16～29 item / All 29 items
Peeling off the attached label will cause it to tear, which prevents opening or rewriting.
Peeling off the attached label will cause it to tear, preventing opening or rewriting. The material is polyester, and it is a highly heat-resistant label with a temperature range of 150°C to -40°C. For more details, please contact us or download the catalog.
This is a self-laminating label specifically for label cores. By using it together with the label core, it displays more information through optical fibers.
The label for label cores is a self-laminating label specifically designed for label cores. It is made of vinyl and, when used with the label core, displays a large amount of information through optical fibers. The operating temperature range is from 66°C to -40°C. By creating labels yourself, you can accommodate "small quantities and a variety of products" and "short delivery times." Panduit Corporation offers a wide range of label types compatible with various printers, allowing you to choose products that meet your needs. For more details, please contact us or download the catalog.
![[Usage] Self-laminating labels / Rotating labels](https://image.mono.ipros.com/public/product/image/47f/2000128990/IPROS2591415929808960164.JPG?w=280&h=280)
Introducing the usage of "self-laminating labels," which are ideal for protecting cable displays and printed surfaces, and "rotating labels," which allow for rotation and movement, making them easy to read.
**How to Use Self-Laminating Labels** Attach the printed part of the label horizontally to the cable, and wrap the label around the cable using the pads of your fingers. Once you cover the printed part with the transparent laminate section and stick it down, you’re done. **How to Use Rotating Labels** Hold the non-adhesive part in the center of the label and peel it off the backing. Stick the adhesive part (anchor) at the top of the label onto the cable. Make sure to attach the label straight to the cable. Wrap the label around the cable and rotate it in the direction you wrapped it. The anchor part will separate from the label. The label can be rotated and slid. By standing the non-adhesive part of the anchor upright, it can serve as a stopper for the label. Remove it if it’s not needed. For more details, please download the catalog or contact us.
This is a label that can be used for various purposes. It is suitable for display on flat surfaces such as various devices, printed circuit boards, and distribution boards.
The "Component Label," designed for dot matrix printers, is a label that can be used for various purposes. It is suitable for displaying on flat surfaces such as various devices, printed circuit boards, and distribution boards. We offer products made from materials such as polyester, vinyl cloth, and polyvinyl fluoride. By allowing customers to create their own labels, we can accommodate "small quantities and diverse varieties" with "short delivery times." Panduit Corporation offers a range of label types compatible with various printers, delivering products that provide customers with trust and satisfaction. For more details, please contact us or download the catalog.
This is a label that can be used for various purposes. We offer a wide variety of materials. It is ideal for creating product nameplates and connector labels.
This is a label that can be used for various purposes. It is suitable for display on flat surfaces such as various devices, printed circuit boards, and distribution boards. For more details, please contact us or download the catalog.
It is suitable for displaying network equipment such as patch panels, faceplates, and punch-down blocks.
This label is ideal for network equipment. It is suitable for displaying network devices such as patch panels, faceplates, and punch-down blocks. For more details, please contact us or download the catalog.
Peeling off the attached label will cause it to tear, preventing opening or rewriting.
Peeling off the attached label will tear it, preventing opening or rewriting. It is recommended for security purposes. For more details, please contact us or download the catalog.
Start rolling from the printed part and cover the printed part with the transparent section. This protects the printed text from fading.
The "Self-Laminating Label" for thermal transfer handheld printers allows you to print information such as the destination of electrical wires. By starting the roll from the printed area and covering it with the transparent part, the printed text is laminated to prevent fading and is protected from dirt, solvents, and oils. It can also display information after terminal completion. Please refer to the recommended cable sizes listed in the catalog for the appropriate cable size for the labels you will be using. For more details, please contact us or download the catalog.
These are labels without adhesive that can be inserted into label holders or transparent pockets for use.
The adhesive is not included. It is used by inserting it into commercially available transparent pockets. It can be clearly displayed with tags or plates on thick cables. For more details, please contact us or download the catalog.
This is a label that can be used for various purposes. It is suitable for display on flat surfaces such as various devices, printed circuit boards, and distribution panels.
The "Component Label" for heat transfer handheld printers is a label that can be used for various purposes. It is suitable for displaying on flat surfaces such as various devices, printed circuit boards, and distribution panels. The materials used are vinyl cloth, which is excellent in oil resistance and abrasion resistance and can be repositioned, as well as polyester, which is highly durable and can be used at high temperatures. Additionally, there is a polyester (super adhesive) that has strong adhesion capabilities even on rough surfaces, powder-coated surfaces, and coated surfaces. For more details, please contact us or download the catalog.
This is a non-laminated label for cable identification. It is made of flexible material and can be wrapped around cables for display.
The "Non-Laminated Label" for thermal transfer handheld printers is a non-laminated label for cable identification. It is made of a flexible material that can be wrapped around cables for display. It can be used for flag-type displays on electrical wires. The material is excellent in oil resistance and abrasion resistance, using vinyl cloth that can be repositioned, and nylon cloth that is highly heat resistant. For more details, please contact us or download the catalog.
It enables high-quality printing with excellent printability.
○This label is ideal for network devices. ○It is suitable for displaying network devices such as patch panels, faceplates, and punch-down blocks. ●For more details, please download the catalog or contact us.
It is a heat-resistant and excellent flag-shaped label that is easy to see.
○ It is possible to secure a wide display space on thin cables such as optical fiber cables. ○ With a unique design for the installation method, it is possible to choose whether to fix the label to the cable or to rotate/move it after installation. ● For more details, please download the catalog or contact us.
Adhesive attached to high-quality vinyl film. Can be easily applied anywhere.
The ISO warning labels of the PESW type are various warning labels based on the provisions of ISO 3864. They are made of high-quality vinyl film with adhesive backing, making them easy to apply anywhere. The material is vinyl, and the temperature range for use is -40°C to 80°C. There are card types for electric shock warning <ISO 3864-B3.6>, radiation warning, laser warning, hazardous area <ISO 3864-B3.1>, and static electricity warning, as well as roll types for electric shock warning <ISO 3864-B3.6> and high temperature warning. For more details, please contact us or refer to the catalog.
