Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.
151～180 item / All 180 items
Entry model nozzle for rotary tank cleaning!
The 500.186 series is an entry-level model for tank cleaning applications. It is particularly suitable for tank cleaning at around 1 meter using flat jet spray. *Lechler GmbH is a German spray nozzle manufacturer.*
A nozzle developed for the purpose of processing the edge portions at both ends in water drainage and drying lines for materials such as boards.
In the water drainage and drying line for flat materials (such as steel plates, resin rolls, glass, paper, etc.), slit-type air knives and air nozzles are mainly used. However, in this case, the air that hits the workpiece tends to flow along the surface, reducing its width towards the center, which resulted in insufficient treatment at both ends and edges. By placing the EX & EN series at both ends and using them in conjunction with the slit-type nozzles, it has become possible to solve this issue. 【Features】 ○ Effective injection length: 30mm ○ Nozzle specification: 0.3mm ○ Inlet: PS1/4” (internal thread) ○ Can be connected to a heater for generating hot air, allowing use with high-temperature hot air.
This is a nozzle-type static electricity removal device that adopts a high-frequency AC method to reduce contamination of the discharge needle and quickly eliminate static electricity in narrow spaces.
The static electricity removal device, ion nozzle "SPN-12," is a super compact ion nozzle. Its small size makes it suitable for deionization in narrow spaces. By adopting a high-frequency AC method, it has reduced particle adhesion to the discharge needle. The use of a fluororesin nozzle has improved ozone resistance. With the optional power controller, centralized control is possible. (Up to four SPN-11 units can be connected and controlled locally or by group.) For more details, please download the catalog or contact us.
Introducing the tank-type nozzle that is easy to carry with its handy design!
The "B15-K/C15-K/C15F-K/D15-K" is a nozzle for a cold fogging machine that allows for easy dispersion of chemical solutions into a tank by simply injecting compressed air from a compressor. It is sufficient to connect it with a compressor and air hose (no electrical wiring required). Equipped with a mixer, it can also handle wettable powders and is highly resistant to corrosion, making it durable and long-lasting. 【Features】 ■ Easy connection ■ Comes with a mixer, compatible with wettable powders ■ Handy type for easy portability ■ Highly resistant to corrosion, durable and long-lasting *For more details, please refer to the PDF document or feel free to contact us.
All made by cutting processing on a lathe! Introducing the nozzle that can be attached to the tip.
The "plasma nozzle" is a nozzle that is attached to the tip of a plasma cutting machine, which injects the arc. In the case of this product, a circular groove was processed inside a shape resembling an umbrella, and a fine hole was drilled in the center. Additionally, all manufacturing was done through cutting on a lathe. Please feel free to contact us when you need our services. 【Features】 ■ Wide range of processing from 2mm to lengths of 3m, and up to 400φ for round objects ■ From small lots of 1 piece to mass production ■ Cutting, deep hole processing, bending, and joining ■ Compatible with various workpieces using the five-axis composite machining center "DMU 65 monoBLOCK" ■ Cutting possible with water jet regardless of material *For more details, please download the PDF or feel free to contact us.
Selectable fine mist for cooling air conditioning
■Low Pressure Easy Mist Pump Set No pump or compressor needed, and no power required. Just connect to a water supply to create mist. Easy setup. All necessary parts for installation and connection are included. ■High Pressure Mist Pump Unit Generates fine mist around 20μm using a high-pressure pump and dedicated nozzle. For mist cooling, performances, and more.
Built-in check valve on the air side! Mist fan-shaped nozzle usable with both 1 and 2 fluid specifications.
The "Fan-Shaped Nozzle VVP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single-fluid and dual-fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to function as a single-fluid nozzle in the medium to high water flow range and as a dual-fluid nozzle in the low water flow range. It is a liquid pressurization type that supplies liquid to the dual-fluid nozzle. 【Features】 - Usable in both single-fluid and dual-fluid configurations - Single-fluid in medium to high water flow range, dual-fluid in low water flow range - Wide turn-down ratio (throttling ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Built-in check valve on the air side For more details, please contact us or download the catalog.
