stainless Product List and Ranking from 66 Manufacturers, Suppliers and Companies

High-performance stainless steel "Silicoroy XVI MAST Hardon Plate"

Technical data presentation! Includes various characteristics of Silicoroy XVI hardon plates and the wear characteristics of each material of the hardon plates.

As a high corrosion-resistant specification for MAST hard-on plates, Silico Alloy XVI is adopted. The TF Silico Alloy XVI hard-on plate (ultra-precision plate that has been heat-treated and ground) is effective for parts that require corrosion resistance and wear resistance. It has a hardness level equivalent to martensitic stainless steel hard-on plates (approximately HRC 56-58) and exhibits good corrosion resistance comparable to SUS304. Additionally, detailed wear test data (ball-on-disk) and corrosion test data (cyclic wet test) for each material of the hard-on plates (carbide, powder high-speed steel, SKH51, SKD11, SKD61, SUS420J2, and others) are also available, making it useful as reference material for research and development.

Company：シリコロイラボ
Price：Other

Special Steel
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance stainless steel "Silico Alloy Catalog" *Digest Edition (24 pages)

Introduction to the comprehensive catalog and digest version of the special stainless steel "Silicoroy"!

A comprehensive catalog that explains the all-around stainless steel "Silico Alloy," which combines multiple characteristics in one steel. We offer several catalogs, including a digest version, a technical catalog, and one for professionals.

Company：シリコロイラボ
Price：Other

stainless
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is Silicoroi? 【Silicoroi Technology Handbook】

The balance of high Si and low C is characteristic! The composition of Ni, Cr, and precipitation strengthening elements is adjusted according to the application!

Silicon (Si), which was considered an impurity, has been actively utilized as a substitute for carbon (C), and by further precipitating finer intermetallic compounds, a new material has been born. This document includes sections such as "What is Silicoroy?", "Advantages of Silicoroy", "Types of Silicoroy", and "An Example of the Chemical Composition of Silicoroy". We encourage you to read it. [Contents (partial)] ■ What is Silicoroy? ■ Advantages of Silicoroy ■ Types of Silicoroy ■ What is Precipitation-Hardened Stainless Steel? ■ Balance of Hardness and Corrosion Resistance *For more details, please refer to the PDF document or feel free to contact us.

Company：シリコロイラボ
Price：Other

stainless
Other metal materials
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Characteristics of Silicoroy XVI [Silicoroy Technology Handbook]

Contains a large amount of Si (silicon) as one of its chemical components! It has all-around versatility!

"Silicoroy XVI" is an improved steel type of Silicoroy A2 that possesses a well-balanced combination of high strength, high hardness, corrosion resistance, heat resistance, wear resistance, and anti-seizing properties, achieving a maximum hardness of HRC54 or higher (around 55 to 58) as a precipitation-hardened stainless steel. This document includes examples such as "an example of chemical composition," "an example of two-stage aging treatment," and "methods for improving toughness (Bend Test: simple bending test)." Please take a moment to read it. [Contents (partial)] ■ Example of chemical composition ■ Example of physical properties ■ Example of mechanical properties ■ Example of Silicoroy XVI specifications *For more details, please refer to the PDF document or feel free to contact us.

Company：シリコロイラボ
Price：Other

stainless
Other metal materials
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Precipitation hardening stainless steel "Axia" *has minimal thermal treatment deformation and dimensional changes.

A new material with a high hardness of 56-58 HRC, high corrosion resistance equivalent to austenitic phase, and high strength of 2000 MPa class has been developed: precipitation-hardened stainless steel!

By precipitating hard metal intermetallic compounds through aging treatment, high hardness and wear resistance are improved; however, there was a challenge where the tensile strength and yield strength of our conventional steel (Silico Alloy XVI) decreased. At Silico Alloy Lab, we succeeded in fine and dispersed design of intermetallic compounds through component design! We have developed a new stainless material that adds [high strength × high yield] to [hardness × corrosion resistance]. 【Features of Axia Zero3】 ■ High hardness of 56–58 HRC ■ High corrosion resistance equivalent to austenitic phase ■ Achieves high strength of 2000 MPa class ■ High hardness can be achieved at tempering temperature equivalent (aging treatment at 480°C) ■ Minimal thermal deformation and dimensional changes It is possible to reduce total costs through new product development, problem-solving, and extending lifespan. *For details, please download the PDF or contact us directly.

