We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for test.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

test Product List and Ranking from 66 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

test Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

  1. ガイオ・テクノロジー Tokyo//IT/Telecommunications
  2. フォス･ジャパン Tokyo//Testing, Analysis and Measurement
  3. 日本人材開発医科学研究所 Tokyo//others
  4. 4 null/null
  5. 5 エス・ブイ・シー東京 Kanagawa//Testing, Analysis and Measurement
Go to Company Ranking

test Product ranking

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

  1. Embedded Software Unit Testing "Coverage Master winAMS" ガイオ・テクノロジー
  2. System Engineer Aptitude Test "Research" 日本人材開発医科学研究所
  3. Lateral flow mycotoxin quantification test (for DON) フォス･ジャパン
  4. 4 Small IC test clip | World's smallest! Ultra-low resistance! For testing fine ICs.
  5. 4 Hot Tube Test エス・ブイ・シー東京

test Product List

31～60 item / All 109 items

Displayed results
Lateral flow mycotoxin quantification test (for DON)

Lateral flow mycotoxin quantification test (for DON)

No harmful substances in waste liquid! Quantitative kit compatible with a wide variety of grain tests.

This product is a rapid and simple DON testing kit designed for various grains and feed ingredients, including wheat, rice, and corn. The kit includes a WET kit that can be extracted with a special extraction powder and water, and a FAST5 kit that can be extracted with distilled water. It can test from a single sample as needed, and due to its simple operation method, anyone can perform reliable quantitative tests, making it flexible for use in various scenarios such as grain acceptance sites, grain ingredient testing, and cereal research laboratories. 【Features】 - Supports a wide variety of grain tests - Allows quantitative testing with just 5 minutes of incubation - Can detect residual concentrations at the ppm level (requires CharmEZ-M reader) - GIPSA (U.S. Grain Inspection, Packers and Stockyards Administration) certified (FAST5 kit) - Includes positive control sample (1000ppb DON) - Compatible with CharmEZ-M and ROSA-M readers *For more details, please refer to the PDF materials or feel free to contact us.

  • image_05.jpg
  • others
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Red Team Operation Test

Red Team Operation Test

We will find security "holes"! Attack scenarios can be customized according to the implementation purpose.

The "Red Team Operation Test" is a simulation test based on actual cyber attacks. It investigates whether the security measures implemented by the organization are functioning effectively against the set attack objectives, and what kind of damage can be expected when an attack occurs. The effectiveness of the security measures is assessed, and proposals for improvement are made. 【Features】 ■ Conducted by hackers with extensive experience in responding to various cyber incidents ■ Provides services that combine expertise in vulnerability assessment, forensics, and more ■ Reduces labor and costs by offering templated attack scenarios ■ Attack scenarios can be customized according to the client's objectives *For more details, please refer to the PDF document or feel free to contact us.

  • Other security
  • Remote Control
  • Other services
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Service] Free Cutting Test

[Service] Free Cutting Test

Free cutting test service provided by the chip saw manufacturer. Evaluation of the cutting surface, selection of chip saw specifications, and determination of cutting conditions tailored to the customer, etc.

Our free cutting test service offers complimentary cutting tests on a wide range of materials, allowing for the evaluation of the cut surface of the actual workpiece (such as the cleanliness of the cut surface and the condition of burrs). Additionally, as a manufacturer of saw blades, we can also provide consultations on selecting the appropriate saw blade specifications for the materials being cut during the free cutting test, as well as determining cutting conditions tailored to the customer (such as saw speed and feed rate). If you have any concerns, please feel free to reach out to us.

  • Other cutting tools
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mask fit test

Mask fit test

Tests must be conducted once a year, and the results must be stored for three years as required by the operator!

The "mask fit test" is conducted to evaluate whether the mask fits closely to the wearer's face. Even if the mask has excellent filter performance, it cannot demonstrate its intended effectiveness if it does not fit the face properly. Therefore, it is necessary to confirm both the filter performance and the fit to the face. Using a dedicated measuring device, the number of dust particles inside and outside the mask is measured to determine the fit factor. If this value exceeds the required fit factor, the test is considered passed. 【Flow of the Mask Fit Test】 ■ Preparation for the fit test ■ Explanation and observation by the fit test administrator ■ Conducting the fit test ■ Recording and storing the fit test results *For more details, please download the PDF or feel free to contact us.

