nozzleのメーカーや取扱い企業、製品情報、参考価格、ランキングをまとめています。
イプロスは、 製造業 ・ BtoB における情報を集めた国内最大級の技術データベースサイトです。

nozzle - メーカー・企業285社の業務用製品ランキング | イプロスものづくり

更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

nozzleのメーカー・企業ランキング

更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. null/null
  2. スプレーイングシステムスジャパン Tokyo//Industrial Machinery
  3. ティックコーポレーション 本社 Tokyo//Machine elements and parts
  4. 4 null/null
  5. 5 イハラサイエンス Tokyo//Machine elements and parts
企業ランキングへ

nozzleの製品ランキング

更新日： 集計期間:May 27, 2026～Jun 23, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。

  1. FlowX series イハラサイエンス
  2. GCN type grease cut nozzle (liquid dripping and stringing prevention nozzle) シマ技研開発　Shima Giken Kaihatsu (SHIMA TECH)
  3. Remove dirt and chips from the tap hole! Tornado Air Nozzle Ando Co.,Ltd.
  4. 4 Nano Bubble Generation Nozzle [AUFB Ark] 荒川工業
  5. 5 We will exhibit at the Monozukuri World Tokyo - Mechanical Components Technology Exhibition!

nozzleの製品一覧

1051～1080 件を表示 ／ 全 1417 件

表示件数
Spray nozzle wide-angle circular irrigation type EX5-WL TYPE

Spray nozzle wide-angle circular irrigation type EX5-WL TYPE

No internal wings, no clogging! Introducing the spray nozzle.

This product is a spray nozzle that disperses water in a wide-angle circular pattern with a spiral structure. It can be used for cleaning air, gas, etc., as well as in wastewater treatment facilities such as sludge incineration and wastewater disposal facilities. There are no blades inside, preventing clogging. 【Features】 - No blades inside, preventing clogging - Particles are slightly smaller than those of the "EX4 type" *For more details, please refer to the PDF document or feel free to contact us.

  • image_20.png
  • nozzle
  • Spray tower
  • Piping parts
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Spray Nozzle Liquid Pressure Circular Spray Type EX5 TYPE

Spray Nozzle Liquid Pressure Circular Spray Type EX5 TYPE

Introduction of a spray nozzle that allows watering solely by liquid pressure, suitable for humidifying, moisture control, and air conditioning equipment!

This product is a spray nozzle that sprays a small amount of liquid using hydraulic pressure. Thanks to our unique blades and internal structure, it sprays in a ring shape. To ensure that the spraying is done solely by hydraulic pressure, the particles of this type are minimized. 【Features】 ■ Sprays a small amount of liquid using hydraulic pressure ■ Sprays solely by hydraulic pressure ■ Our unique blades and internal structure *For more details, please refer to the PDF document or feel free to contact us.

  • image_22.png
  • Other machine elements
  • nozzle
  • Piping parts
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Spray nozzle narrow angle flat spray type EX6-M TYPE

Spray nozzle narrow angle flat spray type EX6-M TYPE

Narrow angle (60°) flat spray type! Spray nozzle without internal vanes that does not clog.

This product is a spray nozzle that sprays water in a narrow angle flat pattern due to its special outlet shape and the absence of internal blades. It provides stable water distribution across a wide range of pressure levels. The lack of internal blades prevents clogging. At 0.2 MPa, it sprays in a narrow angle flat pattern of 60°, and as the pressure increases, the angle widens. 【Features】 - No internal blades, preventing clogging - Strong impact with coarse particles - At 0.2 MPa, it sprays in a narrow angle flat pattern of 60°, and the angle widens as the pressure increases - Stable water distribution across a wide range of pressure levels *For more details, please refer to the PDF document or feel free to contact us.

  • image_30.png
  • Other machine elements
  • nozzle
  • Piping parts
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Spray Nozzle Narrow Angle Flat Watering Type EX6-N TYPE

Spray Nozzle Narrow Angle Flat Watering Type EX6-N TYPE

Introducing the high-impact, coarse particle narrow-angle (30°) flat spray nozzle!

This product is a narrow-angle flat spray nozzle that provides stable spraying over a wide range of pressure. It sprays at a narrow angle of 30° at 0.2 MPa. There are no internal vanes, preventing clogging. 【Features】 - No internal vanes, preventing clogging - Strong impact with coarse particles - Sprays at a narrow angle of 30° at 0.2 MPa - Stable spraying over a wide range of pressure *For more details, please refer to the PDF document or feel free to contact us.

