Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 12, 2026～Sep 08, 2026
This ranking is based on the number of page views on our site.
211～240 item / All 284 items
Would you like to make a custom case?
We can also suggest cases such as the NANUK case. This case is waterproof, so you can feel secure even in bad weather. The complex shape, like that of a camera, was molded using a scanner. For small quantities, water jet processing without a mold is also possible.
The rubber sponge, also known as foam rubber, is made from EPDM material. EPDM has weather resistance suitable for outdoor applications.
E-4388 is a medium-hard EPDM rubber foam with a hardness of 20°±5°. It excels in weather resistance, chemical resistance, ozone resistance, and electrical insulation. The back side is directly coated with adhesive. The advantage is that it is more cost-effective than double-sided tape and easier to follow expansion and contraction.
It resembles urethane, but it is resistant to ultraviolet rays and does not discolor. LC-150 has a foaming ratio of 15 times and is soft, and there is also a higher version, LC-300.
It has a texture similar to urethane due to the continuous bubble polyethylene sponge, but it is physically different. It absorbs sound and water, insulates heat, and has excellent sealing properties. We can slice it from a thickness of 85mm to match your desired thickness.
The NK909B is a relatively small trunk case. It often uses storage foam made by Inoac, such as A-8, B-4, and ECS.
We will create foam to fit the internal dimensions of the NANUK case. We have chosen the sturdy Sanpelca L-1400. In addition to black, yellow cases can also be sourced.
Color foam is used for car wash sponges because it allows water to pass through. It is said to have many uneven holes and produces good lather.
EGT-C is a lightweight, soft-touch polyurethane foam product that is widely used as a car wash sponge, with minimal deformation. It is yellow in color, has an apparent density of 22±2 kg/m³, and can be processed to the required dimensions in thickness, width, and length. You may have seen cheese full of holes eaten by mice in anime, and that is exactly the image it evokes, characterized by large bubbles.
The application sponge was heat laminated to withstand the liquid agent. It will not be separated unless the material breaks, as it melts the surface and integrates it.
ECS is a representative material of urethane, and A-8 is a representative material of PE foam. It achieves welding through heat and provides high solvent resistance in adhesion. There are other adhesive methods and materials available, so please feel free to consult with us.
NBR rubber sponge is made from a rubber that has excellent oil resistance. NBR sponge, such as NBR-4112E, is one of the few options available.
NBR-4112E is a foam material primarily composed of NBR rubber, which has excellent oil resistance. It is used for cushioning and sealing materials, and due to its closed-cell structure, it does not allow liquids to pass through. It has almost no water absorption or breathability, and can achieve sealing with low compression rates. It is lightweight, resistant to tearing, and has a low thermal conductivity, making it suitable for insulation materials. The hardness is 15±5°, the color is black, the apparent density is 150±3 kg/m³, and the effective dimensions are 30mm × 1,000mm × 1,000mm.
The A-12 is a very hard sponge compared to others. The A-12 from the P.E. Light series can also be processed using water jet cutting.
A-12 is a firmer foam with a bulk density of 120 kg/m³, made from polyethylene that is seven times expanded. It is available in three colors: white, black, and gray. Its shape is resistant to deformation, making it suitable for use with jigs.
LD-15 is a low VOC sponge made without the use of chemical blowing agents. LD-15 is the lightest grade in the series.
LD-15 is made with a high foaming ratio of about 70 times and is considered equivalent to a standard product with a ratio of 30 times. Water jet processing and die-cutting can also be applied in the same way as standard products. This material is expected to perform well in medical fields that dislike outgassing and in export-related applications.
Silicone sponges are available in standard materials such as round and kamaboko shapes. We also accept processing such as cutting and bonding for standard square cords.
It has excellent weather resistance and heat resistance (approximately -50°C to 200°C). Due to its heat resistance, it becomes a reddish color by incorporating iron oxide. It is a standard rectangular product and can be cut to your preferred length since it is a long item. Double-sided tape can also be applied. It is available for sale cut to your specified length.
Color foam is available in a wide range from high density to low density, including functional materials. ECZ is a representative of low-density sponge and is also priced affordably.
ECZ is a lightweight, soft-touch polyurethane foam that has minimal sagging and is widely used as cushioning material. Due to its continuous bubbles, it allows water to pass through. Being a polyether-based foam, it is chemically stable against water and has excellent chemical resistance. It is available in white and gray, with an apparent density of 16±1.5kg/m³, and can be processed to the required dimensions in thickness, width, and length.
Storage sponges can be custom-made to fit specific shapes. By using a firmer sponge with custom dimensions, you can protect against vibrations and impacts.
Polyethylene foam is a relatively firm material with little deformation. It is ideal for securing contents and cushioning against vibrations and impacts. Depending on the shape, it can be processed by punching up to about 50mm in thickness.