  • Other Testing Contract
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Application testing using medium and high coupling well plates.

Application testing using medium and high coupling well plates.

BIOMAT's polystyrene medium-binding and high-binding well plates are ideal devices for the binding of biomolecules optimal for ELISA tests.

This is an application note that describes the adsorption tests of biomolecules using BIOMAT's polystyrene medium-binding and high-binding well plates, which are used in immunological research such as enzyme-linked immunosorbent assay (ELISA). Here, we specifically use proteins with known amino acid compositions and provide examples of coating various biomolecules on BIOMAT's medium-binding and high-binding well plates. [Test Contents] - Adsorption of bovine serum albumin - Adsorption of human IgG - Adsorption of poly-DL-alanine (M.W. 1,000-5,000)

  • Other laboratory equipment and containers
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bar material processing machinability test

Bar material processing machinability test

Evaluation tests for machinability! We also provide test bars for machinability evaluation.

What are your thoughts on switching from forged and welded products made of SC material to cast iron for reducing processing costs? This can be achieved by adopting unprocessed high-strength cast iron. It is possible to produce FCD800 and FCD900 in an as-cast state without heat treatment, eliminating concerns about distortion or expansion caused by heat treatment. If you are considering reducing processing costs or looking for alternative materials, please consider our high-strength cast iron (FCD). We also provide evaluation and test bars for machinability. 【Features】 ■ Achievable by adopting unprocessed high-strength cast iron ■ Production possible in an as-cast state without heat treatment ■ No concerns about distortion or expansion due to heat treatment *For more details, please refer to the PDF document or feel free to contact us.

  • Contract manufacturing
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cloud-based application testing "InsightAppSec"

Cloud-based application testing "InsightAppSec"

Web application vulnerabilities can be easily mitigated without specialized knowledge!

"InsightAppSec" is a cloud-based application testing tool that automatically crawls and evaluates web applications, inspecting for vulnerabilities such as SQL injection, XSS, and CSRF. With an advanced UI and an intuitive workflow developed on the Insight platform, it can be easily deployed, managed, and operated. You can also use an optional on-premises engine to scan applications hosted on a closed network. 【Features】 ■ Protects advanced web environments ■ Rapid collaboration ■ Effectively manages security assessments of application portfolios, regardless of scale *For more details, please download the PDF or feel free to contact us.

  • Software (middle, driver, security, etc.)
  • Other security
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Emotional AI Analytics Application "Catchphrase and Banner Test"

Emotional AI Analytics Application "Catchphrase and Banner Test"

Solving the problem of having few opportunities for user testing of catchphrases and banners!

We would like to introduce the feature "Catchphrase/Package Analytics" in the AI tool "Kansei AI Analytics" for testing catchphrases and banners. Visualize the effectiveness of catchphrases and banners instantly. Even catchphrases and banners that are usually not subjected to research can be determined based on quantitative data using this tool. This can solve the problem of having few opportunities for user testing of catchphrases and banners. 【Features】 ■ Instantly visualize the effectiveness of catchphrases and banners ■ Even catchphrases and banners that are usually not researched can be determined based on quantitative data using this tool *For more details, please refer to the related links or feel free to contact us.

  • Business Intelligence and Data Analysis
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fast Penetration Test

Fast Penetration Test

Devices facing the internet, such as firewalls and mail servers!

Our "Fast Penetration Test" utilizes not only commonly used tools but also our proprietary AI tools. It detects advanced attacks such as business logic flaws, DoS, and zero-day attacks. We also attempt attacks that mimic actual hacker techniques and combine multiple vulnerabilities. Thanks to this advanced technology and unique tools, we can conduct tests in a short period and discover vulnerabilities that are generally difficult to find. 【Pricing Features】 ■ Course-based pricing - A tiered pricing structure is set to ensure lower costs for smaller system sizes. ■ Fixed pricing - Regardless of the number of pages or requests, we offer a fixed pricing structure per "IP address/FQDN/application" tailored to customer needs. *For more details, please refer to the PDF document or feel free to contact us.

