We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for drill.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

drill(6mm) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

drill Product List

16～30 item / All 50 items

Displayed results
SUN UP Hex Shank Drill for Electric Drill and Bench Drill for Wood and Resin

SUN UP Hex Shank Drill for Electric Drill and Bench Drill for Wood and Resin

SUN UP Wood and Resin Hex Shank Drill 10PC M-3

Electric Drill, Rechargeable Drill Driver, Rechargeable Driver, For Bench Drill 【Features】 ■ For drilling holes in wood and resin ■ Sharp tip penetrates the material for precise round hole drilling ■ Widely usable for DIY, woodworking, decoration, hobbies, and modeling ■ Set includes: 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5mm storage holder ■ Hex shank diameter: 6.35mm Model number: 23437 *For more details, please feel free to contact us.

  • Other work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hybrid Drill "Zero Vari GK-HCTZ" for CFRTP Use

Hybrid Drill "Zero Vari GK-HCTZ" for CFRTP Use

If there are no burrs, the hole accuracy is below H6! It allows for good engagement and precise positioning with composite R finishing.

The product we handle, "Zero Buri GK-HCTZ," is a hybrid drill for CFRTP. The recommended cutting conditions are cutting speed V = 20 to 40 m/min and feed per revolution f = 0.02 mm/rev. *Wet and mist drilling. It allows for one-shot drilling without a pilot hole, producing no burrs, and as long as there is no runout, the hole accuracy is below H6. Additionally, the wavy shaped effect significantly reduces heat with a large waveform effect, achieving outstanding cutting performance. 【Features】 ■ Taper End Mill - A taper end mill that eliminates subtle burrs to achieve zero burrs. ■ Extreme Keeness Blade - A special R-shaped design that disperses cutting resistance, reduces heat, further minimizes burrs (delamination), and extends the lifespan of the R blade. ■ Special Waved Drill - A wavy drill that achieves hole accuracy below H6 with 1/4 of the cutting resistance, effectively minimizing burrs. *For more details, please refer to the PDF document or feel free to contact us.

  • Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hybrid Drill for Steel "Zero Vari GK-HFZ"

Hybrid Drill for Steel "Zero Vari GK-HFZ"

For SGP-E-H pipes with wet perforation! With a single shot perforation without a pilot hole, there are no burrs, and as long as there is no runout, the hole accuracy is below H6.

The "Zero Valley GK-HFZ" that we handle is a hybrid drill for iron. The recommended cutting conditions are a cutting speed of V = 24 to 60 m/min and a feed rate of f = 0.039 mm/rev. It can create holes without burrs in a single pass without a pilot hole, and as long as there is no runout, the hole accuracy is below H6. With excellent straightness, it can drill straight even through slightly curved pilot holes, and it is a jointly developed product with the Fukui Prefectural Industrial Technology Center, with a patent obtained. [Cutting Examples] ■ S 50C (wet drilling) ■ SS 400 (wet drilling) ■ SGP-E-H pipe (wet drilling) *For more details, please refer to the PDF materials or feel free to contact us.

  • Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
KDR-901R Forward and Reverse Rotation Type Air Drill

KDR-901R Forward and Reverse Rotation Type Air Drill

A lineup suitable for various drilling operations that demonstrates high work efficiency!

We introduce the "Air Drill," a reversible type that demonstrates high work efficiency with a lineup suitable for various drilling operations. We handle the "KDR-901R," a left-right rotating drill that expands the working range. 【Features】 ■ Compact, powerful, and easy to use ■ Equipped with a silencer, the exhaust sound is quiet ■ Easy speed adjustment *For more details, please refer to the PDF document or feel free to contact us.

  • Other work tools
  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Drill for NC Automatic Lathes

Drill for NC Automatic Lathes

Improved chip evacuation with variable lead grooves! Reduces tool wrapping and workpiece scratches.

The "Drill for NC Automatic Lathes" is a compact size suitable for NC lathes. With improved chip discharge due to the variable lead groove (long type), it suppresses chip wrapping on the tool and scratches on the workpiece. Additionally, it employs a coating with excellent wear resistance, reducing tool damage. 【Features】 ■ Compact size ■ Variable lead groove (long type) ■ Groove shape that breaks up chips ■ Coating with excellent wear resistance ■ Reduces tool damage *For more details, please refer to the PDF document or feel free to contact us.

