Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 11, 2026～Mar 10, 2026
This ranking is based on the number of page views on our site.
61～90 item / All 124 items
For various office furniture. The double slide type with the highest allowable load capacity.
The double slide rail ND160 has the largest allowable load among the three members in the double slide type. It is widely used in various office furniture. For more details, please contact us or refer to the catalog.
The double slide type with the highest allowable load among the three members.
The double slide rail ND160-C3 has the highest allowable load among the three members in the double slide type. It can be pulled out by releasing the disconnect spring attached to the inner member, and during storage, it automatically releases with a force above a certain pressure in a specific direction. For more details, please contact us or refer to the catalog.
Even if the installation accuracy deteriorates, it can be restored to its original precision by adjusting the level.
The material of the bed, which is the foundation of the machine, has traditionally been made of cast iron because it easily allows for the creation of complex shapes. The cast structure can restore its original precision through leveling adjustments, even when changes in the floor surface or aging occur that degrade installation accuracy. The efforts and struggles of our predecessors are evident in the structure that takes advantage of the characteristics of cast iron, making it easy to process, able to withstand weight, and resilient to changes. It is said that cast iron, especially when aged or seasoned, experiences less change. Conversely, it is not an exaggeration to say that older machines hold more value. By maintaining a sturdy bed foundation and retrofitting it with modern control devices, the precision of the modified machines is truly remarkable.
Even if the installation accuracy deteriorates, it can be restored to its original precision by making level adjustments.
The material of the bed, which is the foundation of the machine, was mainly made of cast iron because it allows for the creation of complex shapes. The cast iron structure can restore its original precision through leveling adjustments, even if the installation accuracy deteriorates due to changes in the floor or aging. The efforts and struggles of our predecessors are evident in the design that takes advantage of the properties of cast iron, making it easy to process, able to withstand weight, and resilient to changes. It is said that cast iron, especially when aged or seasoned, undergoes less change. Conversely, it is not an exaggeration to say that older machines hold more value. By maintaining a sturdy bed foundation and retrofitting it with modern control devices, the precision of the modified machines is truly remarkable.
Even if the installation accuracy deteriorates, it can be restored to its original accuracy by adjusting the level.
The material of the bed, which is the foundation of the machine, is primarily made of cast iron because it easily allows for the creation of complex shapes. The cast iron structure can restore its original precision through leveling adjustments, even when changes in the floor surface or aging occur that degrade installation accuracy. The efforts and struggles of our predecessors are evident in the structure that takes advantage of the properties of cast iron, making it easy to process, capable of withstanding weight, and resilient to changes. It is said that the more aged or seasoned cast iron is, the less it changes. Conversely, it is not an exaggeration to say that older machines hold more value. By maintaining a solid bed foundation and retrofitting it with modern control devices, the precision of the modified machines is truly remarkable.
Even if the installation accuracy deteriorates, it can be restored to its original precision by adjusting the level.
The material of the bed, which is the foundation of the machine, was mainly made of cast iron because it allows for the easy creation of complex shapes. The cast iron structure can restore its original precision through leveling adjustments, even if the installation accuracy deteriorates due to changes in the floor or aging. The efforts and struggles of our predecessors are evident in the structure that takes advantage of the properties of cast iron, making it easy to process, able to withstand weight, and resistant to changes. It is said that the more aged or seasoned cast iron is, the less it changes. Conversely, it is not an exaggeration to say that older machines hold more value. By maintaining a solid bed foundation and retrofitting it with modern control devices, the precision of the modified machines is truly remarkable.
Even if the installation accuracy deteriorates, it can be restored to its original precision by adjusting the level.
The material of the bed, which is the foundation of the machine, has traditionally been made of cast iron because it is easy to create complex shapes. The cast iron structure can maintain its original precision even if the installation accuracy deteriorates due to changes in the floor or aging, as long as leveling adjustments are made. The characteristics of cast iron allow for easy processing, weight resistance, and adaptability to changes, reflecting the hard work and efforts of our predecessors. It is said that cast iron, especially when aged or seasoned, undergoes less change. Conversely, it is not an exaggeration to say that older machines hold more value. By maintaining a solid bed foundation and retrofitting it with modern control devices, the precision of the modified machines is truly remarkable.
Even if the installation accuracy deteriorates, it can be restored to its original precision by adjusting the level.