Compatible with multi-variety production! Mist fan-shaped nozzle usable with both 1st and 2nd fluid specifications.
The "Fan-shaped Nozzle DDRP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single fluid and dual fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single fluid nozzle in the medium to high water flow range and as a dual fluid nozzle in the low water flow range. It is a liquid pressurization type that supplies liquid to the dual fluid nozzle. 【Features】 - Usable in both single fluid and dual fluid configurations - Single fluid in medium to high water flow range, dual fluid in low water flow range - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Spray pattern thickness angle is wide at 60°, allowing for surface cooling For more details, please contact us or download the catalog.
Cleaning with effective flat jet nozzles. Explosion-proof specifications are also available.
The 566 series is equipped with an effective flat jet nozzle and uses PEEK material slide bearings. It is a nozzle suitable for FDA and EC No. 1935/2004, particularly used in the food and beverage industry. An ATEX version that meets explosion-proof standards is also available upon request. *Lechler GmbH is a German spray nozzle manufacturer.*
Lechler foam spray is possible! It can be used in corrosive environments.
The 500.191 series is designed for use in corrosive environments and is compliant with FDA and EC No. 1935/2004. This nozzle is capable of spraying foam. *Lechler GmbH is a German spray nozzle manufacturer.*
Ion nozzle with a sensor. The infrared sensor allows for static electricity removal only when necessary. The use of fluororesin nozzles improves ozone resistance.
The static electricity removal device, ion nozzle "SPN-11S," is an ion nozzle with a built-in sensor function. It can be automatically turned ON/OFF by an infrared sensor. Its compact size makes it suitable for deionization in narrow spaces. By adopting a high-frequency AC method, it reduces particle adhesion to the discharge needle. The use of a fluororesin nozzle improves ozone resistance. Sensor sensitivity and operating time can be set as desired. For more details, please download the catalog or contact us.
Achieving long lifespan! A simple integrated nozzle that is directly screwed into the pipe body.
The "Yamagata Distribution Nozzle UVVP" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. It is made of ultra-high molecular weight polyethylene, which offers excellent wear resistance. Its unique structure ensures a long lifespan, providing stable performance as a spray polishing nozzle for extended periods. This is a simple integrated nozzle that is directly screwed into the pipe body, making it ideal for use in industries such as machinery and electrical electronics. 【Features】 ○ Yamagata distribution nozzle ○ Simple integrated nozzle ○ Made of ultra-high molecular weight polyethylene ○ Long lifespan achieved through unique structure ○ Stable performance as a spray polishing nozzle For more details, please contact us or download the catalog.
Standard alumina type! Circular spray pattern with uniform flow distribution conical nozzle.
The "Uniform Distribution Nozzle / Standard Alumina Type JUXP-AL92" is a conical nozzle with a circular spray pattern and uniform flow distribution. It is a nozzle with a body and whirler that are sintered together, using an X-shaped whirler for rotation. It has a large foreign object passage diameter, making it less prone to clogging. The section from the whirler to the tip is made of high-purity alumina ceramic, providing excellent wear resistance. It is available in medium to large spray volumes. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Excellent wear resistance ○ Structure that is less prone to clogging ○ Made of alumina ceramic ○ Available in medium to large spray volumes For more details, please contact us or download the catalog.
Nozzles developed for high-speed water removal and drying lines for electric wires, wires, tubes, threads, rods, etc.
The conventional type is a porous structure with round holes or short slits arranged in a circular pattern, which had the problem of uneven processing resulting in striped patterns during high-speed water drainage and drying operations. However, this product allows for uniform processing by injecting air through evenly spaced gaps arranged in a circular pattern. 【Features】 ○ Can be connected to a heater for generating hot air and used with high-temperature hot air ○ A wide range of standard sizes available from a small diameter of Φ4 to a large diameter of Φ130 ○ Nozzle specification: 0.3mm ○ Inlet: Φ50 to 65 hose connection *We also manufacture non-standard large and small diameter sizes. For details, please contact us via catalog download or our website.
Nozzle with a mountain-shaped distribution pattern of spray that is strong in the center and gradually weakens towards both ends.