  • Other security
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
System Engineer Aptitude Test "Research"

System Engineer Aptitude Test "Research"

We will assess the suitability for the role of a system engineer from both the aspects of "intellectual functioning" and "emotional characteristics."

The information processing industry is entering a period of significant change. The importance of considering suitability in the recruitment and placement of information processing engineers is increasingly recognized. Our system engineer aptitude test "Research" aims to assess the suitability of system engineers and provide information for optimal personnel placement. 【Research Specifications】 ■ Purpose: To assess suitability as a system engineer ■ Target: General adults (18 years and older) ■ Format: Objective test using a mark sheet ■ Duration: 90 minutes ＼ For more details, please check by downloading the catalog ／

  • others
  • Technical Seminar
  • Vocational Training/Technical School
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Carbon fiber bonding test

Carbon fiber bonding test

Introducing tests conducted with special bonding and dissimilar bonding using our company's proprietary technology!

We would like to introduce the "Carbon Fiber Bonding Test" conducted by our company. We performed special bonding using our proprietary technology after cutting a plate, which was compressed by heat pressing epoxy liquid resin and unbaked carbon fiber, into two parts. Additionally, we conducted heterogeneous bonding between carbon fiber after high-speed baking and a special resin that possesses lightweight, impact resistance, and flexibility. [Test Details] ■ Special bonding was performed using our proprietary technology after cutting a plate, which was compressed by heat pressing epoxy liquid resin and unbaked carbon fiber, into two parts. ■ Heterogeneous bonding was conducted between carbon fiber after high-speed baking and a special resin that possesses lightweight, impact resistance, and flexibility. *For more details, please refer to the PDF document or feel free to contact us.

  • fiber
  • Other services
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super hard rotary grinding sludge recovery practical test

Super hard rotary grinding sludge recovery practical test

Recovery of super hard grinding sludge (rare metals) is possible! This has led to cost reduction.

We conducted a practical test using the sludge recovery device "M1-250M" to improve issues such as line stoppage during sludge recovery and inefficiencies in manual labor. Both the recovery time and quantity have been significantly improved, and it has become possible to recover ultra-hard grinding sludge (rare metals) without stopping the operating line, leading to cost reductions. Regarding the recovery of ultra-hard metal grinding sludge (rare metals), this product has made it possible to dewater along with sludge recovery. 【Specifications of the M1-250M Standard Unit】 ■ Power used: Air only, operating at 0.3MPa to 0.4MPa ■ Maximum processing capacity: 80L/min to 90L/min (due to variations in air flow) ■ Sludge recovery capacity: Approximately 10kg ■ Total weight of the device: Approximately 63kg *For more details, please refer to the PDF document or feel free to contact us.

  • Oil-water separator
  • Water treatment equipment
  • Wastewater/wastewater treatment equipment
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aluminum cutting sludge recovery and oil-water separation practical test

Aluminum cutting sludge recovery and oil-water separation practical test

Achieved 24 times longer life! We have not disposed of cutting oil for 6 years.

At the aircraft parts machining factory, machining is performed by cutting parts from aluminum blocks, and aluminum microparticles (μ) with little specific gravity difference from the cutting oil are floating up, adhering to the mineral oil as sludge. Additionally, there is a high possibility of causing defects in the product accuracy of the machined parts, and it can also lead to foul odors, which is why the entire cutting oil is discarded four times a year. As a result of conducting a practical test using the oil-water separation device "LSSII-ECO Standard Unit," sludge containing aluminum microparticles mixed in the cutting oil was separated and recovered from the mineral oil. Since its introduction, we have achieved a long life of 24 times without discarding the cutting oil for six years, and we are continuing tests for further long life. [Overview] ■ Oil-water separation device used: LSSII-ECO Standard Unit ■ After 30 minutes of practical testing: Separation and recovery of sludge and mineral oil containing floating aluminum microparticles (μ) *For more details, please refer to the PDF document or feel free to contact us.