  • image_01.png
  • Other machine elements
  • nozzle
  • Piping parts
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Spray Nozzle Flat Watering Type S TYPE

Spray Nozzle Flat Watering Type S TYPE

Stable spraying over a wide range of pressure! A spray nozzle that allows for the replacement of just the nozzle tip.

This product is a low-flow type "EX6 model" spray nozzle that sprays water flatly due to its special outlet shape. It can be disassembled into the nozzle tip, body, cap, and strainer. There are various performance nozzle tips available for both water flow rate and spray angle. It provides stable spraying across a wide range of pressure levels. 【Features】 ■ Can be disassembled into nozzle tip, body, cap, and strainer ■ Only the nozzle tip can be replaced ■ Various performance nozzle tips are available for both water flow rate and spray angle ■ Stable spraying across a wide range of pressure levels *For more details, please refer to the PDF document or feel free to contact us.

  • image_07.png
  • Other machine elements
  • nozzle
  • Piping parts
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Spray Nozzle Fog Jet Circular Full Coverage Type FG4

Spray Nozzle Fog Jet Circular Full Coverage Type FG4

Dust collection, dust removal, and dust prevention equipment, as well as fire prevention equipment, are suitable! It can spray water over a wide area.

This product is a fog jet circular full coverage spray nozzle capable of wide-area spraying. It can spray in a circular pattern using a combination of seven EX4 type nozzles, allowing for a high flow rate despite the small particle size. It can be used for cooling the atmosphere in various tower tanks and containers, container cleaning, dust collection, dust removal, dust prevention equipment, and disaster prevention equipment. 【Features】 - Small particle size but capable of high flow rate - Capable of wide-area spraying *For more details, please refer to the PDF document or feel free to contact us.

  • 2020-11-13_09h18_23.png
  • Other machine elements
  • nozzle
  • Other cleaning machines
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Spray Nozzle Micromizer (Two-Fluid Spray Nozzle)

Spray Nozzle Micromizer (Two-Fluid Spray Nozzle)

For air conditioning and temperature control equipment such as humidification, moisture control, and cooling! Mixing air and liquid at high speed to spray fine particles.

This product is a micromizer (two-fluid spray nozzle) that atomizes liquid into fine particles and sprays uniform particles. The spray particle size can be adjusted by changing the mixing ratio of air and liquid. It can be used with all types of pressurized systems. It can be utilized in applications such as air conditioning and temperature control equipment for humidification, moisture control, and cooling, as well as in environmental equipment for gas cooling, desulfurization, denitrification, and dust prevention. 【Features】 ■ Atomizes liquid into fine particles and sprays uniform particles ■ Spray particle size can be changed by adjusting the mixing ratio of air and liquid *For more details, please refer to the PDF document or feel free to contact us.

  • 2020-11-13_09h46_27.png
  • 2020-11-13_09h46_36.png
  • 2020-11-13_09h46_43.png
  • Other machine elements
  • nozzle
  • Other cleaning machines
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Disaster prevention, cleaning, humidifying, watering, and cooling spray nozzle.

Disaster prevention, cleaning, humidifying, watering, and cooling spray nozzle.

We are sure to have a spray nozzle that meets your needs! We select based on material, diameter, spray pattern, flow rate, and intended use.

For over 65 years, we have been adopted in various applications such as disaster prevention, cooling, and cleaning in the shipbuilding and land plant industries (including petrochemicals, papermaking, steel, and food processing). 【Spray Shapes】 We offer a lineup of products tailored to your usage purposes, including "ring spray type," "circular full-area spray type," "flat spray type," "rod-shaped straight type," "mist spray," and "full-circle spray." 【Diameter】 Since we are widely used in many plant industries, we can accommodate from small diameters to large diameters. 【Materials】 PP, PTFE, PVC, SUS304, SUS316, SUS316L, C3604B.

  • SPRAY０１.png
  • SPRAY０２.png
  • SPRAY０３.png
  • nozzle
  • valve
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Mitsubasan Kowa Wide Washer Double Black

Mitsubasan Kowa Wide Washer Double Black

We have a variety of automotive parts and accessories available!!

The diffusion shower spreads out in a fan shape on the front windshield, covering a wider area.

  • Other Auto Parts
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Mitsubasan Kowa Wide Washer Double Silver

Mitsubasan Kowa Wide Washer Double Silver

We have a variety of automotive parts and accessories available!!

The diffusion shower spreads out in a fan shape on the front windshield, covering a wider area.

