We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for soft.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

soft(cfd) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.

soft Product List

181～195 item / All 210 items

Displayed results
Simerics MP+ is also used for oil cooling analysis of eAxle.

Simerics MP+ is also used for oil cooling analysis of eAxle.

Analyze the oil cooling of the eAxle using Simerics, which has strong rotation and VOF capabilities! It's also suitable for switching from other general-purpose CFD solvers or particle methods.

【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation, water hammer effect ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Flow field (velocity vectors, pressure), flow rate, fluid forces, and time variation of torque Recently, there has been an increase in projects for oil cooling analysis of eAxles for automobiles, and when solving the VOF method with other CFD software, we have received inquiries such as: - Analysis time is too long - It is difficult to create fine calculation meshes - It diverges and does not converge Additionally, even when analyzing with particle methods, we have received feedback that accurate thermal analysis cannot be performed, and it can only determine the areas where oil is present. Our company undertakes actual contract work from Tier 1 customers, gaining know-how that cannot be obtained solely from software sales. Development source's SAE presentation paper on motor oil cooling https://saemobilus.sae.org/content/2020-01-0168/

  • Thermo-fluid analysis
  • Contract Analysis
  • simulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simerics MP+ is also used for the oil cooling analysis of E-Axle.

Simerics MP+ is also used for the oil cooling analysis of E-Axle.

Analyze the oil cooling of the E-Axle using Simerics, which has strong rotation and VOF capabilities! It's also suitable for switching from other general-purpose CFD solvers or particle methods.

【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation, water hammer effect ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque Recently, there has been an increase in projects for oil cooling analysis of E-Axles for automobiles, and when solving the VOF method with other CFD software, we have received inquiries such as: - Analysis time is too long - It is difficult to create fine computational meshes - The solution diverges and does not converge Additionally, even when analyzing with particle methods, we have received feedback that accurate thermal analysis cannot be performed, and it is only possible to determine the areas where oil is present. Our company has gained know-how that cannot be obtained solely from software sales by actually undertaking contract work from Tier 1 customers. Development source's SAE presentation paper on motor oil cooling https://saemobilus.sae.org/content/2020-01-0168/

  • Thermo-fluid analysis
  • Contract Analysis
  • simulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simerics MP+ is also used for oil cooling analysis of e-axles.

Simerics MP+ is also used for oil cooling analysis of e-axles.

Analyze the oil cooling of e-axles with the powerful rotation and VOF features of Simerics! It's also suitable for switching from other general-purpose CFD solvers and particle methods.

【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation, water hammer effect ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque Recently, there has been an increase in projects for oil cooling analysis of e-axles for automobiles, and when solving the VOF method with other CFD software, we have received inquiries such as: - Analysis time is too long - It is difficult to create fine computational meshes - It diverges and does not converge Additionally, even when analyzed using particle methods, we have received feedback that accurate thermal analysis cannot be performed, and it only provides a rough idea of where the oil is located. Our company has gained know-how that cannot be obtained solely from software sales by actually undertaking contracted work from Tier 1 customers. Development source's SAE presentation paper on motor oil cooling https://saemobilus.sae.org/content/2020-01-0168/

  • Thermo-fluid analysis
  • Contract Analysis
  • simulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cooling analysis of the e-axle also uses "Simerics MP+".

Cooling analysis of the e-axle also uses "Simerics MP+".

Analyze the cooling of the e-axle with Simerics, which has strong rotation and VOF capabilities! It's also suitable for switching from other general-purpose CFD solvers or particle methods.

【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations, water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Flow field (velocity vectors, pressure), flow rate, fluid forces, and time variations of torque Recently, there has been an increase in projects for cooling analysis of e-axles for automobiles, and when solving the VOF method with other CFD software, we have received inquiries such as: - Analysis time is too long - It is difficult to create fine computational meshes - The solution diverges and does not converge Additionally, even when analyzing with particle methods, we have received feedback that accurate thermal analysis cannot be performed, and it is only possible to identify areas where oil is present. Our company has gained know-how that cannot be obtained solely from software sales by undertaking actual contract work from Tier 1 customers. SAE presentation paper on motor oil cooling from the developer: https://saemobilus.sae.org/content/2020-01-0168/

  • Thermo-fluid analysis
  • Contract Analysis
  • simulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simerics MP+ is also used for oil cooling analysis of e-axles.

