We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for nozzle.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

nozzle(1mm) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.

nozzle Product List

31～60 item / All 259 items

Displayed results
Matrix Automatic Spray Device 'HTX M5 Sprayer'

Matrix Automatic Spray Device 'HTX M5 Sprayer'

Spraying is possible in any size within the range of 180mm × 140mm.

The "HTX M5 Sprayer" is an automatic spray device for MS imaging that enables reproducible and uniform matrix spraying (±3% by weight). By spraying heated matrix, it is possible to form fine crystals (＜5μm). 【Features】 ■ Can spray any size within a range of 180mm × 140mm ■ Faster nozzle speed (about 4 times that of the TM-Sprayer) ■ Capable of forming fine crystals by spraying heated matrix ■ Less clogging of the nozzle ■ Nozzle height can be adjusted in three stages

  • 2019-04-09_15h16_39.png
  • 2019-04-09_15h16_49.png
  • 2019-04-09_15h16_55.png
  • 2019-04-09_15h17_04.png
  • sprayer_04.png
  • Other physicochemical equipment
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rehiler manufactured rotary tank cleaning nozzle (Model: 5S5 series)

Rehiler manufactured rotary tank cleaning nozzle (Model: 5S5 series)

High-impact, high-reliability control rotary cleaning nozzle! "Supports up to 9.6m," "High flow rate, high cleaning power," "Compatible with rotation monitoring sensors."

Product Name: XactClean HP+ (Series 5S5) Ideal for large tank cleaning. Achieves uniform and powerful cleaning with high-impact flat jets and controlled rotation. Key Features: • High-impact cleaning with specially designed flat fan nozzle • Suitable for large tanks with controlled rotation and high flow rate • High reliability ensured by a robust drive unit • Compatible with Lechler's rotation monitoring sensors • Food and pharmaceutical compliant (EC No. 1935/2004 and FDA compliant) Technical Specifications: • Cleaning target diameter: 0.25 to 9.6m • Maximum operating temperature: 95°C • Recommended operating pressure: 3 bar • Filter specification: 0.3mm / 50 mesh • Installation orientation: All directions compatible • Bearing structure: Double ball bearing • Connection sizes: 1 BSPP, 1 1/4 BSPP, 1 1/2 BSPP (HygienicFit compatible) • Material: 316L stainless steel, PEEK, EPDM This nozzle is an ideal solution for large tank cleaning in the food, pharmaceutical, and chemical sectors, achieving both cleaning quality and process management.

  • nozzle
  • nozzle
  • Beverage Production Equipment
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air Nozzle "Straight Nozzle TAIFUJet TF-F24"

Air Nozzle "Straight Nozzle TAIFUJet TF-F24"

24mm wide type! A compact air nozzle that excels in impact resistance and quietness.

The "Straight Nozzle TAIFUJet TF-F24" is a compact air nozzle with a spray width of 24mm. It features a width of 24mm, an overall length of 30mm, and a hole diameter of φ1.0mm, excelling in impact force and quietness. It can be installed in narrow spaces where conventional nozzles could not be mounted, allowing for air blowing in every corner. It is ideal for applications such as chip removal, paint powder removal, blowing away defective products, and pinpoint cooling of resin molded products. 【Features】 ○ Spray width of 24mm ○ Excellent impact force ○ Excellent quietness ○ Compact air nozzle ○ Compact flat nozzle For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle "65SUS Type"

Nozzle "65SUS Type"

Low pressure loss! Low cost! Lightweight! Energy-saving hybrid blow nozzle SUS.