Company：シリコロイラボ
Price：Other

stainless
Processing Contract
Special Steel
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Chemical solution safety transfer pump Stainless Steel (SUS) series

It is designed for the transfer of diesel fuel and chemically equivalent flammable fluids. *ATEX certified.

The standard stainless steel pump tube is designed for the transfer of diesel fuel and similarly flammable chemical fluids, featuring excellent strength and reliability with robust 316 stainless steel. 【Applicable Fluids】 ■ Alcohol ■ Various solvents ■ Isopropyl ether ■ Aqueous ammonia ■ Gasoline ■ Petroleum-based fluids, etc. *The above are representative examples. Other fluids can also be measured. We can provide a demonstration. Please feel free to consult us.

Company：サニー・トレーディング
Price：Other

Other pumps
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Other stainless steel

If you have any questions about stainless steel strips for springs, please feel free to consult us.

Stainless steel for springs has excellent corrosion resistance and can be used in quite harsh environments. It can withstand temperatures of up to around 300°C. Compared to copper alloy springs, it has a lighter specific gravity and a higher elastic modulus, making it lightweight. However, it has some drawbacks, such as being difficult to weld and braze, and being hard to process due to its high tensile strength. For more details, please contact us.

Company：UACJグループ　泉メタル株式会社　
Price：Other

stainless
stainless

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Design stainless steel sheet Runner stainless steel

Low-friction special textured stainless steel, ideal for various industrial equipment.

This is a functional stainless steel that has been treated with a special uneven surface finish, making it ideal for various industrial equipment, while also enhancing its slip resistance. - Low friction resistance, providing smooth sliding. - Maintains the inherent high corrosion resistance of stainless steel and improves scratch resistance. - Reduces the likelihood of paper or film sticking due to static electricity. - Makes it easier to pick up paper or film from the surface. - Improved deflection strength due to embossing. - Enables weight reduction and cost savings through thin sheet production. - Available for sale from a single piece. *For more details, please download and view the catalog.

Company：高砂鐵工本社工場
Price：Other

Steel
others
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

11 Points on Stainless Steel: Key Considerations for Material Selection

11 Points on Stainless Steel ≪Key Points for Material Selection≫

11 Points on Stainless Steel ◆ Points for Material Selection ◆ ≪Choosing Stainless Steel Materials Based on Application≫ - Each type has different properties such as durability, elasticity, fire resistance, and ease of processing, so the choice varies depending on the application. ≪The Thickness of the Material is as Important as Its Characteristics≫ - Depending on the intended use of the processed stainless steel sheet metal products, it is necessary to choose a processing contractor. - There are differences in the thicknesses that processing contractors specialize in and can handle. ≪It is Important to Confirm the Available Thicknesses and Choose the Right Processing Contractor≫ - It is crucial to select a processing contractor who can propose the optimal material selection according to your company's needs. ≪For Kitchen Equipment, Medical Devices, and Automotive Parts…≫ - Excellent corrosion resistance, high weldability, and capable of complex processing 【SUS304】【SUS316】 ≪For Building Materials, Structural Materials, and Chemical Plants…≫ - Resistant to corrosion, high strength, and formability 【SUS430】

Company：都留川崎工場
Price：Other

Processing Contract
Surface treatment contract service
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

11 Points on Stainless Steel: Points for Laser Processing

11 Points on Stainless Steel: Key Points for Laser Processing

11 Points on Stainless Steel ◆ Points for Laser Processing ◆ ≪Do you have any concerns regarding laser processing?≫ "Scratches from spatter during piercing" "Backside scratches from rebound" ≪Solve it with precise design of assist gas!≫ To prevent scratches caused by spatter scattering, adhesion, and rebound during laser piercing, cutting, and other processing, the assist gas that is injected simultaneously with the laser can be finely adjusted according to the material, size, and other characteristics of the item being processed. *Adjusting the assist gas is very difficult, so it is important to choose an experienced processing contractor who has a wealth of experience with various customers.