The material of the bed, which is the foundation of the machine, has traditionally been made of cast iron because it allows for the creation of complex shapes. The cast iron structure can maintain its original precision even when the floor surface changes or when aging occurs, as long as level adjustments are made. The characteristics of cast iron enable it to be easily processed, withstand weight, and endure changes, reflecting the hard work and efforts of our predecessors. It is said that the more seasoned or aged the cast iron, the less it changes. Conversely, it is not an exaggeration to say that older machines are more valuable. By maintaining a solid bed foundation and retrofitting it with modern control devices, the precision of the modified machines is truly remarkable.
Dealing with a unique approach based on years of experience!
The remarkable development of electric control devices has made high-speed operations with fast sliding speeds possible. However, the sliding parts cannot keep up with the friction coefficient of metals, necessitating a change to materials with lower friction coefficients. Depending on the application, LM guides, liner bearing attachments, and coatings such as SKC and Moglice are used, each with its own characteristics. Among these, I believe that the attachment of liner bearings (product name: Tarkaite), which are mechanically rigid and can easily restore precision by replacing them when worn, is quite common.
It is used as a simple reciprocating slide, emphasizing wear resistance.
It can withstand impacts from flying debris such as cutting powder and is often used in areas with harsh conditions. It can endure heavy loads through surface contact and is used in heavy cutting applications.
Dealing with it in a unique way based on years of experience!
The remarkable development of electric control devices has made high-speed operations with fast sliding speeds possible; however, the sliding parts cannot keep up with the friction coefficient of metal against metal, necessitating a change to materials with a lower friction coefficient. Depending on the application, LM guides, liner bearing attachments, and coatings such as SKC and Moglice are used, each with its own characteristics. Among these, the attachment of liner bearings (product name: Tarkaite), which are mechanically rigid and can easily restore precision by replacing them when worn, is likely the most common.
Responding with a unique approach based on years of experience!
The remarkable development of electric control devices has made high-speed operations with fast sliding speeds possible; however, the sliding parts cannot keep up with the friction coefficient of metals, necessitating a change to materials with lower friction coefficients. Depending on the application, LM guides, liner bearing attachments, and coatings such as SKC and Moglice are used, each with its own characteristics. Among these, I believe that the attachment of liner bearings (product name: Tarkaite), which are mechanically rigid and can easily restore precision by replacing them when worn, is quite common.
Dealing with it in a unique way based on years of experience!
The remarkable development of electric control devices has made high-speed operations with fast sliding speeds possible. However, since the sliding parts cannot keep up with the friction coefficient of metals, it has become necessary to change to materials with a lower friction coefficient. Depending on the application, LM guides, liner bearing attachments, and coatings such as SKC and Moglice are used, each with its own characteristics. Among these, I believe that the attachment of liner bearings (product name: Tarkaite), which are mechanically rigid and can easily restore precision by replacing them when worn, is quite common.
Dealing with a unique approach based on years of experience!
The remarkable development of electric control devices has made high-speed operations with fast sliding speeds possible; however, the sliding parts cannot keep up with the friction coefficient of metals, necessitating a change to materials with lower friction coefficients. Depending on the application, LM guides, liner bearing attachments, and coatings such as SKC and Moglice are used, each with its own characteristics. Among these, the attachment of liner bearings (product name: Tarkaite), which are mechanically rigid and can easily restore precision by replacing them when worn, is likely the most common.
Responding with a unique approach based on years of experience!
The remarkable development of electric control devices has made high-speed operations with fast sliding speeds possible; however, the sliding parts cannot keep up with the friction coefficient of metals, necessitating a change to materials with lower friction coefficients. Depending on the application, LM guides, liner bearing attachments, and coatings such as SKC and Moglice are used, each with its own characteristics. Among these, I believe that the attachment of liner bearings (product name: Tarkaite), which are mechanically rigid and can easily restore precision by replacing them when worn, is quite common.
This is an introduction to a special specification lift table with a bucket inversion, sliding, and rotating device.
The strength and safety factor are set to be more than four times that of the KTL series. The hydraulic power unit of the KTL series has an internal type ranging from 0.75 kW to 3.7 kW. The model KTL-2547-56-04P has a table size of 2,460 x 4,700 mm, a stroke of 5,560 mm, and a load capacity of 400 kg. For more details, please contact us or refer to the catalog.
The slide and swivel table can be used for welding large-diameter copper pipes.