Simerics MP+ is also used for oil cooling analysis of e-axles.

Analyze the oil cooling of the e-axle with Simerics, which has strong rotation and VOF capabilities! It's also suitable for switching from other general-purpose CFD solvers and particle methods.

【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in the liquid ■ Pressure pulsation, water hammer effect ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque Recently, there has been an increase in projects for oil cooling analysis of e-axles for automobiles, and when solving the VOF method with other CFD software, we have received inquiries regarding: - Excessive analysis time - Difficulty in creating fine computational meshes - Divergence and failure to converge Additionally, even when analyzing with particle methods, we have received feedback that accurate thermal analysis cannot be performed, and it is only possible to determine the areas where oil is present. Our company has gained know-how that cannot be obtained solely from software sales by actually undertaking contracted work from Tier 1 customers. SAE presentation paper on motor oil cooling from the developer: https://saemobilus.sae.org/content/2020-01-0168/

  • Thermo-fluid analysis
  • Contract Analysis
  • simulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cooling analysis of the eAxle also uses "Simerics MP+".

Cooling analysis of the eAxle also uses "Simerics MP+".

Analyze the cooling of eAxle with Simerics, which has strong rotation and VOF capabilities! It's also suitable for switching from other general-purpose CFD solvers or particle methods.

【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation, water hammer effect ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque Recently, there has been an increase in projects for cooling analysis of eAxles for automobiles, and when solving the VOF method with other CFD software, we have received inquiries such as: - Analysis time is too long - It is difficult to create fine computational meshes - The solution diverges and does not converge Additionally, even when analyzing with particle methods, we have received feedback that accurate thermal analysis cannot be performed, and it can only determine the areas where oil is present. Our company undertakes actual contracted work from Tier 1 customers, gaining know-how that cannot be obtained solely from software sales. Development source's SAE presentation paper on motor oil cooling https://saemobilus.sae.org/content/2020-01-0168/

  • Thermo-fluid analysis
  • Contract Analysis
  • simulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cooling analysis of the E-Axle also uses "Simerics MP+".

Cooling analysis of the E-Axle also uses "Simerics MP+".

Analyze the cooling of the E-Axle with Simerics, which has strong rotating and VOF capabilities! It's also suitable for switching from other general-purpose CFD solvers or particle methods.

【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation, water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque Recently, there has been an increase in projects for cooling analysis of E-Axles for automobiles, and when solving the VOF method with other CFD software, we have received inquiries such as: - Analysis time is too long - It is difficult to create fine calculation meshes - The analysis diverges and does not converge Additionally, even when analyzed using particle methods, we have received feedback that accurate thermal analysis cannot be performed, and it is only possible to identify areas where oil is present. Our company undertakes actual contracted work from Tier 1 customers, gaining know-how that cannot be obtained solely from software sales. Development source's SAE presentation paper on motor oil cooling: https://saemobilus.sae.org/content/2020-01-0168/

  • Thermo-fluid analysis
  • Contract Analysis
  • simulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Simerics MP+ is also used for cooling analysis of e-axles.

Simerics MP+ is also used for cooling analysis of e-axles.

Analyze the cooling of e-axles with the powerful rotation and VOF features of Simerics! It's also suitable for switching from other general-purpose CFD solvers or particle methods.

