We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for filter.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

filter×セントラルフィルター工業 - List of Manufacturers, Suppliers, Companies and Products

filter Product List

16～24 item / All 24 items

Displayed results
Cartridge filter "Juracol"

Cartridge filter "Juracol"

The number of external pores in granular activated carbon is about 10 times more than that in powdered activated carbon!

"Juracore" is a new type of fiber activated carbon cartridge filter developed jointly by Osaka Gas Chemical Co., Ltd. and our company. Conventional fiber activated carbon has struggled to achieve performance that overcomes its high cost, and has only been used in limited applications until now. Therefore, we developed this product using pitch-based fiber activated carbon made from a special pitch with a high activation yield as the raw material, achieving high cost performance. [Features] - Excellent adsorption speed - Large adsorption capacity - No leaching of activated carbon - Superior ease of replacement *For more details, please download the PDF or feel free to contact us.

  • 4a.PNG
  • 4b.PNG
  • Filtration Filter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cartridge Filter "Juraflow (DFE Type)"

Cartridge Filter "Juraflow (DFE Type)"

High porosity and long lifespan! Hydrophilic with low pressure loss in aqueous solutions.

The "Jura Flow (DFE type)" is a high-performance cartridge filter of the pleated type. Being a pleated type, it offers high flow rates with low pressure loss. Since it does not use binders, it has minimal leachables and is clean. The filtration precision is 0.3 to 10 μm, heat resistance is up to 70°C, and the filtration area is 0.45 m² (for the 250 mm model). 【Features】 ■ High flow rates with low pressure loss due to the pleated design ■ High porosity and long lifespan ■ Hydrophilic, resulting in low pressure loss with aqueous solutions ■ Minimal leachables and clean due to the absence of binders *For more details, please download the PDF or feel free to contact us.

  • 5a.PNG
  • Filtration Filter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cartridge Filter "Juraflow (DFP Type)"

Cartridge Filter "Juraflow (DFP Type)"

Made of all polypropylene with excellent chemical resistance! Filtration precision is 0.5 to 30μm.

The "Jura Flow (DFP type)" is a high-performance cartridge filter of the pleated type. Being pleated allows for high flow rates with low pressure loss. Since it does not use a binder, it has minimal leachables and is clean. The materials for the main media, protector, core, and end plate are all polypropylene. 【Features】 ■ High flow rates with low pressure loss due to the pleated design ■ High void ratio and long lifespan ■ Made entirely of polypropylene, offering excellent chemical resistance ■ Minimal leachables and clean due to the absence of binders *For more details, please download the PDF or feel free to contact us.

  • 6a.PNG
  • Filtration Filter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cartridge Filter "Jura Membrane PES TYPE"

Cartridge Filter "Jura Membrane PES TYPE"

Polyether sulfone membrane type cartridge filter!

We would like to introduce our cartridge filter, "Jura Membrane PES TYPE." It is used for applications such as sterilizing filtration of water for food use, pure water for cleaning liquid crystal displays and semiconductor devices, pure water for manufacturing in the liquid crystal display and semiconductor-related industries, and pure water for manufacturing electronic tubes and related components. The filtration precision (absolute filtration) is 0.1, 0.2, 0.45, 0.65, 0.8, and 1.2 μm. 【Dimensions】 ■ Total length: 125/250/500/750/1000 mm ■ Inner diameter: 30 mm ■ Outer diameter: 68 mm ■ Filtration area: 0.63 m² (250 mm) *For more details, please download the PDF or feel free to contact us.

  • Filtration Filter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cartridge Filter "Sintered Metal Mesh for Liquids (PM)"

Cartridge Filter "Sintered Metal Mesh for Liquids (PM)"

Suitable for high-viscosity solutions such as polymer adhesives, lubricants, and oils like turbine oil!