  • Other Auto Parts
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
TAIFUJet <Flat Type> / IKEUCHI Co., Ltd.

TAIFUJet <Flat Type> / IKEUCHI Co., Ltd.

Achieve energy savings with high impact and powerful blow! Air nozzle with excellent quietness.

"TAIFUJet (Taihu Jet) <Flat Type>" is a uniquely designed flat air nozzle that evenly sprays air. It is a compressor type with a maximum operating pressure of 0.7 MPa. The material is PPS, with a weight of 30g and a heat resistance temperature of 80°C, achieving a noise level of 77 dBA (at 0.3 MPa). In addition to the resin models TF-F24, TF-F42, TF-FS42, and TF-F121, we offer a wide range of metal models such as TF-FS42 and TF-F50. [Features] ■ Unique design that evenly sprays air ■ High impact and powerful blow for energy saving ■ Excellent quietness ■ Compressor type *For more details, please download the PDF or feel free to contact us.

  • Drying Equipment
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
8-channel nozzle for ELISA washing using gravity drop method for cleaning solution - Immuno Nozzle 8

8-channel nozzle for ELISA washing using gravity drop method for cleaning solution - Immuno Nozzle 8

Cleaning PEEK nozzle for 8-channel ELISA plates. Liquid dispensing and stopping can be done with a single thumb action. Videos are currently being streamed on our company website!

This is a new product for microplate washing with an 8-channel nozzle that improves the shortcomings of the previously difficult-to-use ImmunoWash8. It features a grip design for easy handling, and liquid stopping is a one-touch operation with just a push of the thumb. It allows for the delivery of washing solution to the plate using only gravity from a height of 30 cm. We offer two types: one for high flow using gravity (a competitor to ImmunoWash8) and another for high-speed using a pump. The gravity discharge Immuno Nozzle 8Z can accommodate pipette tips, eliminating concerns about contamination. It provides fast liquid discharge even with a height difference of 30 cm. The high-speed nozzle is made of PEEK and has an outer diameter of 1.6 mm, making it ideal for cleaning difficult-to-wash magnetic beads. Using an optional pump and valve bottle set makes microplate washing even easier. It is highly recommended for the cleaning of complex and precision-demanding ELISA reactions. Each of the 8-channel nozzles is removable and can be swapped with plugs to accommodate 24-well plates, 6-well plates (4-channel, 2-channel), and other plates. Additionally, all parts are screw-type and can be easily detached, making nozzle cleaning simple. Measures against clogging are also thoroughly addressed.

  • Other cleaning machines
  • Plastic utensils and containers
  • Other physicochemical equipment
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Hand-tightening type dispensing nozzle made of sterilizable PEEK in a handy lure shape.

Hand-tightening type dispensing nozzle made of sterilizable PEEK in a handy lure shape.

This is a PEEK-made lure nozzle (needle). It has high chemical resistance and can handle both pressurization and depressurization. It is convenient for magnetic bead washing and column elution.

This is a PEEK-made lure nozzle that can be used for various purposes. It has high chemical resistance and heat resistance due to its PEEK material. It features a handy connector part that allows for sealing within the lure needle configuration, enabling nozzle (needle) operation during pressurization and depressurization by screwing it into the cap by hand. Of course, it can also be used as a dispensing nozzle. It demonstrates excellent functionality for applications such as liquid separation and collection utilizing pressurization and depressurization. Being made of resin, it is ideal for protein purification in disposable columns and spin columns, as well as for cleaning processes with magnetic beads. When combined with our vacuum manifold, a simple separation system can be created. The price is reasonable, and we offer various lengths and diameters of nozzles. It provides outstanding effectiveness as a needle for eluting proteins from columns.

  • Pipe Fittings
  • Analytical Equipment and Devices
  • Plastic utensils and containers
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
8-channel washing nozzle for ELISA with dual liquid selection discharge - Immuno Nozzle 8A

8-channel washing nozzle for ELISA with dual liquid selection discharge - Immuno Nozzle 8A

A new nozzle for plate cleaning has arrived! One-touch control to stop the discharge of the two liquids at the faucet. Ideal for cleaning plates with two types of liquids: cleaning solution and pure water.