The "65SUS type" is an energy-saving nozzle made of stainless steel that dries while draining water from the rinsing tank (finishing tank) incorporated into the cleaning device. The slit width can be easily adjusted, and if there is any disturbance in the air velocity, adjusting the slit width can resolve the issue on the spot. Additionally, all models come with fixed brackets (material USU), allowing for options of top, bottom, or side mounting by using the fixed brackets. It is mainly used for drying after water drainage of printed circuit boards and after cleaning bolts and nuts. 【Features】 ■ Made of stainless steel ■ Achieves high air velocity with low pressure loss ■ Significantly reduces electricity consumption ■ Provides uniform high performance air across the entire slit ■ Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

  • nozzle
  • Drying Equipment and Devices
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air Rotary Hole Cleaning Nozzle, Air Only, Part Number M735NBH-50G

Air Rotary Hole Cleaning Nozzle, Air Only, Part Number M735NBH-50G

High-speed rotating nozzle for bottle cleaning. This product cleans the dirt inside the bottle and drains the water after cleaning.

The nozzle, which is long and pipe-shaped, rotates at high speed while spraying air or mist-like cleaning solution from its tip. Compared to conventional nozzles that spray in one direction, it reduces the amount of cleaning solution used to about 1/2 to 1/3. The standard products come in four different lengths, with types available that spray only air and types that spray air/mist.

  • Stainless steel container
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle "100 SUS Type"

Nozzle "100 SUS Type"

Ideal for rapid water removal, general water removal, and drying of water-based two-component paints! High-flow nozzle SUS

The "100SUS Type" is an energy-saving nozzle made of stainless steel that is incorporated into cleaning devices for simultaneous water drainage and drying after the rinsing tank (finishing tank). The slit width can be easily adjusted, and if there is any disturbance in the blowing wind speed, the issue can be resolved on the spot by adjusting the slit width. Additionally, the blowing angle can also be easily adjusted. It is mainly used for sorting good and defective products, such as food. 【Features】 ■ Made of stainless steel ■ Achieves high wind speed with low pressure loss ■ Significantly reduces electricity consumption ■ Provides uniform high performance air across the entire slit ■ Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

  • nozzle
  • Drying Equipment and Devices
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aluminum disinfectant spray nozzle

Aluminum disinfectant spray nozzle

Aluminum disinfectant spray nozzle with slit processing of width 30-50μ.

Aluminum disinfectant spray nozzle Slit processing with a width of 30-50μ (micrometers) Aspect ratio of 100 times φ35μ (micrometers) Ultrafine hole processing with a depth of 0.3mm

  • Engine parts
  • Other industrial robots
  • Other packaging machines
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fully Automatic Applicator 'AFA-Standard'

Fully Automatic Applicator 'AFA-Standard'

A tabletop coater and automatic bar coater that will rapidly accelerate your development!

The "AFA-Standard" is a development support type fully automatic applicator. It allows you to choose from a wide variety of base plates according to purpose and application, making it easy to replace and clean plates such as glass, vacuum, double-channel vacuum, and high-precision stainless steel vacuum. The vacuum automatically turns ON/OFF in conjunction with the coating operation. The vacuum pump is built-in, saving space and designed for quiet operation. 【Features】 ■ Light and efficient workability ■ Covers ultra-low to high speeds ■ High driving stability ■ Easy and accurate positioning of the coating area ■ Fully supports Japanese for intuitive operation *For more details, please refer to the PDF materials or feel free to contact us.

  • Secondary Cells/Batteries
  • Printing Machinery
  • Testing Equipment and Devices
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle VVP+AS"

2-fluid nozzle "Fan-shaped nozzle VVP+AS"

Built-in check valve on the air side! Mist fan-shaped nozzle usable with both 1 and 2 fluid specifications.

The "Fan-Shaped Nozzle VVP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single-fluid and dual-fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to function as a single-fluid nozzle in the medium to high water flow range and as a dual-fluid nozzle in the low water flow range. It is a liquid pressurization type that supplies liquid to the dual-fluid nozzle. 【Features】 - Usable in both single-fluid and dual-fluid configurations - Single-fluid in medium to high water flow range, dual-fluid in low water flow range - Wide turn-down ratio (throttling ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Built-in check valve on the air side For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Spray coating nozzle (pure water rinse spray)

Spray coating nozzle (pure water rinse spray)

You can select the particle size of the liquid to be applied.