The strength and safety factor are set to over 4 times for the KTL series. The hydraulic power unit for the KTL series is an internal type ranging from 0.75 kW to 3.7 kW. The model KTL-2530-50-1P can be used for welding large diameter copper pipes. The table dimensions are 2,450 x 3,000 mm, the stroke is 5,000 mm, and the load capacity is 1,000 kg. For more details, please contact us or refer to the catalog.
It is suitable for observing and storing filters with a diameter of 47mm.
【Features】 ● Made of polystyrene, it consists of a main body, lid, and ring, making it suitable for observing and storing filters with a diameter of 47 mm. ● By setting the ring, it prevents the filter from warping, and since the container does not condense even when the filter is wet, it is very convenient for observation under a microscope. ● The lid can be set to allow for the storage of the filter. ● Set the membrane filter so that the observation surface is facing upwards in the main body. ● As shown in Photo 1, by setting the ring on the main body, it prevents warping of the membrane filter, and since it does not condense even when the membrane filter is wet, it makes observation with a microscope easier. ● As shown in Photo 2, by setting the lid instead of the ring, it prevents the membrane filter from drying out and allows for the storage of the observed specimen.
We also introduce features and allowable loads! Precautions for use and installation notes are also included.
This catalog introduces the "Ball Slide" products that we handle. We feature the "High Rigidity Precision Ball Slide" made of stainless steel with excellent corrosion resistance, as well as the "Precision Ball Slide," which is lightweight, compact, and offers stable performance. Additionally, we also present the "Ball Slide," known for its smooth operation, and provide explanations regarding permissible loads, load directions, rated loads, precision, and preload. 【Featured Products (Partial)】 ■ High Rigidity Precision Ball Slide ・ BWU ■ Precision Ball Slide ・ BSP ・ BSPG ・ BSR *For more details, please refer to the PDF document or feel free to contact us.
Improvement in linear guide rigidity reduces table displacement by 48%! Allowable moment and running parallelism are equivalent to conventional levels.
We would like to introduce the 'MXH2 Series' that we handle. By extending the length of the guide section of the linear guide, we improve rigidity. This significantly reduces the table displacement during moment action. Additionally, if you need to change the port position, we offer a custom product number -XC3□. 【Features】 ■ 48% reduction in pitch direction displacement ■ 63% reduction in yaw direction displacement ■ 90% reduction in roll direction displacement ■ Achieves high rigidity ■ Up to 6% reduction in weight ■ Compatible with compact auto switches *For more details, please download the PDF or feel free to contact us.
Stable accuracy and rigidity can be achieved even in applications where variable loads and combined loads are applied!
The "BWU" is a compact and simple structure finite stroke type that incorporates steel balls and retainers between a table and a bed in a monolithic design. All steel components are made of stainless steel, which has excellent corrosion resistance, making it suitable for applications that avoid the use of anti-fog oils, such as in clean rooms. Additionally, we also offer "precision ball slides" and "ball slides." 【Features】 ■ High precision ■ Made of corrosion-resistant stainless steel ■ Simple structure with finite linear guidance ■ Smooth operation *For more details, please download the PDF or feel free to contact us.
![[Data] Linear Type Slide 'L104'](https://image.mono.ipros.com/public/product/image/383392/IPROS11674317020375969138.png?w=280&h=280)
Specifications for materials, surface treatments, lubricants, mounting screws, and more are also included!
This document contains the drawings and specifications for the linear type slide 'L104' handled by Fujikawa Denko Co., Ltd. It includes drawings with information such as outer member length and stroke length, as well as numerous other details including model numbers. Additionally, it provides specifications regarding materials used, surface treatment, lubricants, mounting screws, and more, so please make use of it. 【Model No. (partial)】 ■L104-12 ■L104-14 ■L104-16 ■L104-18 ■L104-20 *For more details, please download the PDF or feel free to contact us.
![[Data] Double Slide 'ND160-C3'](https://image.mono.ipros.com/public/product/image/383392/IPROS4285894428668944863.png?w=280&h=280)
We have included drawings with information such as stroke length and member length, as well as cross-sectional views!
This document contains the drawings and specifications for the double slide 'ND160-C3' handled by Fujikawa Denko Co., Ltd. It includes a wealth of information such as the materials used, surface treatment, lubricants, mounting screws, model numbers, and more. Additionally, there are drawings that provide information on stroke length and member length, as well as cross-sectional views, so please make use of them. 【Model Numbers (partial)】 ■ND160-12C3 ■ND160-14C3 ■ND160-16C3 ■ND160-18C3 ■ND160-20C3 *For more details, please download the PDF or feel free to contact us.