The "Wedge-Shaped Distribution Nozzle (Thin Type) CVVP" can generate a fan-shaped spray with a wedge-shaped flow distribution that is strong in the center and gradually weakens towards both ends. The material is S303 or S316. It features a fully threaded outer circumference for easy wall embedding in a one-piece structure. This coin-shaped nozzle is designed to be extremely thin, allowing it to be screwed into a shower pipe without protruding from the outer surface of the pipe, making nozzle arrangement in tight spaces easy. 【Features】 ○ Wedge-shaped distribution nozzle (thin type) ○ Spray pattern that is strong in the center and gradually weakens towards both ends ○ Coin-shaped with an extremely thin nozzle thickness ○ Easy nozzle arrangement in tight spaces ○ One-piece structure that allows for wall embedding For more details, please contact us or download the catalog.
Maintains minimal spray angle variation and uniform spraying! High turndown 1 fluid uniform fan-shaped nozzle.
The "Uniform Distribution Nozzle (High Turn Down) VVEP-HL" is a high turn down single fluid uniform fan nozzle that maintains a consistent spray even with changes in pressure, resulting in minimal variation in spray angle. It is particularly effective when precise control at low flow rates is desired. With a wide range of flow adjustment (turn down ratio), it is ideal for applications that require increasing or decreasing the flow rate based on the target. It features a spray pattern with uniform flow distribution across the entire area and a structure that allows for control at low flow rates. 【Features】 ○ High turn down single fluid uniform fan nozzle ○ Uniform flow distribution spray pattern across the entire area ○ Minimal variation in spray angle when changing spray pressure ○ Structure that allows for control at low flow rates ○ Suitable for applications that utilize varying spray flow rates For more details, please contact us or download the catalog.
Capable of generating fine mist! Spray pattern with a circular small flow cone nozzle.
The "Uniform Distribution Nozzle (Low Flow Spray / Disassemblable) K" is a small flow conical nozzle capable of generating fine mist with an annular spray pattern. The spray tip and closer are made of ceramic, and the entire section from the swirl chamber to the nozzle is formed from ceramic, providing excellent wear resistance. All models come standard with a strainer, making it ideal for use in industries such as pollution prevention, machinery, electrical and electronics, paper, pulp, printing, and food. 【Features】 ○ Small flow conical nozzle ○ Annular spray pattern ○ Ceramic formation from swirl chamber to nozzle ○ Excellent wear resistance ○ Capable of generating fine mist For more details, please contact us or download the catalog.
Hard to clog! The entire nozzle is made of alumina ceramic and is a hollow conical nozzle.
The "Uniform Distribution Nozzle (Medium Spray Volume Alumina Type) AP-AL92" is a hollow cone nozzle that can generate a hollow cone spray with a relatively fine particle diameter in an annular spray pattern. The entire nozzle is made of alumina ceramic and is an angle-type hollow cone nozzle that sprays at a right angle to the inflow direction. The spray is stable regardless of liquid pressure, and both the inlet and outlet sections have a structure that is resistant to clogging with a single hole. 【Features】 ○ The entire nozzle is made of alumina ceramic hollow cone nozzle ○ Stable spraying regardless of liquid pressure ○ Generates a hollow cone spray with a relatively fine particle diameter in an annular spray pattern ○ Resistant to clogging with a single hole at both the inlet and outlet sections ○ Sprays at a right angle to the inflow direction For more details, please contact us or download the catalog.
Difficult to drop the ball! A straight nozzle that generates a strong hitting power with ultra-fine rod flow.
The "Straight Nozzle (with Control Mechanism) SO-CM" is a straight nozzle that generates a strong impact of ultra-fine stream with a narrow and straight spray pattern. It is less likely to produce drips and allows for responsive control. The internal piston moves up and down with control air, enabling the ON/OFF of the spray. It is ideal for applications such as trimming of paper and asbestos slate, cutting of wood and food, localized cleaning of precision machine parts, injection of chemicals, deburring, and seasoning. 【Features】 ○ Narrow and straight spray pattern ○ Generates a strong impact of ultra-fine stream ○ ON/OFF spray control possible with control air ○ High responsiveness in spray control ○ Less likely to produce drips For more details, please contact us or download the catalog.
Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 100μm or less.
The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV" is a mist generation nozzle that can switch between two spray patterns: uniform and triangular distribution. It is a two-fluid fan-shaped nozzle that generates mist with an average particle diameter of less than 100μm. It is a liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It can produce two patterns: a uniform flow distribution across the entire area and a triangular distribution that is strong in the center and gradually weakens towards both ends, offering a wide range of flow adjustment. 【Features】 ○ Switchable between uniform and triangular distribution, two spray patterns ○ Minimum spray flow in two fluids ○ Compact type ○ Structure resistant to clogging ○ Spray angles of 45°, 80°, and 110° For more details, please contact us or download the catalog.
Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less.
The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV.S" is a space-saving, high-performance nozzle designed compactly from the BIM series of mist generation nozzles. It is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less. It is a suction type that does not require a liquid pressurization device, using compressed air to draw up and spray the liquid. The two-fluid nozzle consists of four parts: nozzle tip, core, cap, and adapter, providing an even flow distribution across the entire area. 【Features】 ○ Two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Even spray pattern with uniform flow across the entire area ○ No device required for liquid pressurization ○ Compact type ○ Spray angle of 80° For more details, please contact us or download the catalog.
"Stealth microbubbles" refer to microbubbles that are invisible and cannot be recognized by the naked eye.
We decided to conduct an experiment to see what happens when microbubbles are introduced into a rice field.
Metal one-piece! A single fan-shaped nozzle that generates an eccentric fan-shaped spray from the nozzle axis.
The "Eccentric Uniform Distribution Nozzle OVVEP" generates an eccentric fan-shaped spray from the nozzle axis, allowing for an even flow distribution across the entire spray pattern. It eliminates spray liquid accumulation when multiple nozzles are arranged. This integrated type does not require diagonal mounting of the nozzle. The material is S303 or B (brass), and it is a fully metal integrated nozzle. It is ideal for use in industries such as steel, electronics, paper, pulp, printing, food, and agriculture, forestry, and fisheries. 【Features】 - Eccentric spray pattern with uniform flow distribution across the entire area from the nozzle axis - Eliminates spray liquid accumulation when multiple nozzles are arranged - Integrated type that does not require diagonal mounting of the nozzle - Fully metal integrated nozzle - Material is S303 or B (brass) For more details, please contact us or download the catalog.
Fine mist generation small spray volume type! Spray pattern is a circular small spray volume hollow cone nozzle.
The "Uniform Distribution Nozzle (Low Volume Spray) KKBP" is a small volume conical nozzle with an annular spray pattern. It features a unique whirling design that allows for a large foreign object passage diameter, making it resistant to clogging while generating fine mist. There are two types of screw sizes: tapered male thread and parallel male thread. It has a compact design with fewer parts, consisting of two components: the nozzle body and the whirling component, which is removable for easy maintenance. 【Features】 ○ Conical nozzle for fine mist generation with low volume ○ Small volume conical nozzle with an annular spray pattern ○ Large foreign object passage diameter, resistant to clogging ○ Compact design with fewer parts ○ Removable whirling component for easy maintenance For more details, please contact us or download the catalog.
Ceramic nozzle! A simple integrated nozzle that generates a fan-shaped spray.
The "Yamagata Distribution Nozzle VP" can generate a fan-shaped spray with a Y-shaped flow distribution that is strong in the center and gradually weakens towards both ends. When overlapping the patterns at both ends during multiple nozzle arrangements, the flow distribution becomes uniform across the entire width. This is a simple integrated nozzle that uses ceramic at the nozzle tip and is directly screwed into the pipe body. The strainer (for metal body products only) is standard equipment for small flow products and can be removed. 【Features】 - Ceramic is used at the nozzle tip of the main body - Simple integrated nozzle - Strainer is standard equipment for small flow products and can be removed - The spray tip is made of ceramic and resin → The ceramic nozzle is molded with a durable engineering plastic For more details, please contact us or download the catalog.
Steam injection is also possible! An air nozzle that accommodates various injection volumes with chip replacement.