Company：都留川崎工場
Price：Other

Processing Contract
Surface treatment contract service
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

11 Points in Stainless Steel: [Point 1 of Bending Processing]

11 Points on Stainless Steel: [Point 1 of Bending Processing]

11 Points on Stainless Steel ◆ Point 1 of Bending Processing: Preventing Bending Marks and Ensuring Angle Accuracy ◆ ≪Do you have these concerns during bending processing?≫ "I experience bending marks during the bending process." "The product surface gets scratched by molds like Yagen." "I want to achieve high-precision bending for medical devices and heating equipment." ≪Solution 1≫ - Utilize protective sheets (thin protective sheets of about 3/100 to avoid affecting precision) ≪Solution 2≫ - When determining angles, simulate the elongation, distortion, and stress according to the material, plate thickness, and bending shape to enhance processing accuracy. *This process of achieving precision is very difficult, so it is important to select an experienced processing contractor. *Recent bending machines support bending from the first piece without trial bends due to the incorporation of angle sensors, and we have also adopted this. This reduces material loss and contributes to shorter lead times.

Company：都留川崎工場
Price：Other

Processing Contract
Surface treatment contract service
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

11 Points in Stainless Steel: Bending Process Points 2

11 Points on Stainless Steel ◆ Point 2 of Bending Processing: Arc Bending ◆ ≪Is the purpose of arc bending clear?≫ For example... - Prototyping → Speed is prioritized - Machine parts → Complex processing - Architectural components → Want to mass-produce In this way, clarifying the points to prioritize according to the application is key to arc bending. ≪It is important to understand the advantages and disadvantages of bending methods suitable for the prioritized points before requesting processing from a manufacturer.≫ - Three-Roller Advantages: Can bend quickly, finishes beautifully without unevenness Disadvantages: Size limitations, results may vary based on the craftsman's experience - Bender Advantages: Capable of complex and difficult processing Disadvantages: Prone to bending marks, relatively time-consuming processing - Mold Advantages: Suitable for mass production, can reduce costs if a mold is available, finishes beautifully without unevenness Disadvantages: If there is no mold, the cost-effectiveness of procurement varies depending on the lot size.

Company：都留川崎工場
Price：Other

Processing Contract
Surface treatment contract service
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

11 Points in Stainless Steel: Key Points for Bending Processing 3

11 Points on Stainless Steel: Key Points for Bending Processing 3

11 Points in Stainless Steel ◆Points for Bending Processing 3: Step Bending◆ ≪Are you facing these problems with step bending?≫ “Despite the precision required for step bending, bending occurs in the window (hole) area.” “Step bending causes a decrease in precision, such as the expansion of the window hole area and the height of the window side.” “When there are many steps in step bending, the yield rate decreases.” ≪Solve it by changing the processing steps!≫ - For the material in the window hole area, leave the corners before the step bending stage and create an opening, then perform the step bending before completely cutting out the window. After the bending process, completely cut out the window. This way, you can maintain the precision of the height of the window side, etc.

Company：都留川崎工場
Price：Other

Processing Contract
Surface treatment contract service
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

11 Points on Stainless Steel: Key Welding Considerations Based on Application

11 Points on Stainless Steel: Key Welding Points According to Application

11 Points on Stainless Steel ◆ Points for Welding According to Application ◆ ≪Do you understand the points for welding according to application?≫ For example... - Medical, kitchen equipment, semiconductor manufacturing equipment → Scratches are a no-go, fine processing is required - Factory, mass production → Fine processing that takes time by hand is not needed - Construction, building components → Durability is required ≪Let's understand the types of welding and their characteristics≫ - TIG Welding Advantages: No sparks, no spatter, fine welding is possible Disadvantages: Can be addressed in post-processing, but tends to cause burn marks - CO2 Welding Advantages: Fast processing is possible Disadvantages: Not suitable for fine parts - Arc Welding Advantages: Ensures the strength of the welded parts Disadvantages: Depends on the skill of the operator - Fiber Laser Welding Advantages: Fast processing is possible. Deep penetration ensures strength with low distortion Disadvantages: The laser beam is thin, so it won't attach if there are gaps in the sheet metal.