We would like to introduce our cartridge filter, the 'Sintered Metal Mesh (PM) for Liquids'. It fully demonstrates the excellent filtration precision of the metal mesh. It has good permeability and low pressure drop. It possesses the unique strength and toughness of stainless steel, and additionally, it has excellent pressure resistance due to sintering. It also has heat resistance characteristics of stainless steel, allowing it to be used in an oxidizing atmosphere at temperatures ranging from -269°C to 600°C. 【Features】 ■ Fully demonstrates the excellent filtration precision of the metal mesh ■ Good permeability and low pressure drop ■ Possesses the unique strength and toughness of stainless steel, with excellent pressure resistance due to sintering ■ Has heat resistance characteristics of stainless steel, usable in an oxidizing atmosphere from -269°C to 600°C ■ Unique corrosion resistance of stainless steel ■ High regeneration effect through backwashing, allowing for long-term use *For more details, please download the PDF or feel free to contact us.

  • 11a.PNG
  • Filtration Filter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cartridge filter "Gas Use Juraflow (DFP type)"

Cartridge filter "Gas Use Juraflow (DFP type)"

Since it is a pleated type, it has high flow rate and low pressure loss! It has a high void ratio and a long lifespan.

The "Gas Use Juraflow (DFP Type)" is a high-performance cartridge filter of the pleated type. Made entirely of polypropylene, it has excellent chemical resistance, and since it does not use any binders, it has minimal leachables and is clean. There is no increase in differential pressure due to condensed water even with moist gases. It is suitable for applications such as sterilization and dust filtration of gases like air and nitrogen. 【Features】 ■ Pleated type for high flow rate and low pressure loss ■ High porosity for a long lifespan ■ Made entirely of polypropylene with excellent chemical resistance ■ Minimal leachables and clean due to the absence of binders ■ No increase in differential pressure due to condensed water even with moist gases *For more details, please download the PDF or feel free to contact us.

  • 12a.PNG
  • Filtration Filter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cartridge filter "Sintered metal mesh for gases (PM)"

Cartridge filter "Sintered metal mesh for gases (PM)"

Suitable for gases such as air, nitrogen, oxygen, as well as toxic gases like carbon monoxide and ammonia gas!

We would like to introduce our cartridge filter, the "Sintered Metal Mesh for Gases (PM)." It fully demonstrates the excellent filtration precision of the metal mesh. It has good permeability and low pressure drop. It possesses the unique strength and toughness of stainless steel, and additionally, it has excellent pressure resistance due to sintering. Furthermore, it has heat resistance characteristics of stainless steel, allowing it to be used in an oxidizing atmosphere at temperatures ranging from -269°C to 600°C. 【Features】 ■ Fully demonstrates the excellent filtration precision of the metal mesh ■ Good permeability and low pressure drop ■ Possesses the unique strength and toughness of stainless steel, with excellent pressure resistance due to sintering ■ Has heat resistance characteristics of stainless steel, usable in an oxidizing atmosphere at -269°C to 600°C ■ Unique corrosion resistance of stainless steel ■ High regeneration effect through backwashing, allowing for long-term use *For more details, please download the PDF or feel free to contact us.

  • 13a.PNG
  • Filtration Filter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Coarse dust air filter (UP type)

Coarse dust air filter (UP type)

Widely used as various air conditioning pre-filters and standalone filters!

The "Coarse Dust Air Filter (UP Type)" is a flat-type filter element designed for particles ranging from 3 to 30 μm. The filter media typically uses flame-retardant non-woven fabric. It can be washed several times and easily regenerated. It is widely used as a pre-filter for various air conditioning systems and as a standalone filter. 【Lineup (partial)】 ■ UP-305 ■ UP-350 ■ UP-400 ■ UP-450 ■ UP-500 *For more details, please download the PDF or feel free to contact us.

  • Filtration Filter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heat-resistant HEPA filter (UHPT type/UHPCT type)

Heat-resistant HEPA filter (UHPT type/UHPCT type)

The standard UHPT type and the high air volume type UHPCT type are now available!

We would like to introduce our "Heat-resistant HEPA Filters (UHPT type/UHPCT type)." These filters have a wide variety of HEPA-grade heat-resistant applications and can be used in combination with pre-filters and medium-efficiency filters. We offer the standard UHPT type and the high air volume UHPCT type. We can also manufacture special sizes that are not standard. 【UHPT Type Standard Specifications】 ■ Collection Efficiency: 99.97% at 0.3μm ■ Initial Pressure Drop: 245Pa ■ Final Pressure Drop: 490Pa ■ Operating Temperature: Below 150℃ (continuous) *For more details, please download the PDF or feel free to contact us.

  • Filtration Filter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to filter

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.