  • Oil-water separator
  • Water treatment equipment
  • Wastewater/wastewater treatment equipment
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mineral sludge recovery and oil-water separation practical test

Mineral sludge recovery and oil-water separation practical test

Introducing a practical test that achieved 16 times longer life without disposing of cutting oil for 8 years!

In the mineral cutting processing stage of a major machine tool manufacturing company, mineral sludge adhered to mineral oil and floated in an 800L coolant tank. Over time, it absorbed moisture and settled, leading to the proliferation of bacteria and causing decay. Additionally, although the cutting oil was still usable, it was completely discarded within five months due to the presence of mineral oil and mineral sludge. As a result of a practical test using the oil-water separation device "LSSII-ECO Standard Unit," mineral oil and mineral sludge mixed with the cutting oil were separated and recovered. After implementation, the cutting oil was not discarded for eight years, achieving a 16-fold increase in longevity, and long-life tests are still being conducted. [Overview] ■ Oil-water separation device used: LSSII-ECO Standard Unit ■ Cutting oil values after practical testing: 7.7 *For more details, please refer to the PDF document or feel free to contact us.

  • Oil-water separator
  • Water treatment equipment
  • Wastewater/wastewater treatment equipment
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Demonstration! Cost Reduction of Automated Testing Using NI TestStand

Demonstration! Cost Reduction of Automated Testing Using NI TestStand

Demonstration! Cost Reduction of Automated Testing Using NI TestStand [Technical Document] Presentation Materials from the Automated Measurement Forum 2010

Improvement of reusability and maintainability Simplification and efficiency of inspection procedure changes Simplification and efficiency of inspection procedure development

  • Tester
  • Other FA equipment
  • Development support tools (ICE, emulators, debuggers, etc.)
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Research and testing for new product development with customers: "Multi-Test Coater"

Research and testing for new product development with customers: "Multi-Test Coater"

With a rich coating head, it is possible to coat various substrates such as films, metal foils, and synthetic papers! We support suitable coating equipment to meet customer needs.

We would like to introduce the "Multi-Test Coater" that we handle. At Kobayashi Seisakusho's research and testing facilities, we support suitable coating equipment that meets customer needs by conducting research and testing for new product development in collaboration with our customers. With a variety of coating heads, it is possible to coat various substrates such as films, metal foils, and synthetic papers. 【Use Cases】 Company A: Considering the introduction of coating equipment, what kind of coating head should be selected? Company B: Would like to conduct tests to investigate the causes and solutions for coating troubles. Company C: Would like to conduct tests aimed at data collection for new product development. *For more details, please download the PDF or feel free to contact us.

  • Other painting machines
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Embedded Software Unit Testing "Coverage Master winAMS"

Embedded Software Unit Testing "Coverage Master winAMS"

Coverage measurement tool 'used by everyone' for embedded software development unit testing

"Coverage Master winAMS" is a unit testing tool for embedded software in C/C++ that complies with the functional safety standards ISO 26262 / IEC 61508, capable of measuring code coverage such as statement, branch, MC/DC, and function calls. It includes a microcontroller simulator that executes the compiled object code for unit testing. Unlike typical unit testing tools that are limited to logical-level unit testing of C source code, it conducts the most faithful and reliable unit tests on microcontroller code, including issues dependent on the implementation specific to embedded systems. (Supports C++ 11/14) 【Features】 - Executes unit tests based on "actual machine code," leading to increased efficiency - Fully supports C0, C1, and MC/DC coverage, as well as function/call coverage measurement during the integration phase - Efficiently generates test data from both white-box and black-box perspectives - Seamlessly creates, executes, and verifies coverage comprehensive test data within the tool - Provides options for efficiently conducting Back to Back testing

  • Development support tools (ICE, emulators, debuggers, etc.)
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multi-probe × Fixture-less JTAG Boundary Scan Test

Multi-probe × Fixture-less JTAG Boundary Scan Test

A JTAG testing experience without the need for fixtures, realized with flying probes and multi-probes.

This is a demo video of Takaya's flying probe tester performing fixtureless JTAG boundary scan testing, showcased at NEPCON JAPAN 2026 (Tokyo Big Sight). In this demo, we utilize the optional multi-probe system to achieve stable access to JTAG signals and smooth test execution. The video captures the demo that was actually operating at the exhibition booth, allowing you to see the probing actions and the flow of the boundary scan execution.