The "Fan-Shaped Nozzle (Disassemblable) VZ" is an air nozzle composed of three parts: a spray chip, a cap, and an adapter. Only the worn spray chip can be replaced, and the cap and adapter are compatible with standard fan-shaped nozzles (for liquids) in three sets. It can spray not only air but also steam. It is used in industries such as steel, machinery, electrical and electronics, paper, pulp and printing, food, and vehicles and transportation. 【Features】 ○ Compressor specification ○ Wide-angle spray (spray angle 90°) covers a large area ○ Various spray volumes can be accommodated by chip replacement ○ Steam spraying is also possible ○ Disassemblable type; made of metal For more details, please contact us or download the catalog.
Achieve high impact and high flow rate blowers even at low pressure! Significantly energy-saving compared to compressor air.
The "WindJet YBLW" is a compact air nozzle for blowers that enables high impact and high flow rates even at low pressure, thanks to its unique structure that allows for efficient air rectification. Switching from compressed air results in significant energy savings. Additionally, despite its flat and compact shape, it features a blow-off width of 53mm, and we also offer headers with nozzles arranged in parallel to accommodate longer lengths. 【Features】 ■ A fault design that allows air to escape even if objects come into contact with the nozzle's blow-off section ■ Lower power consumption compared to compressed air systems ■ Compatible with long and complex shapes using headers and adjustable hoses *For more details, please refer to the catalog. Feel free to contact us with any inquiries. Spraying Systems, a global brand for spray nozzles, offers a variety of nozzles tailored to different applications based on over 90,000 items of proven performance. *For information on spraying nozzles, please download the PDF or contact us.
Ceramic integrated nozzle! Sector nozzle with uniform flow distribution spray pattern.
The "Uniform Distribution Nozzle VEP" is a uniform sector nozzle that generates a fan-shaped spray with an even flow distribution across the entire spray pattern. The impact force per unit area is uniform. It is an integrated nozzle that uses ceramic in the spray tip section. The Seltim is a ceramic-resin spray tip molded from a robust engineering plastic. It is ideal for use in industries such as steel, machinery, electrical and electronics, printing, food, and vehicles and transportation. 【Features】 ○ Generates a fan-shaped spray with uniform flow distribution ○ Spray pattern with uniform flow distribution across the entire area ○ Integrated nozzle using ceramic in the tip section ○ Uniform impact force per unit area ○ Seltim is a ceramic-resin spray tip For more details, please contact us or download the catalog.
【Support for Electronic Component Procurement】 We support the urgent procurement of discontinued products (EOL products) and hard-to-obtain electronic components and semiconductors! We have established a thorough inspection system.
Are you looking for this model number product? ■Manufacturer: ABLIC ■Model Number: S-8261AAMMD-G2MT2U Owen Corporation quickly procures electronic components that have become difficult to obtain due to production discontinuation or delivery issues from a global network. We will definitely issue a quotation, so you can confirm the details before placing an order, giving you peace of mind. Veteran inspectors who have monitored market distribution inventory for over 20 years conduct inspections, and only products that pass are shipped. All delivered items come with an inspection report. 【Our Inspection System】 ■X-ray Inspection Non-destructive testing to check internal structures and detect counterfeit or inferior products. ■Microscope Careful examination of lead bending and any discrepancies in printed fonts. ■Digital Caliper Dimension measurement in 0.01mm increments to detect cleverly crafted counterfeits. ■Curve Tracer Displays the voltage and current characteristic waveforms between terminals on the screen to detect defective products. ★Please visit our website from the link below. ★You can view our company brochure from the download button below. ▼For other model numbers you can inquire about, please refer to the lineup below.
Best-selling Rehiller air nozzle FL-600E's sister product, ultra-compact round type, made of stainless steel SUS316L (5mm type).
Lechler multi-channel jet (air nozzle) The air emitted is laminar, allowing not only for powerful impact force but also for reduced noise levels. Additionally, by utilizing laminar flow, the amount of air consumed can also be minimized. In other words, it is an energy-saving product. The blow pattern is straight (7mm wide). *Lechler GmbH is a German spray nozzle manufacturer.*