  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hybrid Drill for Stainless Steel "Zero Vari GK-HSZ"

Hybrid Drill for Stainless Steel "Zero Vari GK-HSZ"

Achieves excellent cutting and chip removal performance with a large curve! No burrs produced with a single hole drilling without a pilot hole!

The "Zero Buri GK-HSZ" is a hybrid drill for stainless steel. It creates holes in one shot without the need for a pilot hole, producing no burrs, and as long as there is no runout, the hole accuracy is below H6! With excellent straightness, it can correct slightly bent pilot holes while drilling straight. This product was developed in collaboration with the Fukui Prefectural Industrial Technology Center and is patented. 【Cutting Examples】 ■ SUS 304 (wet drilling) ■ SUS 304 pipe (wet drilling) ■ SS 430 (wet drilling) ■ SUS 303 (wet drilling) ■ SUS 630 (wet drilling) The recommended cutting conditions are cutting speed V = 24 to 60 m/min, and feed per revolution f = 0.039 mm/rev. *For more details, please refer to the PDF document or feel free to contact us.

  • Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Special Drill "Flow Drill"

Special Drill "Flow Drill"

Introducing tungsten special drills! They can process without the need for a pilot hole in just one step!

The "Flow Drill" is a special drill that can perform burring on thin plates that cannot be tapped. It adopts a hot drilling process using friction heat. Since blind nuts and nut welding are unnecessary, it helps to streamline assembly. Flow drilling can be performed on materials such as soft steel, stainless steel, aluminum, copper, brass, and special alloys. 【Features】 ■ Burring can be performed on thin plates that cannot be tapped ■ No need for a pilot hole; processing can be done in one step ■ Adopts a hot drilling process using friction heat ■ No need for blind nuts or nut welding ■ Helps to streamline assembly *For more details, please refer to the PDF document or feel free to contact us.

  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hybrid Drill "Zero Vari GK-HCZ" for CFRP

Hybrid Drill "Zero Vari GK-HCZ" for CFRP

Suppress heat with waveform effects and achieve outstanding cutting performance! Waveform drill that minimizes burrs finely.

The "Zero Bari GK-HCZ" we handle is a hybrid drill for drilling CFRP. It allows for one-shot drilling without a pilot hole, producing no burrs, and achieving hole accuracy of H6 or better as long as there is no runout! It also accommodates cross holes on the sides and can be re-sharpened, leading to cost reductions. When combined with aluminum, it can drill from both the aluminum side and the CFRP side. With excellent straightness, it can correct for slightly bent pilot holes while drilling straight. This product was developed in collaboration with the Fukui Prefectural Industrial Technology Center and is patented. 【Features】 ■ Ripple Shaped Effect - The wave effect suppresses heat and achieves outstanding cutting performance. ■ Extreme Keeness Blade - The special R shape disperses cutting resistance, reduces heat, and further minimizes burrs (delamination), extending the lifespan of the R blade. ■ Special Wave Drill - With cutting resistance reduced to 1/4, it achieves hole accuracy of H6 or better and minimizes burrs with its wave-shaped drill. Recommended cutting conditions are cutting speed V = 20-40 m/min and feed per revolution f = 0.02 mm/rev. *Dry drilling *For more details, please refer to the PDF document or feel free to contact us.

  • Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
IT8 grade hole precision carbide drill for single-pass machining of castings! 'BJGF Drill'

IT8 grade hole precision carbide drill for single-pass machining of castings! 'BJGF Drill'

"Drill bit" + "4 special reamer blades" achieves excellent machining precision.

The BJGF drill consists of a drill bit and four vanishing reamer blades. It achieves "high-precision machining" through high rigidity and multi-blade reamer design, "excellent surface roughness" due to superior cooling and chip removal with a back jet coolant supply, and "extended lifespan" through the use of multi-layer coatings, enabling one-pass finishing of cast workpieces.

  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Machining Drill "Moonlight Drill"

Machining Drill "Moonlight Drill"

Stunning sharpness! Achieves a sharp cutting edge with a unique blade shape! A drill that eliminates the need for pilot holes.