You can select the particle size of the liquid to be applied. We can accommodate a wide range of applications, including various thin film coatings for FPD and the labor-saving of pure water rinsing for FPD glass. 【Features】 ○ You can select the particle size of the liquid to be applied ○ Average particle diameter from 5μm to 1mm ○ We can accommodate a wide range of applications, including various thin film coatings for FPD and the labor-saving of pure water rinsing for FPD glass. For more details, please contact us or download the catalog.

  • spray
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle "75SUS Type"

Nozzle "75SUS Type"

The electric consumption of the supply air source generation device can be significantly reduced with the hybrid blow nozzle SUS.

The "75SUS type" is an energy-saving nozzle made of stainless steel that dries while draining water from the rinse tank (finishing tank) incorporated into the cleaning device. It features a simple internal rectifying structure, allowing for very low pressure loss and high airspeed. The electricity consumption of the air supply source generation device can also be significantly reduced. Additionally, by using the high blow nozzle SUS in the draining and drying tanks, it can be designed compactly, reducing the installation space. It is mainly used for air curtains to prevent the intrusion of outdoor pests and other contaminants. 【Features】 ■ Made of stainless steel ■ Achieves high airspeed with low pressure loss ■ Significantly reduces electricity consumption ■ Provides uniformly high performance across the entire slit ■ Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

  • nozzle
  • Drying Equipment and Devices
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle "SUS125 Type"

Nozzle "SUS125 Type"

Ideal for water drainage and drying after plate cleaning and for water drainage after sheet cleaning!

The "SUS125 type" is an energy-saving nozzle made of stainless steel that is incorporated into cleaning devices to dry while draining water from the rinsing tank (finishing tank). It features a simple internal rectifying structure, allowing for very low pressure loss and high airspeed. This can significantly reduce the electricity consumption of the air supply generation device. Additionally, by using the high blow nozzle SUS in the draining and drying tanks, it can be designed compactly, reducing the installation space. It is mainly used for water drainage and drying after washing steel plates, draining after washing sheets, and removing polishing powder after glass polishing. 【Features】 - Made of stainless steel - Achieves high airspeed with low pressure loss - Significantly reduces electricity consumption - Provides uniform high performance across the entire slit - Slit width is easily adjustable *For more details, please refer to the catalog or feel free to contact us.

  • nozzle
  • Drying Equipment and Devices
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-density semiconductor dispenser nozzle "Pinpoint Nozzle"

High-density semiconductor dispenser nozzle "Pinpoint Nozzle"

This is a cutting-edge dispenser nozzle utilizing micro-drilling technology, thin-walled processing technology, and precision machining technology.

A high-precision dispensing nozzle specifically designed for "narrower" and "deeper" pinpoint applications in high-density semiconductors with densely arranged parts. This is the most advanced dispenser nozzle created by Tekudai, set to launch in the fall of 2024. ◆ An ultra-fine tip with a thickness of 0.02mm, optimal for "narrower" points Utilizing advanced thin-wall processing technology, the difference between inner and outer diameters is controlled to the extreme (thickness of 0.02mm). It can reach into the narrow gaps of high-density semiconductors. ◆ A 2mm long tip that reaches "deeper" points The length of the nozzle tip has been doubled from the conventional 1mm to 2mm. This allows for precise dispensing at deep points, such as between components. Additionally, our unique integrated processing achieves high-precision dispensing, unlike the press-fit method.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle DDRP+AS"

2-fluid nozzle "Fan-shaped nozzle DDRP+AS"

Compatible with multi-variety production! Mist fan-shaped nozzle usable with both 1st and 2nd fluid specifications.

