of 30 to 50 using external lubrication!

Aren't you under the impression that coolant-through equipment is essential for hole machining with an L/D ratio of 30 or more? The new cross-grooved drill draws coolant into the hole's interior by incorporating a main groove and a reverse twist groove on the drill's outer circumference when the drill is rotated. Inside the hole, the coolant is retained in the grooves on the outer circumference, improving "cooling" and "lubrication," resulting in excellent cutting performance and significantly enhancing the surface roughness of the hole's inner surface. Additionally, the margin-less design equalizes the holding power and suppresses the occurrence of hole bending.

  • drill
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to drill

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.