gauge Product List and Ranking from 33 Manufacturers, Suppliers and Companies

Magnetic Level Gauge "M-SERIES"

Non-magnetic chamber, magnetic float, built-in magnetic strip. Provides liquid level control function.

The "M-SERIES" is a magnetic level gauge that can be applied to chemical, petrochemical processes, boilers, and other industries. It features a non-magnetic chamber, a magnetic float, and a magnetic strip, and the vertical chamber is connected to a tank with two ends. This series is also equipped with accessories such as switches and measurement sensors, as well as converters that transform signals into a 4-20mA (2-wire) DC output. 【Product Lineup】 ■ M Standard Type: Side Mount Series ■ MP Type: Top Mount Transparent Series ■ MB Type: Top Mount Series, etc. *For more details, please refer to the PDF materials or feel free to contact us.

Company：YTK
Price：Other

Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Level Gauge Tubular Type 'NL/SL SERIES'

Maximum operating temperature 100℃. Maximum operating pressure 4 to 7 kg/cm² liquid gauge.

The "NL/SL SERIES" is a simple liquid gauge designed for use at a pressure rating of 10 kg/cm² or less. The length between the centers is more than 1.5 meters, and an intermediate joint ring is used. The gauge glass is made of heat-resistant borosilicate. 【Lineup】 ■ NL SERIES / with protective support rod - NLT-1 / NLT-2 screw type - NLF-1 / NLF-2 flange type ■ SL SERIES / with protective support pipe - SLT-1 screw type - SLF-1 flange type *For more details, please refer to the PDF document or feel free to contact us.

Company：YTK
Price：Other

Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sight Glass Gauge "FTB Series"

Can be used for flow visibility and simple flow monitoring! Robust tie bolt structure!

The "FTB Series" is a robust sight glass gauge with a tie bolt structure suitable for a wide range of applications. This product can be used for flow visibility and simple flow monitoring. Additionally, we also offer the "FB Series (Flange)" which can be used in a temperature range of -10 to +70℃. 【Specifications】 ■ Fluid: Various gases and liquids ■ Body Material: SUS304, 316, 316L ■ Paddle: SUS316 ■ Glass: Tempered glass ■ Packing: PTFE or Gore-Tex ■ Operating Pressure: 0 to 1.1 MPa ■ Temperature: -10 to +60℃ *For more details, please refer to the PDF document or feel free to contact us.

Company：YTK
Price：Other

Flow Meter
Stainless steel utensils and containers
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

『TAPER RING & PLUG GAGES』

High-precision, low-cost taper gauge limited for resistance welding electrodes.

The "TAPER RING & PLUG GAGES Comprehensive Catalog" is a taper gauge for spot welding electrodes from Saitama Yozai, used for welding current, pressure, and electrode cooling. It contains color images, diagrams, specifications, and is explained in an easy-to-understand manner. 【Product Lineup】 ■ Taper gauge for cap tip measurement ■ 1/5 taper ■ 1/10 taper ■ MT#1 MT#2 MT#3 taper ■ Taper reamer for taper correction *For more details, please refer to the PDF document or feel free to contact us.

Company：埼玉溶材
Price：Other

Other machine elements

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Manostar Gauge "WO71"

We offer a compact differential pressure gauge with various piping connection options and a flat-type differential pressure gauge with a thickness of 29.2mm!

We offer the manometer gauge 'WO71', which can be used for detecting air filter clogging, in two types: flat type differential pressure gauge and compact differential pressure gauge. It can be utilized in areas such as general factory management facilities, dust collector negative pressure, and air conditioning equipment differential pressure. Please feel free to consult us if you have any requests. 【Features】 ■ Flat type differential pressure gauge (N type, R type) - Slim design with standard rotating connection for smart piping - Achieves a very thin thickness of 29.2mm as a manometer gauge ■ Compact differential pressure gauge (FS type, PS type) - Comes standard with a pointer for convenient setting of differential pressure target and limit values - Various piping connections are possible - Changing the polarity is possible simply by swapping the high-pressure and low-pressure connections *Only for side piping *For more details, please download the PDF or feel free to contact us.

Company：山本電機製作所
Price：Other

Pressure

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mano Star Gauge "WO81"

A diverse lineup! High-precision differential pressure gauge compatible with airflow and wind speed scales.

The "WO81" is a manometer gauge that allows for polarity change of the connector and enables piping without crossing the tubes. We offer three types of outer shapes, three types of fixed needles, and a total of 24 pressure ranges from 50 Pa to 100 kPa and ±50 Pa to ±3 kPa. It also supports airflow and wind speed memory, providing a rich lineup. 【Features】 ■ Easy-to-read wide-angle scale (pointer rotation angle 270°) ■ Easy polarity reversal piping connection ■ Unique mechanism that is less affected by abnormal high-pressure surges ■ High-performance silicone rubber diaphragm with low hysteresis ■ Band link mechanism that prevents pointer wobble *For more details, please download the PDF or feel free to contact us.