Even small holes can be punched!
The Si-300 is an independently foamed cell silicone sponge with a heat resistance temperature of 200°C. This product features extremely small holes with a diameter of 4mm, which are processed through punching. It complies with the Food Sanitation Act (Ministry of Health and Welfare Notification No. 370) and can be used for food and medical-related applications, making it suitable for a variety of products across different industries.
A-8 22mm thick cushioning sponge for tool storage - from design to delivery, leave the selection of sponge material to us.
This is a case where we consistently handled the design, production, and delivery of custom cushioning foam for tool storage using A-8 (polyethylene foam) with a thickness of 22mm from the planning stage. A-8 is lightweight and has a moderate hardness, making it a highly regarded material for storage inners that securely hold tools and precision parts while allowing for easy retrieval. ■ Processing Details Material Used: A-8 (black) 22mm thick Processing Method: Cutting plotter Scope of Work: - Storage layout design - Recess design tailored to tool shapes - Cutting processing - Adjustments for incorporation into cases - Consistent support until final delivery We performed recess processing based on the shape of the tools, resulting in a finish that balances "prevention of rattling" and "good visibility."
Production of logos for the exhibition, all made of sponge material. (Fujika Industries)
We create logos for exhibitions and events entirely using sponge material. The lightweight and easy-to-handle sponge material makes setup and takedown simple, which is a key feature for exhibition use. We can achieve various shape expressions tailored to the design, including contour cuts and letter cutouts. We can also accommodate three-dimensional structures with added thickness and adjust the size to fit the exhibition space.
![[Fujika Industries] Cylindrical Sponge Length 100mm (ECS) Mold Design](https://image.mono.ipros.com/public/product/image/2090057/IPROS14154840026718597250.jpg?w=280&h=280)
[Fujika Industry] Cylindrical Sponge Length 100mm (ECS) Mold Design
We are capable of producing cylindrical shaped products using ECS sponge. The specification for this time is a cylindrical sponge with a length of 100mm. Cylindrical shapes are easily affected by the balance of outer diameter, inner diameter, and length, as well as the stability during cutting, making the adjustment of processing conditions important. In this case, we took measures in the mold design to ensure shape retention and processing stability. However, it still does not turn out perfectly straight and tends to have some waviness.
Easy cleaning, excellent cleaning! Reduced maintenance (cleaning time).
Three types to match the size of the nozzle shaft: 1. Designed to fit the outer diameter of the shaft compared to conventional cleaning tools. It effectively removes dirt adhering to the shaft. 2. Easy to clean, resulting in reduced cleaning time. 3. The main body of the tool is designed to be long, making it easy to reach the shaft. Anyone can easily perform the cleaning. *For more details, please refer to the PDF materials (catalog) or feel free to contact us.*
Introducing exterior coated sponge for materials of railway vehicles that require flame resistance, such as buildings and ships!
"Super High Spot" is a sponge with an excellent flame-retardant outer coating. The outer surface of the sponge is covered with solid rubber made of CR material with a thickness of 0.8mm. As a result, compared to the sponge alone, it offers superior product performance that withstands repeated compression and external damage. Additionally, the material of the product, both solid rubber and sponge rubber, is flame-retardant CR that meets the combustion test standards for materials used in railway vehicles. It can be used not only in buildings and ships but also as components in railway vehicles where flame retardancy is required. 【Features】 ■ Flame-retardant rubber, composite extruded product ■ Outer surface covered with 0.8mm thick solid rubber ■ Exhibits strong performance against repeated compression and external damage compared to the sponge alone ■ Flame-retardant CR that meets the combustion test standards for materials used in railway vehicles *For more details, please visit our website through the PDF materials or related links, or feel free to contact us.
Exhibits great reliability even under harsh usage conditions! Long sponge molded through continuous vulcanization.
"High Spot" is a high-quality rubber sponge used in a wide range of applications as parts for various industrial equipment. It demonstrates great reliability even under harsh usage conditions. It is a long sponge molded through continuous vulcanization, with a surface that has a thin rubber film. Additionally, we also manufacture sponges in special shapes according to specific applications, in addition to square and round cords. 【Features】 ■ Demonstrates great reliability even under harsh usage conditions ■ Long sponge molded through continuous vulcanization ■ Surface has a thin rubber film ■ Special-shaped sponges can also be manufactured according to application *For more details, please refer to the PDF document or feel free to contact us.
Designed with a focus on a soft texture even when dry! It leads to a smooth, shiny, and beautiful skin.