We have great news for everyone who has been using the Immuno Nozzle and MultiWasher series for cleaning microplates. It is very convenient for users who want to wash microplates with two types of cleaning solutions (for example, a cleaning solution and pure water). The Immuno Nozzle 8A has been significantly upgraded, allowing you to control the dispensing and stopping of the liquid with a faucet at your fingertips. With the new W faucet, you can easily control the dispensing and stopping of the two liquids. In ELISA, the residue of the cleaning solution in the wells often becomes a problem. However, there haven't been many effective ways to easily switch between the cleaning solution and pure water to enhance the cleaning of the plates. The newly launched Immuno Nozzle 8W greatly alleviates such concerns. It features a W faucet on the grip, allowing you to control the dispensing and stopping of the two liquids with just your thumb. This makes it easy to clean the wells with pure water after using the cleaning solution. We are currently running a one-week free rental campaign, so why not give it a try?

  • Other cleaning machines
  • Plastic utensils and containers
  • Dispenser
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
吸引。吐出が同時にできるWノズル　WNozzle

吸引。吐出が同時にできるWノズル　WNozzle

W吐出・W吸引も可能な2重ノズル！目的に応じて吸引・吐出機能を使用できます。ノズル材質はPEEK、接続はハンディコネクタです。

『WNozzle ユニット』は、吸引と吐出の両方が可能な洗浄ノズルです。 液面を一定にしての洗浄が可能で、全てPEEK製のため耐薬品性が あります。 また配置の洗浄・容器の洗浄など、いろいろな用途にご使用頂けます。 ノズルは簡単に取り外しが可能で、長さも選択が可能です。 【特長】 ■PEEK製 ■取り外しが簡単 ■ノズルの長さが選べる ■2重ノズルとしても利用可能 ※詳しくはカタログをご覧頂くか、お気軽にお問い合わせ下さい。

  • nozzle
  • Water bottle and nozzle
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
8-channel ELISA plate washing nozzle for gravity-fed discharge of cleaning solution

8-channel ELISA plate washing nozzle for gravity-fed discharge of cleaning solution

An 8-channel nozzle for microplate cleaning utilizing height differences. Liquid control is easy with the faucet at hand. Disposable tips can be attached, allowing for cleaning at high flow rates.

This is an 8-channel nozzle for microplate cleaning. Although controlling the conventional liquid was difficult with the 8-channel nozzle, it has now become possible to control the cleaning solution with a simple operation of opening and closing the hand valve. The material is PEEK and it is detachable, making cleaning and maintenance easier. It is now possible to attach disposable tips to the nozzle's tip, which has the following features: - Cleaning with less liquid is possible - High flow rates can be achieved with minimal height differences We encourage you to give it a try.

  • Other cleaning equipment
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Processed Parts Performance] Ejector Nozzle

[Processed Parts Performance] Ejector Nozzle

Introduction of achievements in wire cutting and electrical discharge machining parts! From one piece of various types and small quantities! We will provide a quote for processed parts in as little as half a day.

Agency Assist has a track record in processing for prototype and development fields across various industries. We can handle a wide range of materials, including aluminum, iron, stainless steel, brass, and resin. This time, we would like to introduce our wire cut/discharge machined part, the "Ejection Nozzle." 【Features】 -------------------------------------------------------------- Part Name: Ejection Nozzle Material: Stainless Steel (SUS316) Processing Method: Wire Cut/Discharge Machining Size: φ42mm × L150mm Notes: Fine hole 0.6mm Application: Ejection nozzle for nitrogen trifluoride -------------------------------------------------------------- "Features of Agency Assist" - We provide estimates for processed parts in as little as half a day. - We accommodate everything from single-item processing to small lots of various types. - We handle everything from surface treatment to hardening, polishing, and precision inspection. From metals to resins, trust us with your cutting processing needs for prototype and development parts. ☆ Please feel free to contact us for a preliminary estimate! ☆

  • Processing Contract
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Precision ground processed products - Gauge "Nozzle"

Precision ground processed products - Gauge "Nozzle"

This is a nozzle used to dispense adhesive when attaching the television screen to the main body.

This is a nozzle used to dispense adhesive for attaching the television screen to the main body. Ida Manufacturing Co., Ltd. specializes in high-precision machining, automotive piston rings, oil seal molds, jig parts, and a wide variety of grinding processes, as well as general machining and assembly. We are committed to maintaining strict quality and delivery deadlines. 【Features】 ○ Nozzle used to dispense adhesive for attaching the television screen to the main body. For more details, please contact us or download the catalog.

  • others
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Resin-made long nozzle for air blow.

Resin-made long nozzle for air blow.

For air blowing work in narrow or recessed areas. Made of ultra-lightweight PP resin.

The long nozzle is made of ultra-lightweight (7g) PP resin, which is difficult to scratch the target object even when in contact. It is used for air blowing operations in narrow or recessed areas, such as air injection during packaging and packaging processes. For more details, please download the catalog or contact us.