The "Fan-shaped Nozzle DDRP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single fluid and dual fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single fluid nozzle in the medium to high water flow range and as a dual fluid nozzle in the low water flow range. It is a liquid pressurization type that supplies liquid to the dual fluid nozzle. 【Features】 - Usable in both single fluid and dual fluid configurations - Single fluid in medium to high water flow range, dual fluid in low water flow range - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Spray pattern thickness angle is wide at 60°, allowing for surface cooling For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tap hole cleaning nozzle (φ3.5mm) Part number M735THC-N35G

Tap hole cleaning nozzle (φ3.5mm) Part number M735THC-N35G

Eco-friendly cleaning for the Earth. Energy-saving, time-saving, and quality improvement. Powerful air for a thorough clean from deep within holes.

This product is used for cleaning chips and cutting fluids generated during the machining of blind holes and through holes in various drilling processes. It operates at high speed while spraying air from the tip of a slender pipe-shaped nozzle. Compared to conventional nozzles that spray in one direction, it reduces air consumption to approximately 1/2 to 1/3. The length of the metal part at the nozzle tip is available in 50 or 100 millimeters, with nozzle diameters of 3.5 millimeters, 4 millimeters, 4.5 millimeters, and 5 millimeters. You can choose from two types of tip shapes: rectangular (horizontal spray) or beveled (forward spray). (Rectangular: multiple directions forward and sideways. Beveled: air impact is stronger than rectangular.)

  • Industrial Vacuum Cleaners
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air Nozzle "Straight Nozzle TAIFUJet TF-F50"

Air Nozzle "Straight Nozzle TAIFUJet TF-F50"

50mm wide type! Air nozzle that draws in surrounding air and sprays it in double the amount.

The "Straight Nozzle TAIFUJet TF-F50" is an air nozzle that injects air with a width of 50mm, drawing in surrounding air to double the amount being injected. It features a compact and wide flat nozzle with a width of 50mm, a total length of 65mm, a hole diameter of φ1.2mm, and a heat resistance temperature of 400℃. By sucking in air through holes positioned just before the nozzle, it doubles the supplied air for injection. It is used in industries such as steel, machinery, electrical and electronics, paper, pulp and printing, food, and transportation. 【Features】 ○ Air nozzle with a spray width of 50mm ○ Draws in surrounding air to double the amount injected ○ Excellent impact uniformity ○ Superior quietness ○ Compact size For more details, please contact us or download the catalog.

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lechler fine mist cooling spray nozzle

Lechler fine mist cooling spray nozzle

The Lehira company's fine mist cooling spray nozzle is effective with ultra-fine mist spraying.

The Rehira Corporation's spray nozzle (model number: 2MN series) is a spray nozzle specifically designed for fine mist cooling. It makes a significant contribution to countering the extreme heat in summer and the dryness in winter. It is often used for temperature and humidity management in plant cultivation and livestock facilities. Additionally, it is utilized not only in the agricultural market but also in industrial markets (food, semiconductors, paper manufacturing) for temperature and humidity control. A major feature of the fine mist spray is its ability to regulate temperature and humidity without wetting crops, livestock, or products.

  • 写真 2024-11-22 13 47 43.jpg
  • others
  • nozzle
  • Other environmental measures and recycling
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrafine Mist Two-Fluid Nozzle "Quick Fogger"

Ultrafine Mist Two-Fluid Nozzle "Quick Fogger"

A two-fluid nozzle optimal for targeted partial humidification, sterilization, and deodorization.

The ultra-fine mist two-fluid nozzle "Quick Fogger" is a humidification system that does not wet the inside of air conditioning units. 【Features】 Significantly reduces air consumption High specifications with uniform particle size of 7.6 to 11.2 μm Easy setup in limited spaces Variety of flow sizes 【Details】 Spray volume: (Air pressure 0.3 MPa) Liquid = 1.0 to 4.5 L/h, Air = 30 to 40 L(normal)/min (Spray volume varies depending on siphon height.) Material: Body, cap = PP (polypropylene) Nozzle tip = SUS303 (Option: PTFE) Packing = fluororubber Connection: Air side, liquid side = Rc1/8 Dimensions: Total length 45.9 mm, maximum width 33.5 mm You can use a mounting hole compatible with M5 screws and nuts. Spraying Systems, a global brand of spray nozzles, offers nozzles suitable for various applications based on a proven track record of over 90,000 items. *For information about spraying nozzles, please download the PDF or contact us.