Company：都留川崎工場
Price：Other

Processing Contract
Surface treatment contract service
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

11 Points in Stainless Steel: Points for Deburring

11 Points on Stainless Steel: Points for Deburring

11 Points on Stainless Steel ◆Deburring◆ ≪Issues with Burr Residue≫ - Burr residue decreases product safety (can cause injuries by snagging) - In the case of kitchen equipment, burrs can accumulate dirt, compromising hygiene - During the bending process, hitting the back gauge can lead to incorrect bending dimensions As such, burr residue causes various issues not only affecting product precision but also safety and hygiene. ◆Points for Deburring◆ - Be careful not to leave any burrs during processing - Choose the grit of the sander according to the degree of processing and the intended use of the product ◆Utilization of Deburring Machines◆ - The latest machines can perform R-edge finishing - Edge finishing can be done quickly - Processing quality improves, resulting in uniformly R-edged products - Workers are freed from the 3K (dirty, dangerous, and difficult) jobs - Increased productivity—over ten times more efficient than manual work - Improved anti-rust effect for painting—R-edged products allow paint to adhere well - Improved anti-rust effect for plating—uniform edge finishing often results in beautiful plating *Our company uses the AuDeBu series of deburring machines from Authentec.*

Company：都留川崎工場
Price：Other

Processing Contract
Surface treatment contract service
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

11 Points on Stainless Steel: Points for Transportation, Packaging, and Shipping

11 Points on Stainless Steel ◆ Points for Transportation, Packaging, and Shipping ◆ ≪ To avoid scratches and dents during transportation and packaging, as well as time loss during shipping... ≫ - It is important to select processing companies that can provide packaging and transportation suited to the intended use and can explain the packaging during post-shipment discussions. - Choose processing companies that ship using their own delivery trucks.

Company：都留川崎工場
Price：Other

Processing Contract
Surface treatment contract service
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless Steel "SUS303" Φ49×125

Material: Stainless steel, Lot: 1 to 100 pieces, Accuracy: 1/100 to 1/1000 mm

Stainless steel "SUS303" achieves a strict level of precision machining not only through equipment but also through extensive processing experience and skilled workers. TKY Products Co., Ltd. specializes in the manufacturing of high-precision, high-value-added parts at the micron level. You can also trust us with high flatness and high parallelism. 【Specifications】 ○ Material: Stainless steel ○ Lot: 1 to 100 pieces ○ Precision: 1/100 to 1/1000 mm Please contact us for more details.

Company：ティケイワイプロダクツ
Price：Other

Processing Contract
stainless
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless Steel "SUS303" 50×60×30

Material: Stainless steel, Lot: 1 to 100 pieces, Size: 50×60×30

Stainless steel "SUS303" achieves strict levels of precision machining not only through equipment but also through abundant processing experience and the skills of our craftsmen. TKY Products Co., Ltd. specializes in the manufacturing of high-precision, high-value-added parts at the micron level. You can also trust us with high flatness and high parallelism. 【Specifications】 ○ Material: Stainless steel ○ Lot: 1 to 100 pieces ○ Precision: 1/100 to 1/1000 mm Please contact us for more details.

Company：ティケイワイプロダクツ
Price：Other

Processing Contract
stainless
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sintered metal filter stainless steel

Mass production with minimal density variation is possible! We can accommodate three molding methods for your desired element shape.

"High-Precision Sintered Metal Filters" are produced by sintering powdered materials such as stainless steel and bronze, and can accommodate various needs in terms of size and shape through different molding methods. With stainless steel, mass production is possible with high dimensional accuracy and minimal density variation. We can manufacture small-diameter long products and large-diameter seamless (weld-free) items. We can respond to the desired element shape using three molding methods (pressing, CIP, and extrusion). 【Features】 ■ Mass production is possible with high dimensional accuracy and minimal density variation ■ The porosity (density) can be adjusted (allowing for flow rate adjustments) ■ Manufacturing of small-diameter long products and large-diameter seamless (weld-free) items is possible ■ Response available through three molding methods (pressing, CIP, extrusion) *For more details, please refer to the PDF document or feel free to contact us.