Company：山本電機製作所
Price：Other

Pressure

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Measuring instrument "Sliding Gauge"

Very convenient for measuring in narrow, recessed areas! Available for metal and wax!

The "Sliding Gauge" is a very convenient tool for measuring in narrow and recessed areas. It features a very fine tip to allow measurements in tight spaces and has a stronger spring, available as "No.940S for Metal," and a unique spherical tip ideal for wax, available as "No.940W for Wax." 【Specifications】 ■Dimensions: Width 62 × Length 100 mm ■Measuring Range: 0–10 mm ■Minimum Scale: 0.1 mm *For more details, please refer to the PDF document or feel free to contact us.

Company：ハープ
Price：Other

Other work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Gauge jigs and molds are also supported. High-precision in-house processing is possible!

We perform in-house processing at a precision of 1μm!

Watanabe Precision Industry Co., Ltd. is a company primarily engaged in the design and manufacturing of gauges, inspection tools, jigs, and mold components. We can provide proposals considering "ease of use," "cost," "durability," and "appearance" in the context of your application. Additionally, we offer products with shapes adjusted to the precision of 0.001 mm by machining metals (cutting, grinding, electrical discharge machining, and manual finishing). 【Product Line】 ■ Gauges ■ Jigs ■ Molds ■ Other processing, etc. ■ Design, etc. *For more details, please download the PDF or feel free to contact us.

Company：渡辺精密工業
Price：Other

Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Quality Assurance of Watanabe Precision Industry

The Quality Assurance Department is independent from the Manufacturing Department! We conduct shipping inspections of the high-precision gauges and jigs produced by our company!

Our company has one first-class mechanical inspection technician and eight second-class mechanical inspection technicians, and there are employees in the manufacturing department who hold mechanical inspection technician qualifications. The quality assurance department operates independently from the manufacturing department and conducts shipping confirmations for the high-precision gauges and jigs produced by our company. When our gauges and measuring instruments are used for product quality assurance purposes, it is assumed that customers will perform inspections and calibrations at least once a year. If you wish to have inspections and calibrations conducted by our company, we can accommodate this for a fee. Please feel free to consult with us. 【Qualifications】 ■ First-class mechanical inspection technician: 1 ■ Second-class mechanical inspection technicians: 8 ■ Manufacturing department: Employees with mechanical inspection technician qualifications *For more details, please refer to the related links or feel free to contact us.

Company：渡辺精密工業
Price：Other

Mechanical Design

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

The hole inspection is OK with this! "Plug Gauge - Special Plug Gauge"

[Concern] I want to measure whether the hole has worn and expanded. I want to determine its usability.

For simple shapes, measurement can be performed using the following methods: 1. Caliper measurement (approximate: 0.1 mm unit) 2. Measurement with a hole-specific micrometer (approximate: 0.01 mm unit) 3. Comparative measurement with block gauges and cylinder gauges (approximate: 0.001 mm unit) <For easy measurement> To measure the wear of a hole, preparing a dedicated measuring instrument (hereafter referred to as "gauge") is the quickest way. This allows for easy measurement and ensures that anyone measuring will obtain the same results. When it is not necessary to retain measurement values and simply determine whether the diameter of the hole is within the specified tolerance, a plug gauge is used. In the case of holes, if the degree of wear may vary depending on the depth position such as the entrance, middle, or back of the hole, it is necessary to measure with a dedicated cylinder gauge. Gauges are specially designed to match the measurement circumstances of the object being measured, making measurement very easy. To prevent wear from use, gauges implement the following measures on the sliding surfaces: 1. Hardening treatment 2. Surface treatment (e.g., hard chrome plating, TIN coating) 3. Use of carbide materials

Company：渡辺精密工業
Price：Other

Distance measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rapid lead time reduction and quality verification: "Comprehensive Gauge / Comprehensive Mold Gauge"

[Concern] I want to measure multiple locations at once. I want to determine usability. => "Comprehensive gauge" solves your concerns all at once!

When you want to measure and inspect the quality of parts in a timely manner on the manufacturing floor, such as on a parts manufacturing line, or when you want to conduct inspections and measurements during shipping inspections, you may use multiple measuring instruments for measurement and inspection. In this case, there are issues such as the occurrence of human errors and the inability to perform quick measurements or inspections. For example, when you want to measure hole pitch, hole diameter, the positional relationship of multiple holes (coaxiality), flatness, and perpendicularity simultaneously. <"Comprehensive Gauge for Easy Measurement"> Using a comprehensive gauge makes it simple. While it is possible to measure everything at once using a three-dimensional measuring machine, it requires a clean installation environment and results in longer measurement times. Preparing a comprehensive gauge (dedicated measuring instrument) is a shortcut to easy measurement. The comprehensive gauge also has the advantage of being user-friendly (anyone can use it easily). It is called a "comprehensive gauge" because it measures multiple locations simultaneously and comprehensively. The production of a comprehensive gauge requires detailed discussions on the alignment of judgment criteria and measurement methods, as it is not limited to measuring a single location. However, there is no need to worry at all, as design experts provide advice based on various experiences.