![[Data] Double Slide 'ND150-C2B'](https://image.mono.ipros.com/public/product/image/383392/IPROS4391305966736110694.png?w=280&h=280)
We provide a wealth of information including surface treatment, lubricating oil, mounting screws, model numbers, and more!
This document contains the drawings and specifications for the double slide 'ND150-C2B' handled by Fujikawa Denko Co., Ltd. It includes a wealth of information such as the materials used, surface treatment, lubricants, mounting screws, model numbers, and more. Additionally, it features drawings with information on stroke length and member length, as well as cross-sectional views, so please make use of them. 【Model Numbers (partial)】 ■ND150-12C2B ■ND150-14C2B ■ND150-16C2B ■ND150-18C2B ■ND150-20C2B *For more details, please download the PDF or feel free to contact us.
![[Data] Double Slide 'ND150-C3'](https://image.mono.ipros.com/public/product/image/383392/IPROS8149426219117017163.png?w=280&h=280)
Information such as materials used, surface treatment, lubricants, and mounting screws is also included!
This document contains the drawings and specifications for the double slide 'ND150-C3' handled by Fujikawa Denko Co., Ltd. It includes drawings that detail the stroke length and member length, as well as a summary of specifications for each model number. Additionally, information on materials used, surface treatment, lubricants, and mounting screws is also provided, so please make use of it. 【Model No. (partial)】 ■ND150-12C3 ■ND150-14C3 ■ND150-16C3 ■ND150-18C3 ■ND150-20C3 *For more details, please download the PDF or feel free to contact us.
![[Data] Double Slide "ND150"](https://image.mono.ipros.com/public/product/image/383392/IPROS17685446800502820977.png?w=280&h=280)
We provide a wealth of information including materials used, surface treatment, lubricating oil, mounting screws, model numbers, and more!
This document contains the drawings and specifications for the double slide 'ND150' handled by Fujikawa Denko Co., Ltd. It includes a wealth of information such as the materials used, surface treatment, lubricants, mounting screws, model numbers, and more. Additionally, it features drawings with information on stroke length and member length, as well as cross-sectional views, so please make use of them. 【Model Numbers (partial)】 ■ND150-12 ■ND150-14 ■ND150-16 ■ND150-18 ■ND150-20 *For more details, please download the PDF or feel free to contact us.
![[Data] Double Slide 'D301-C2'](https://image.mono.ipros.com/public/product/image/383392/IPROS433277061283171524.png?w=280&h=280)
We have introduced each specification by model number in a list format!
This document contains the drawings and specifications for the double slide "D301-C2" handled by Fujikawa Denko Co., Ltd. We have provided a list of drawings that include stroke lengths and member lengths, as well as specifications for each model number. Additionally, information on materials used, surface treatment, lubricants, and mounting screws is also included, so please make use of it. 【Model No. (partial)】 ■D301-12 C2 ■D301-14 C2 ■D301-16 C2 ■D301-18 C2 ■D301-20 C2 *For more details, please download the PDF or feel free to contact us.
![[Data] Double Slide 'D270'](https://image.mono.ipros.com/public/product/image/383392/IPROS4491691390674478571.png?w=280&h=280)
We have published a table listing the specifications for each model, including member length and stroke!
This document contains the drawings and specifications for the double slide "D270" handled by Fujikawa Denko Co., Ltd. It includes a wealth of information such as the materials used, surface treatment, lubricants, mounting screws, model numbers, and more. Additionally, drawings with information on stroke length and member length, as well as cross-sectional views, are included, so please make use of them. 【Model Numbers (partial)】 ■D270-200 ■D270-250 ■D270-300 ■D270-350 ■D270-400 *For more details, please download the PDF or feel free to contact us.
There is no circulation resistance from the steel balls, and each component is precisely finished, resulting in light and smooth operation!
The "BWU" is a compact and simple structure finite stroke type high rigidity precision ball slide that incorporates steel balls and retainers between a monolithic table and bed. Due to its two-row four-point contact structure, it achieves stable precision and rigidity even in applications where variable loads and combined loads are applied. Additionally, we offer a wide range of products including the finite wired motion type "BSP," the rack and pinion integrated type "BSPG," and the lightweight linear guide unit "BSU A." 【Features】 ■ Simple structure finite linear guide ■ High precision ■ Smooth operation ■ Made of stainless steel with excellent corrosion resistance *For more details, please download the PDF or feel free to contact us.