The "HIYOKO MB-1" is a newly shaped sponge designed to match the three-dimensional structure of the face. By wetting it with water, it expands to 1.5 times its size, becoming fluffy and soft, providing a thin application with a sense of adherence, leading to a glossy, smooth, and beautiful skin. It can accommodate all types of foundations: powder, liquid, cream, and cushion, all with this one product. 【Features】 ■ Easily finish hard-to-reach areas with the tip ■ Evenly apply to curved areas of the face, such as the cheeks ■ Tapping enhances the adherence of the foundation, resulting in a finish that is less prone to makeup breakdown ■ Designed with a focus on a soft skin feel even when dry *For more details, please refer to the PDF document or feel free to contact us.
Eliminate the cause of allergies! With the deproteinization treatment of natural sponges, added softness!
The "ST-320" is a sustainable natural sponge made from fair trade natural rubber. Thanks to our unique technology, we have successfully removed the proteins that cause latex allergies. The residue of chemicals used during the rubber processing has been reduced through a special cleaning treatment. Additionally, by using paper packaging, we have reduced plastic materials by 40%, contributing to SDGs activities. 【Features】 ■ Made from fair trade natural rubber ■ Considerate of both skin and the environment ■ CO2 reduction with paper packaging ■ Removal of allergy-causing agents ■ Soft and fluffy texture *For more details, please refer to the PDF materials or feel free to contact us.
Just a simple task of wetting and rubbing! Can also be used on coated vehicles.
"GY-01" is an iron powder removal sponge that can also be used on coated vehicles. It completely removes pollen, yellow sand, iron powder, bird droppings, insect remains, and tree sap without damaging the paint. Even if it falls, it can be reused by washing it with water. Please feel free to contact us when you need it. 【Features】 ■ Easy to use ■ Compatible with all paint colors ■ Extremely durable for up to 50 vehicles *For more details, please refer to the PDF document or feel free to contact us.
Just wet it and rub—it's an easy installation!
◎Easy to use! Just wet and scrub! ◎Without damaging the paint, it completely removes stubborn dirt such as pollen, yellow sand, iron powder, bird droppings, insect remains, and tree sap that stick to the body, leaving it smooth! ◎When used in conjunction with the AF-19 Anywhere Wash Team Speedster, the body becomes surprisingly shiny! ◎Can also be used on coated vehicles. ◎If it falls, you can wash it with water and use it again. ◎Super durable for 50 uses. *For more details, please refer to the PDF document or feel free to contact us.
2面タイプ、簡単スポンジタイプのツヤ革靴専用ツヤ出しです。
当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「コロンブス ダブルシャイン」を取り扱っております。 スポンジに含まれたツヤ出し剤により、拭くだけで光沢が得られます。 防カビ剤がカビの発生を防ぎます。 無色タイプなのでどんな色のツヤ革靴にも使用できます。
サラックスの中で最も強い刺激のある商品。
当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「スーパーハード ハードレベル強 ネイビー KS-580」を取り扱っております。 サラックスの中で最も強い刺激のある商品。
革製品のお手入れに最適な塗布用スポンジです。
当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「クリーム塗布用スポンジ」を取り扱っております。 ２個入りなので、用途別に使い分けが可能です。 革靴・バッグ・革小物など様々な皮革製品に使用できます。
銀と銅によるW抗菌処理を施すことによって清潔、かつ安全に使うことができるキッチンスポンジです。
当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「Ｗ抗菌水切れスポンジ ブラック×ホワイト KWA06」を取り扱っております。 水切れがよく清潔で、特殊加工で汚れが落ちる水切れタイプ。 -------------- 【関連ワード】 キッチングッズ キッチンスポンジ --------------
手のひらにフィットしやすいミニサイズです！
当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「あちこち使えるミニスポンジ 1010039」を取り扱っております。 食器汚れ、お鍋、コンロ、シンク、排水管とあちこち使えます！ 素材はやわらかくクッション性に優れたウレタンフォームです。 水切れがしやすく、清潔に保ててます！ 24個入りの大容量、使い切りで衛生的です。 内容量/24個入 耐熱温度/約100℃
【磨くことでフッ素の膜を作り汚れがつきにくくなる】
当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「貼りつくシンク洗い KFG01」を取り扱っております。 立体メッシュ面はフッ素が含浸されているので、磨くたびにフッ素の膜を作り、汚れがつきにくくなります。 排水口まわりや細かい段差を洗える波型の形状になっています。 【使わない時は貼りつけて保管できる】 使わない時はシンクなどの凹凸のないツルツルしたところに貼りつけて保管でき、衛生的に使うことができます。 -------------- 【関連ワード】 掃除用品 フッ素ガード --------------
銀と銅によるW抗菌処理を施すことによって清潔、かつ安全に使うことができるキッチンスポンジです。
当社で運営する会員限定の卸売(仕入れ)サイト「Kenko卸.com」では、 「Ｗ抗菌アクリルスポンジ グレー KWA02」を取り扱っております。 茶しぶやコーヒー汚れを水だけで落とせるアクリルタイプ。 -------------- 【関連ワード】 キッチングッズ キッチンスポンジ --------------