Company：マイクロフィルター
Price：Other

Other filters
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Suzushige Stainless Steel

We can express shapes through various sizes of finishes, NC cutting processing, complex bending processing, welding processing, and from mass production to single-item production.

From various sizes of finishes to NC cutting processing, complex bending processing, and welding processing that can accommodate a wide range from thin plates requiring precision to thick plates, our current technological capabilities can express almost everything we envision in tangible form, whether for mass production or single-item production.

Company：株式会社鈴重
Price：Other

Other machine elements
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless steel "cylindrical molding"

Due to molding with urethane rolls, scratches do not occur on the product surface.

We can mold various shapes, including cylindrical taper molding, oval molding, cylindrical molding of products with windows cut out inside, and cylindrical molding of products that include bending. Please make use of our services.

Company：矢部工業
Price：Other

tank
Stainless steel container
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Products handled: Stainless steel

We handle SUS301, SUS303, SUS304, and others.

Hashinaga Metal Co., Ltd. Product Handling Stainless steel includes SUS301, SUS303, SUS304, SUS430, SUS410, SUS420J2, SUS440C, and SUS631. Hashinaga Metal Co., Ltd. has contributed to improving the environmental performance of our main clients, which include automobile and electronic component manufacturers, through products that leverage the characteristics of non-ferrous metal materials and processed parts. Moving forward, we will continue to listen to the voices (needs) of everyone in our customers' development, manufacturing, quality, and purchasing departments, and provide unique products and services that combine the technological capabilities of competitive material manufacturers and processing manufacturers with one-of-a-kind technology. We believe that our ability to accumulate over 70 years of history in the non-ferrous metal material industry is solely due to the trust we have built with our valued customers, suppliers, partner companies, and employees. We will continue to respond to the trust, safety, and expectations of all stakeholders with a spirit of co-creation and mutual prosperity. For more details, please contact us or refer to our catalog.

Company：橋永金属
Price：Other

stainless
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Precision alignment pallet / ultra-precision machining / stainless steel / SUS430

Shortest half-day estimate / We processed product pallets for a certain major semiconductor manufacturer.

Since SUS430 stainless steel was specified, it was prone to burrs, but we minimized them through careful selection of processing methods and tools, and achieved a burr-free finish in accordance with the specifications through finishing treatments. Our company can also handle precision machining of stainless materials (SUS303, SUS304) and aluminum materials (A5052, A2017) in a comprehensive manner. *For more details, please feel free to contact us. Our official website contains even more detailed information. From metals to plastics, you can rely on us for cutting processing of prototype and development parts.

Other machine elements
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Base plate / NC milling / stainless steel / SUS304

Shortest half-day estimate / Processing of base plate for simple production equipment made of SUS304 stainless steel

We processed a base plate for a simple production device using SUS304 stainless steel, approximately 1000×1000 in size. It is slightly larger than the sizes we usually handle, but it is a job that has been receiving an increasing number of inquiries and orders. We have finished the flatness with strict precision. Our company can also accept processing of medium to large-sized, slightly heavier products like this. We can handle requests for medium to large-sized, slightly heavier processed products made from materials such as aluminum (A5052, A2017) and stainless steel (SUS303, SUS304) in a consolidated manner. Our official website contains more detailed information. From metals to plastics, you can rely on us for cutting processing of prototype and development parts.

Automatic sorting machine
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mesh basket / assembly + welding processing / stainless steel / SUS304

Shortest half-day estimate / This is a mesh basket for cleaning production equipment parts requested by a certain major semiconductor manufacturer.

We have finely welded a mesh net made of stainless steel (SUS304) and assembled it with a reinforcement frame. Our company also accepts orders for processed products of such welded structures. *For more details, please contact us. We handle everything from procurement of small quantities of various parts to surface treatment and inspection, including single-item processing. Our official website has more detailed information available. (Link below) We can handle machining of prototype and development parts, from metal to resin!

Other cleaning machines
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pallet for transporting precision electronic components / made of stainless steel (SUS430).