【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation, water hammer effect ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Flow field (velocity vectors, pressure), flow rate, fluid forces, and torque over time Recently, there has been an increase in projects for cooling analysis of e-axles for automobiles, and when solving the VOF method with other CFD software, we have received inquiries such as: - Analysis time is too long - It is difficult to create fine computational meshes - The analysis diverges and does not converge Additionally, even when analyzed using particle methods, we have received feedback that accurate thermal analysis cannot be performed, and it is only possible to determine the areas where oil is present. Our company has gained know-how that cannot be obtained solely from software sales by actually undertaking contracted work from Tier 1 customers. SAE presentation paper on motor oil cooling from the developer https://saemobilus.sae.org/content/2020-01-0168/

  • Thermo-fluid analysis
  • Contract Analysis
  • simulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluid analysis software for gear pumps, 'Simerics MP+'.

Fluid analysis software for gear pumps, 'Simerics MP+'.

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, we encourage you to see the actual mesh creation and movement through a demo presentation!!

  • Thermo-fluid analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluid analysis software for electric pumps, 'Simerics MP+'.

Fluid analysis software for electric pumps, 'Simerics MP+'.

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool for calculating the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demonstration!

  • Thermo-fluid analysis
  • Contract Analysis
  • simulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Drying Oven Analysis Software 'BD (BAKING DESIGNER)'

Drying Oven Analysis Software 'BD (BAKING DESIGNER)'

Drying furnace analysis software that achieves high calculation accuracy!

"BD (BAKING DESIGNER)" is an easy-to-use drying oven analysis software that performs mesh generation almost fully automatically. It has a fast calculation speed, completing the entire oven process calculations in 7 hours to 1 day. Additionally, it allows for simultaneous calculations of fluid analysis and heat conduction in solids. 【Features】 ■ User-friendly ■ Fast calculation speed ■ Simultaneous calculations of fluid analysis and heat conduction in solids ■ Strict energy conservation ■ High calculation accuracy *For more details, please download the PDF or feel free to contact us.

  • Software (middle, driver, security, etc.)
  • Thermo-fluid analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Today's ANSYS] Utilized for water flow simulation (LIXIL)

[Today's ANSYS] Utilized for water flow simulation (LIXIL)

We would like to introduce an interview article with Mr. Manabu Umeda and Mr. Shinichi Sagara from LIXIL Corporation!

I would like to introduce information about how CAE and CFD are useful in the world, including interesting application examples, primarily through articles from the information magazine "ADVANTAGE" published by ANSYS, Inc. and ANSYS Japan Co., Ltd. This time, we will present an interview article with Mr. Manabu Umeda and Mr. Shinichi Sagara from LIXIL Corporation, who are utilizing flow analysis of toilet products in the design and development of new products. There are various fluid analysis tools available, but the reason for choosing ANSYS Fluent is that it can simulate products such as toilets and bathtubs, which are composed of curved surfaces. One of the benefits of introducing simulation is "visualization." Since ceramic toilets can only be visually inspected up to the point where water accumulates, it is not possible to see the condition of the drainage path. With simulation, it is possible to confirm the internal flow on the drainage side, allowing for appropriate measures to be taken based on simulation results, rather than relying solely on the intuition and experience of the designers. *For more details, please download the PDF or contact us.*

  • Company：IDAJ
  • Price：Other
  • Development support tools (ICE, emulators, debuggers, etc.)
  • simulator
  • Other analyses

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluid analysis software for gear pumps, 'Simerics MP+'.

Fluid analysis software for gear pumps, 'Simerics MP+'.

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and motion through a demonstration!

  • Thermo-fluid analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
General-purpose thermal fluid analysis software 'Simerics MP+'

General-purpose thermal fluid analysis software 'Simerics MP+'

It offers ease of use and multifunctionality to meet a wide range of needs, from beginners to experts in CFD analysis.

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see the actual mesh creation and movement through a demo presentation!!

  • Thermo-fluid analysis

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fluid analysis software for gear pumps, 'Simerics MP+'.

Fluid analysis software for gear pumps, 'Simerics MP+'.

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be published online. Especially, please see a demonstration for the actual mesh creation and movement!

  • Thermo-fluid analysis
  • Contract Analysis
  • simulator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to soft

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.