  • クゥイックフォッガー切り抜001.jpg
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air rotary hole cleaning nozzle, part number M735CH35-50-180G

Air rotary hole cleaning nozzle, part number M735CH35-50-180G

Eco-friendly cleaning that is gentle on the Earth, with 360-degree air spraying!

● For finishing various drilling processes This product cleans cutting chips and cutting fluids generated during the machining of blind holes and through holes. It rotates at high speed while injecting air from the tip of a slender pipe-shaped nozzle. Compared to conventional nozzles that inject air in one direction, it reduces the amount of air used. The length of the metal part at the nozzle tip is 50 millimeters (standard), and we offer nozzle diameters of 3.5 millimeters and 5 millimeters.

  • Stainless steel container
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dispensing/Spray Nozzle "DISPENSE & ATOMIZING Nozzle"

Dispensing/Spray Nozzle "DISPENSE & ATOMIZING Nozzle"

Optional nozzle for our high-speed electromagnetic valve "VHS Series." For dispensing: 10nL droplet ejection / For spraying: generates a fine mist with a hollow conical shape.

We provide nozzles that can achieve precise fluid dispensing or spraying. These nozzles are available in several different mounting styles and can be directly connected to the high-speed solenoid valve "VHS Series" or used with flexible tubing. When connected directly to the VHS valve, the flow between the valve sealing surface and the nozzle is minimized, improving the response time at the system level. The precision orifice incorporated into the dispensing nozzle allows for the application of accurate spherical droplets of approximately 10 nL, and by using multiple nozzles, applications in the milliliter range are also possible. The spray nozzles are available in both air-assisted and airless designs. The air-assisted nozzle achieves atomization with just 5 psi of liquid and air, while the airless nozzle achieves atomization with only 30 psi without the need for an external air source.

  • Atomizing Nozzle.jpg
  • Nozzles.jpg
  • Other cleaning machines
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle - High Blow Nozzle Mini

Nozzle - High Blow Nozzle Mini

Exhibits outstanding effectiveness when integrated into the system!

This is an announcement from Takezuna Manufacturing Co., Ltd. regarding the "High Blow Nozzle Mini."

  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UNITED Air Duster with Air Flow Adjustment Long Vent Nozzle

UNITED Air Duster with Air Flow Adjustment Long Vent Nozzle

Adjust the amount of blown air at hand according to the target object!

● Long vent nozzle type ● For blowing away cutting chips, dust, and moisture!! ● For blowing away cutting chips stuck in grooves ● For blowing away dust in narrow areas

  • Air Tools
  • Air Shower
  • Other cleaning tools
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Implementation of 1005 support SMT bond (dispenser) nozzle

Implementation of 1005 support SMT bond (dispenser) nozzle

If it is difficult to apply the bond for the 1005 chip, please consider it. Customizable bond nozzles available!!

Chip components are becoming smaller, and a bonding process for 1005 components is necessary. If there are any issues with the application using a standard bonding nozzle, we will manufacture a nozzle tailored to your requirements. Our company's wire electrical discharge machining equipment allows for fine hole processing. We can accommodate requests for the inner diameter of the bond application and hole pitch. <Features> ★ Pipe inner diameter: φ0.25mm and up ★ Pipe pitch: Can be adjusted as needed. ★ Stopper: Can accommodate tip sizes and special sizes. Type for 1005: Single point application, double point application Note: Depending on the characteristics of the bond, the size of the pipe may change. Please feel free to inquire if you have any requests. *For more details, please refer to the PDF file or feel free to contact us.

  • page4-1.jpg
  • page3-3.jpg
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reihler rotary tank cleaning nozzle (Model: 5TB series)

Reihler rotary tank cleaning nozzle (Model: 5TB series)

The high-performance solid jet spray with Lechler gear control effectively removes stubborn dirt!