  • nozzle
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Coolant check nozzle [Stable hit rate! Minimal liquid dripping!]

Coolant check nozzle [Stable hit rate! Minimal liquid dripping!]

Why not change the nozzle to eliminate time loss?

Ihara's coolant check nozzle is a nozzle developed to solve common problems that occur in machine tools. It not only allows for concentrated one-point discharge to the desired area, but also stops the discharge immediately when turned off, resulting in minimal liquid dripping. For more details, please download the materials or feel free to contact us.

  • 図2.png
  • 28.jpg
  • nozzle
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
COW cleaning nozzle

COW cleaning nozzle

A nozzle that moves in multiple directions and rotates targets the sediment, accumulated sludge, and debris in oil storage tanks! Introducing a high-pressure cleaning device.

● This is a device that cleans sludge and debris that has settled and accumulated on the inner surface of oil storage tanks using high pressure. ● Cleaning solution is sprayed from the nozzle tip to dissolve the deposits. ● The spray distance of the cleaning solution reaches approximately 20 meters at a supply pressure of 0.7 MPa. ● To avoid explosion accidents caused by vaporized gases inside the tank, all rotation and motion control is managed by air, with no electricity used at all. ● The nozzle tip rotates in both horizontal and vertical directions simultaneously on two axes, allowing for more efficient spraying of the cleaning solution over a wider area. ● The angles of the upper and lower nozzles can be limited to specific ranges, such as 135 degrees upward or 45 degrees downward, enabling targeted spraying. ◎ For more details, please contact us.

  • Other cleaning machines
  • Power Transmission Equipment
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Bubbling nozzle

Bubbling nozzle

Bubbling nozzle / Aeration nozzle

This is a bubbling nozzle using laminated sintered metal mesh. By using laminated sintered metal mesh, the pores are made uniform, and additionally, the strength can be ensured due to the laminated sintering process. Since it can be manufactured thinner than sintered metal, it is expected to achieve weight reduction and minimize pressure loss. Shapes that are difficult to process with sintered metal can also be made possible by using laminated sintered metal mesh.

  • filter
  • Mixer/agitator
  • Food Processing Equipment
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
In development: Microbubble generation nozzle using sintered metal

In development: Microbubble generation nozzle using sintered metal

Developing a microbubble generation nozzle using a sintered metal filter element. Gas piping! Automatic liquid suction → No pump needed! No high-pressure pump needed!

At Sintering.com, we are focusing on micro-bubbling as our top priority and advancing its development. Micro-bubbling does not simply occur by passing through fine pores; rather, if the bubbles only pass through small holes, they do not become microbubbles. On the contrary, this leads to significant pressure loss and a marked decline in performance. Therefore, we are embarking on the development of microbubble generation nozzles using sintered metals, combining this with the metal processing technology that has been the foundation of our company since its inception. Many nozzles currently on the market circulate water (liquid) through piping using pumps, and further high-pressure pumps are employed. This naturally incurs equipment costs and requires installation space. Additionally, piping with water (liquid) increases the risk of leaks, necessitating attention to the surrounding environment. High-pressure pumps can be noisy, and noise control measures may be required in some cases. At Sintering.com, we are developing micro-bubbling based on gas piping and are working on a user-friendly micro-bubbling nozzle that minimizes user equipment by adding an automatic suction function for the solution (liquid) directly to the nozzle, eliminating the need for circulation pumps and high-pressure pumps.

  • Other cleaning machines
  • Plating Equipment
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Nozzle

Nozzle

The material is ultra-hard alloy, non-magnetic ultra-hard alloy! We manufacture in a single round shape with hole sizes from φ0.08 and above.

We would like to introduce the "nozzles" handled by Sanwa Creation Co., Ltd. These are precision nozzles made of cemented carbide, primarily used for electronic component suction nozzles and sealing nozzles. We can manufacture round shapes with hole diameters from φ0.08 and are happy to discuss elliptical or irregular shapes as well. 【Specifications】 ■ Material: Cemented carbide, non-magnetic cemented carbide We also have a track record of manufacturing with other materials such as ceramics and SUS! *For more details, please refer to the related links or feel free to contact us.

  • nozzle
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Parts and Tools] Gas Burner Nozzle

[Parts and Tools] Gas Burner Nozzle

This is a gas burner nozzle made of special stainless steel.

【Material】Special stainless steel 【Processing method】NC lathe and milling 【Size】Φ180×50 ●For more details, please download the catalog or contact us.