Shortest half-day estimate / For electronic component transport / High-precision machined parts made of stainless steel (SUS430)

<Material> Stainless Steel / SUS430 <Processing> Machining / Milling <Size> W75mm D35mm H5mm This is a pallet component for transporting electronic parts made from stainless steel SUS430. For semiconductors and electronic components, burrs and edges are strictly prohibited, but it is processed cleanly using SUS430. We can accommodate a wide range of materials, including SUS440 and SUS304, from single-item processing to provide solutions tailored to your needs and issues. Additionally, Tuftride treatment and Kanizen (electroless nickel plating) are also possible. We comply with the RoHS directive (Restriction of Hazardous Substances). From metals to plastics, we handle cutting processing for prototype and development parts. Detailed information is available on our official website.

Other machine elements
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is "electropolishing" of stainless steel that improves corrosion resistance?

Simultaneously smooth out tiny bumps and remove relatively large bumps to achieve a glossy finish!

Electrolytic polishing is a method of polishing the surface of products (such as metals like stainless steel) by dissolving it electrochemically in an electrolyte solution (primarily acidic solution). It simultaneously smooths out small irregularities of about 0.01 to 0.1 μm and removes relatively larger irregularities of several micrometers, resulting in a glossy finish. It can be consistently implemented alongside buff polishing, and on-site construction is possible within the country. Additionally, our company will be exhibiting at "SEMICON JAPAN 2024" held at Tokyo Big Sight. We sincerely look forward to your visit. 【Features (especially for stainless steel)】 ■ Improved cleanability ■ Difficulty of fine powder adhesion ■ Strong rust prevention effect ■ Removal of the altered layer from processing *For more details, please refer to the PDF document or feel free to contact us.

Company：三和産業
Price：Other

Wafer processing/polishing equipment
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Duplex stainless steel 'UNS S31803/S32205'

Since it is our own stock, we can accommodate short delivery times and small lots! Excellent impact resistance with duplex stainless steel.

"UNS S31803/S32205" is a duplex stainless steel that is resistant to chlorides and sulfides, making it less prone to stress corrosion cracking. It has high mechanical strength, allowing for the design of smaller diameters for shafts and thinner plates, providing the advantage of weight reduction. Additionally, we also offer the super duplex stainless steel "UNS S32750," which has a pitting resistance equivalent number (PRE) value of 40 or higher. [Features] - Better thermal conductivity and less thermal expansion compared to austenitic stainless steels - Excellent impact resistance - Strong resistance to chlorides and sulfides, making it less likely to experience stress corrosion cracking - In-house stock allows for short lead times and small lot sizes *For more details, please refer to the catalog or feel free to contact us.

Company：清水金属
Price：Other

stainless
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless Steel Products Catalog [Digest Version]

A wide range of stainless steel chains and stainless steel fittings manufactured in-house!

This catalog is a digest version featuring stainless steel products (chains and fittings) from Mizumoto Machinery Manufacturing Co., Ltd., which manufactures and sells chains, fittings, and joints made from stainless steel, copper, brass, aluminum, titanium, and a wide range of steel types. We introduce a variety of products, including "stainless steel chains" that beautifully harmonize in nature and urban environments, and "stainless steel mooring rings" that do not require replacement for a semi-permanent installation. [Featured Products] ■ Chains ■ Stainless Steel Fittings ■ Stainless Steel Mooring Rings ■ Stainless Steel Cleaning Baskets, etc. *For more details, please download the PDF or feel free to contact us. *This PDF is a digest version. For those who need the full version or more details, please inquire.

Company：水本機械製作所
Price：Other

stainless
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless steel

The variations of vibration patterns are endless! You can achieve various textures.

"Stainless steel" is a product that can undergo various processing and surface treatments. Thanks to processing and surface treatment technologies, a wide range of textures can be achieved. While stainless steel is generally associated with the strong reflection of a "shiny metal," it can also create a matte atmosphere. Advanced polishing techniques allow for various expressions on the surface. [Features] - Various polishing processes are possible - The variations of vibration patterns are endless - The angle of cross HL can also be selected *For more details, please refer to the PDF document or feel free to contact us.

Company：エヌ・エス・ケーニシダ工業
Price：Other

stainless
stainless

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

stainless Product List and Ranking from 66 Manufacturers, Suppliers and Companies | IPROS GMS

stainless Manufacturer, Suppliers and Company Rankings

stainless Product ranking