The 5TB series, along with the 5TA series, is a tank cleaning nozzle suitable for the pharmaceutical and food and beverage industries. The high-performance solid jet spray, controlled by gears, effectively removes stubborn dirt. Additionally, it features high-quality surface treatment. *Lechler GmbH is a German spray nozzle manufacturer.*

  • Beverage Production Equipment
  • nozzle
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rehilar company's rotary tank cleaning nozzle (Model number: 500.186)

Rehilar company's rotary tank cleaning nozzle (Model number: 500.186)

Entry model nozzle for rotary tank cleaning!

The 500.186 series is an entry-level model for tank cleaning applications. It is particularly suitable for tank cleaning at around 1 meter using flat jet spray. *Lechler GmbH is a German spray nozzle manufacturer.*

  • nozzle
  • Water Hydraulic Equipment
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra Fine Bubble Generation Nozzle "UFB DUAL"

Ultra Fine Bubble Generation Nozzle "UFB DUAL"

Over 7,000 companies have implemented it nationwide. Just by installing the nozzle, you can achieve a comfortable life with ultra-fine bubbles throughout your home!

We handle the ultra-fine bubble generation nozzle 'UFB DUAL(TM)', which can be installed in Japanese water pipes. This nozzle generates ultra-fine bubble water and has passed water equipment certification and drinking water quality tests due to its patented technology. By installing it in your plumbing without changing your showerhead or washing machine, you can transform your entire household water supply into ultra-fine bubble water. 【Features】 ■ With just this one device, the entire building can be converted to ultra-fine bubbles ■ Almost no drop in water pressure, providing a stress-free experience ■ Ultra-fine bubbles are generated simply by flowing water *The installation results are as of September 2022. *For more details, please download the PDF or feel free to contact us.

  • Piping Materials
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra Fine Bubble Generation Nozzle "UFB DUAL"

Ultra Fine Bubble Generation Nozzle "UFB DUAL"

The nozzle diameter can be changed! Both water pressure and water flow are kept within 5%, allowing for stress-free use.

The "UFB DUAL" is a nozzle that can be installed in water supply pipes to generate ultra-fine bubbles simply by passing water or other liquids through it. It brings out the air components contained in the raw water within the nozzle, delivering them in a UFB state without allowing the bubbles to grow. By creating a circulation circuit, batch production is also possible. It significantly reduces flow rate decrease and pressure loss that occur when passing through the nozzle, enabling stress-free operation. 【Features】 ■ No need to introduce outside air during UFB production ■ Continuous production of UFB is possible ■ Minimal flow rate decrease and pressure loss ■ Material of the nozzle can be changed according to the environment ■ Diameter of the nozzle can be changed (13A to 150A) *For more details, please refer to the related links or feel free to contact us.

  • Water treatment equipment
  • Other water treatment equipment
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Rehila's MEMOSPRAY (Flat Jet Spray Nozzle)

Rehila's MEMOSPRAY (Flat Jet Spray Nozzle)

Spray nozzle that can store the installation position in 'memory'.

Typical Issues for Nozzle Users - Errors in fixing the position (angle) of the spray nozzle when replacing a worn nozzle - Tools are required for nozzle replacement - Time loss due to loss during nozzle replacement Previous Issues Ball joint spray nozzles are used in fields such as cleaning, degreasing, phosphating, and painting. To achieve optimal spray effectiveness, appropriate spray direction and angle are required. Especially after replacing the nozzle, the spray direction must be set back to the same position as before. This task consumes a significant amount of labor time. Additionally, if the nozzle's directional position is not correct, it produces low-quality products. Memospray is an essential product for solving this problem. This nozzle allows for installation and removal by simply twisting it with one hand during replacement. Furthermore, as indicated by the name "MEMO," the direction (angle) of the nozzle is fixed by the body.

  • nozzle
  • Water Hydraulic Equipment
  • nozzle
  • nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to nozzle

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.