  • nozzle
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
[Processing Example] Fine Processing of Platinum (Pt 90%, Au 10%)

[Processing Example] Fine Processing of Platinum (Pt 90%, Au 10%)

Platinum is suitable for making high-purity glass! We can accommodate up to 500 pieces per month.

Here is an example of a nozzle for glass equipment that has undergone fine processing with platinum. When glass is heated and refined, it tends to absorb metallic components, but platinum has the least absorption. The outer diameter of the shaft is φ0.2mm, which is less than half the thickness of a mechanical pencil lead (0.5mm). The tip has a hole with an inner diameter of φ0.15mm, and the wall thickness is 0.025mm. If you imagine a thickness less than one-third of a regular mechanical pencil, you can understand how small it is. Additionally, the φ0.15mm section is about 3mm long and connects to a φ1mm hole on the opposite side. Our company can also enhance the surface roughness of the inner surface through polishing. [Case Overview] ■ Nozzle Shape ■ Outer Diameter 0.2mm, Inner Diameter 0.15mm, Wall Thickness 0.025mm ■ Through hole of 1mm on the opposite side *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Contract
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Nozzle for 3D Printers | FFF Method | 'DIANOZ'

Nozzle for 3D Printers | FFF Method | 'DIANOZ'

The 'DIANOZ', a nozzle for 3D printers equipped with diamond chips, developed and patented by Gühring, which has been expanding globally from Germany for over 125 years.

The innovative nozzle for 3D printers with a diamond chip, 'DIANOZ', in FFF (Fused Filament Fabrication) technology ensures uniform material extrusion and smoothens the surface of components during printing. 【Ultra wear resistance for high-friction filaments】 - Capable of continuous extrusion of high-difficulty materials such as CFRP, GFRP, ceramics, and high-temperature filaments for extended periods without the need for nozzle replacement, enabling large parts and mass production. 【High print quality】 - The high thermal conductivity of diamond allows for uniform filament flow, and the ironing effect at the nozzle tip creates a smooth surface. 【Improved process reliability】 - Eliminates process interruptions due to nozzle replacement, prevents uneven layering caused by nozzle wear, and mitigates increased energy costs due to temperature drops. 【High cost-effectiveness】 - Reduces the number of nozzles purchased and labor costs associated with maintenance and replacement, decreasing extra energy costs related to temperature settings. *For more details, please refer to the PDF document or feel free to contact us.

  • Other work tools
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Collection of Examples of Industrial Straw Production: Nozzle Applications

Collection of Examples of Industrial Straw Production: Nozzle Applications

Cost reduction and miniaturization are possible! Examples such as beer server nozzles are included!

This document is a collection of case studies on the production of industrial straws for nozzle applications. It introduces various types of nozzles, including "spray nozzles" that serve as extended nozzles for injection ports and pipes that draw liquid from containers, as well as "pump nozzles" that extend the nozzle section and function as suction pipes. Industrial, medical, and various industrial straws are utilized as alternative materials for thin-walled pipes and tubes. We encourage you to read it. [Featured Cases] ■ Spray Nozzle ■ Pump Nozzle ■ Beer Server Nozzle *For more details, please refer to the PDF document or feel free to contact us.

  • nozzle
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Precision Machining Case Study of Nozzles in the Automotive Industry

Precision Machining Case Study of Nozzles in the Automotive Industry

Processing and treatment are carried out using lathes, EDM wire, and die-sinking discharge. Examples of production for the automotive industry.

WTM Corporation has a track record of procuring precision machined parts of Japanese quality from overseas for 18 years. We respond with sincerity to "a variety of products, from one piece," managing everything from procurement sources to processes and inspections in a comprehensive manner. This time, we would like to introduce a case study of nozzles for the automotive industry. The processing and treatment were carried out using lathes, EDM wire, and die-sinking discharge. The size is 24×10×32.3mm, and the material is SKH51 (HRC60-62). 【Project Overview】 - Product Name: Nozzle - Material: SKH51 (HRC60-62) - Size: 24×10×32.3mm - Processing/Treatment: Lathe, EDM wire, die-sinking discharge - Industry: Automotive < WTM Supporting Solutions for Manufacturing Challenges > For more details, please view our company brochure by clicking on "Download Catalog" below, or feel free to contact us.

  • 企業：WTM
  • 価格：Other
  • Processing Contract
  • Other machine elements
  • Other contract services
  • nozzle

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

nozzleに関連する検索キーワード

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.