The "Moonlight Drill" is a machining drill that does not require a pilot hole due to its unique tip shape. It allows for easy drilling of thick stainless steel plates, which have traditionally been difficult to drill with conventional drills, using a φ10mm drill. By using an air drill for dry drilling, it demonstrates excellent performance in work environments where oil is undesirable. Additionally, its overwhelming sharpness makes drilling in unstable positions, such as at heights, much easier, significantly expanding its range of applications. 【Features】 ■ No pilot hole required due to unique tip shape ■ Sharp cutting ability achieved through unique blade design ■ Smooth chip removal enabled by unique groove shape ■ Excellent grip performance that does not select drilling targets ■ Lasts ten times longer than conventional products *For more details, please refer to the PDF document or feel free to contact us.

  • drill
  • Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Burr-free drill for aluminum and resin GK-HAZ - No deburring required!

Burr-free drill for aluminum and resin GK-HAZ - No deburring required!

No need for deburring! For materials like brass, acrylic, and Jelacon! This ultra-hard drill, [Zero Bari], can drill straight while correcting even slightly bent pilot holes.

The "Zero Buri GK-HAZ" is a revolutionary hybrid drill that requires no deburring for aluminum and resin. It is a carbide drill that processes in one go without the need for a pilot hole, producing no burrs, and as long as there is no runout, the hole accuracy is below H6! With outstanding straightness, it can drill straight even with slightly bent pilot holes, and it is a jointly developed product with the Fukui Prefectural Industrial Technology Center, already patented! 【Cutting Examples】 ■ Aluminum 6063 (simultaneous drilling of double plates) ■ Acrylic (non-coated dry drilling) ■ Brass (non-coated dry drilling) ■ Delrin (non-coated dry drilling) ■ MC Nylon (non-coated dry drilling) ▶ Recommended Cutting Conditions Cutting speed V = 50 to 100 m/min Feed per revolution f = 0.041 mm/rev *For more details, please refer to the PDF document or feel free to contact us.

  • Other cutting tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NV Drill for Casting Holes 'IS-NVD'

NV Drill for Casting Holes 'IS-NVD'

Improved roundness, improved hole position accuracy, and improved straightness without being affected by casting holes!

The "IS-NVD" is an NV drill designed for machining core holes in a single pass. Thanks to its unique rough cutting edge wedge action, it suppresses behavior caused by misalignment of the core hole, allowing the finishing edge to achieve high precision in the inner diameter. Additionally, it is less affected by core misalignment, and by having four rough cutting edges, it reduces the load per edge. 【Features】 ■ The engagement angle is made concave to suppress contact during approach. ■ Improved roundness, hole position accuracy, and straightness. ■ Less affected by core misalignment. ■ Four rough cutting edges reduce the load per edge. ■ Suitable for machining hole requirement accuracy IT grade 7. ■ Available in diameters from Φ6 to Φ16. *For more details, please refer to the PDF document or feel free to contact us.

  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
G7 Drill Series: Carbide Drill for One-Pass Machining at IT7 Level

G7 Drill Series: Carbide Drill for One-Pass Machining at IT7 Level

IT7 grade one-shot machining carbide drill series!

The G7 drill series consists of a drill bit and a special reamer. By separating each groove, it allows the chips generated from the cutting edge to be discharged separately, eliminating chip jamming. The reamer features a special blade shape, achieving one-pass machining at IT7 level. The lineup includes the G7X drill for solid holes, the G7T drill for cast holes, and the Y7 drill as a high-feed version of the G7 drill.

  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super hard drill | Replaceable cutting edge | 'HT 800 WP'

Super hard drill | Replaceable cutting edge | 'HT 800 WP'

The "HT 800 WP" is a replaceable tip drill developed by a German global manufacturer with over 125 years of history, capable of processing holes up to Φ40.

The 'HT 800 WP' accommodates hole machining up to a maximum diameter of Φ40 with standard products, offering a variety of inserts and holders that support machining depths from 1xD to 10xD, tailored to the workpiece material. The inserts feature a special finish on the cutting edge, providing excellent wear resistance. The holders are designed with a size increment of 0.5mm, ensuring a robust design with high rigidity. The unique groove shape allows for optimal chip evacuation even in deep hole machining. By incorporating a coolant duct on the groove heel side, effective coolant supply to the cutting edge is made possible. *For more details, please refer to the cutting conditions table in the product catalog or feel free to contact us.

  • drill

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Drill

Drill

A small diameter drill that can be used in combination with a pin vise.

It is generally used for drilling holes. It is ideal for processing steel, cast iron, aluminum alloys, and non-metals.

  • Other work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to drill

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.