Company：渡辺精密工業
Price：Other

Distance measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Usable in various places! "Special Scissors Gauge"

[Concern] I want to measure the wear of the axis. I want to determine its usability.

In the case of metal products, materials with wear resistance and heat treatment are implemented to improve wear resistance; however, due to high-speed rotation and prolonged use, the shaft diameter may become smaller or uneven wear may occur. As a result, abnormal noises may arise, and the product may not be able to exhibit its original performance. When the degree of wear is in microns (i.e., 0.001 mm), it is impossible to visually confirm the wear. For simple shapes, measurement can be performed using the following methods: 1. Measured with calipers (approximate: 0.1 mm) 2. Measured with a micrometer (approximate: 0.01 mm) 3. Comparative measurement with block gauges and dial gauges (approximate: 0.001 mm) <For easy measurement> Preparing a dedicated measuring instrument (hereinafter referred to as "gauge") is the quickest way. If you simply want to know whether the shaft diameter falls within the specified tolerance, a feeler gauge is used. It can also be used when determining thickness. Our gauges are custom-designed and manufactured based on inquiries about your products and work environment, allowing us to provide products that are easier to use and more durable compared to standard gauges.

Company：渡辺精密工業
Price：Other

Distance measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

A collection of fine innovations! "Taper Hole Measuring Tool"

[Concern] I want to measure a tapered hole.

<Measuring Tapered Holes> There are times when we want to measure tapered (conical) holes. The typical measurement targets are the large diameter, small diameter, angle, taper length, and geometric tolerances. Large diameter: The largest diameter Small diameter: The smallest diameter Angle: The angle of the cone Taper length: The distance from the large diameter to the small diameter Geometric tolerances: Various tolerances such as positional tolerance and coaxiality Since tapered holes often connect to straight holes, there may be cases where we want to measure both the straight and tapered holes simultaneously. It is impossible to measure tapered holes easily with general-purpose measuring tools. Additionally, there may be cases where we want to confirm whether the tapered hole is machined to be perfectly round, similar to straight holes. This means we want to check the roundness of the tapered hole to see if it is an assembly of ellipses. <Easily Measuring> The easiest way to measure tapered holes is with a gauge. While measurement with a three-dimensional measuring machine is also possible, measuring with a gauge allows for much faster and easier measurements. For products where you are unsure how to measure, we can propose a structure tailored to the dimensions and tolerances you want to verify, so there’s no need to worry! Please feel free to consult with us!

Company：渡辺精密工業
Price：Other

Distance measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Designed for our customers! "Dedicated Caliper Gauge"

[Concern] I want to measure the diameter of a hole.

<Measuring the Diameter of a Hole> After machining a cylindrical hole, there may be a need to check if the hole has been correctly processed. Specifically: - Is the diameter of the hole not too large or too small? - Is the depth of the hole not too deep or too shallow? Additionally, there may be cases where the hole is required to be a perfect circle. If contouring or profile machining is performed using an end mill rather than simple reaming, it is necessary to check for roundness. <Measurement Methods> In general, visual inspection is possible, but if that is insufficient, the following measurement methods can be used: 1. Measuring with calipers (0.1mm increments) 2. Measuring with a hole micrometer (0.01mm increments) 3. Comparative measurement with block gauges and cylinder gauges (0.001mm increments) However, using general-purpose gauges as mentioned above can sometimes lead to issues such as poor workability depending on the product. By preparing dedicated gauges, it is possible to easily obtain the same measurement results regardless of who is measuring. <Image> A specially made caliper gauge for measuring shallow holes with a large diameter (It can measure hole diameters of approximately Φ1,000.)

Company：渡辺精密工業
Price：Other

Distance measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Really troublesome! "Blade Wear Management"

[Concern] I want to measure the wear of cutting tools; I want to manage cutting tool wear.

Metal blades are used for cutting and processing various materials such as food, wood, metal, and construction materials. New or freshly sharpened blades can cut well, but as their sharpness decreases, the quality of the cut material declines, and in the worst case, machinery can break down. Blades can regain their sharpness through re-sharpening. However, continuous re-sharpening can reduce their size, and in some cases, they may not fit the machinery or could damage the machinery. <Blade Management> The R shape (curved shape) at the cutting edge, the angle of the blade, and the overall length are generally managed items. <Management Method (Example)> To check the wear, press a board cut into the ideal shape or the worn-out shape against the blade and hold it up to a light source. Visually inspect the light leaking through the gap to assess the degree of wear. There are also methods to measure the angle of the blade or the tip R. <Easy Measurement> To measure easily, it is necessary to prepare specialized measuring instruments (gauges) or limit samples (masters or standards). Since they are specifically designed, they can be measured easily and accurately. Additionally, to measure multiple blades, designs may incorporate interchangeable measuring parts.

Company：渡辺精密工業
Price：Other

Distance measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

gauge Product List and Ranking from 33 Manufacturers, Suppliers and Companies

gauge Manufacturer, Suppliers and Company Rankings

gauge Product ranking