  • Circuit Board Inspection Equipment
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Precision heat treatment test

Precision heat treatment test

Various tests can be conducted over a wide temperature range! Leave it to us for solution heat treatment and sub-zero treatment!

At Ueshima Heat Treatment Works, we offer "Precision Heat Treatment Tests." We can perform various tests over a wide temperature range, including quenching and tempering, austempering, sub-zero treatment, annealing, and aging hardening. Additionally, we are open to consultations for other tests as well. Please contact us for more details. 【Temperature Range】 ■ Temperature: 140℃ to 1250℃ ■ Accuracy ・±5℃ (standard) ・±2℃ (special management) *For more details, please refer to the PDF document or feel free to contact us.

  • Other contract services
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Film Coating Contract Testing

Film Coating Contract Testing

Contract manufacturing of 10mm□ to G8 substrates is possible. Custom orders for small lots are available. We cater to a variety of needs.

**Features** We will fully support our customers' technology and prototype development. By leveraging our technical skills, proposal capabilities, and proactive approach in coating, printing, and laminating, we aim to become a reliable and trustworthy business partner for our customers. 1. We can process substrates from 10mm square to G8. 2. To meet our customers' needs, we flexibly respond with joint development, prototype processing, and custom orders in small lots. 3. We also offer sales and rentals of testing equipment, providing proposals tailored to our customers' applications and environments. **Target Substrates and Workpieces** Glass: 10mm square to G8 size Wafers: Φ2 inches to Φ300mm Functional films: MAX 400×500mm Optical lenses, precision small parts, etc. **Coating Materials and Viscosity** - Various chemicals: resist, ink, paste, resin-based, etc. - Viscosity: from a few cp to 10,000 cp - Film thickness: 1 to 100μm **Main Applications and Examples** - Universities, research and development institutions, AIST, material and material development, precision parts, optical components - Pharmaceutical research applications, precision mold parts for automobiles, cosmetics, electronic devices, semiconductors, liquid crystals

  • Coater
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Sensor simulation" that can be utilized in automated testing and verification.

"Sensor simulation" that can be utilized in automated testing and verification.

Automate testing and verification with sensor simulation to reduce labor costs! We will build automated testing facilities in a short period of time.

"Sensor Simulation" allows for the rapid establishment of automated testing facilities by using pseudo-sensors corresponding to the following, thereby reducing testing and verification time. ■ Temperature, Pressure (Strain), Force, Angle Sensors Program Resistance / Module ■ Thermocouples Thermocouple Simulation Module ■ Position Sensors (LVDT, RVDT, Resolver) LVDT / RVDT / Resolver Simulation Module ■ Axle Speed Sensors Arbitrary Signal Generator / Module ■ Various Sensors (mainly sensors that sense values in the current range of 4-20mA) Current Loop Simulation Module

  • Sensors
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[BGA compatible! Implementation board test] JTAG test

[BGA compatible! Implementation board test] JTAG test

We are publishing case studies on the introduction of JTAG boundary scan testing!

JTAG board testing tool compatible with BGA-mounted boards - Inspection of high-density mounted boards via JTAG - Instant diagnosis of solder bridges and open faults - Display of fault locations on the board layout diagram - Onboard flash memory and PLD writing - Portable USB controller - Comprehensive "peace of mind" user support

  • Testing Equipment and Devices
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Semiconductor Test Solutions: System Level Testing

Semiconductor Test Solutions: System Level Testing

Achieved 100% test coverage! Capable of conducting official real-use environment tests in fields such as EV, 5G, and AOI!

With the advancement of high functionality, the vast amount of measurements and ultra-high-speed interfaces due to miniaturization have made complete defect detection with ATE increasingly difficult. As a solution to these issues, we propose system-level testing (SLT: testing in actual usage environments). Why is system-level testing necessary? With the evolution of EV, 5G, AOI, etc., semiconductor ICs are transitioning from standalone to system ICs (SoCs), and higher functionality is being demanded. Along with this increased functionality, the vast number of measurement items and ultra-high-speed interfaces due to miniaturization have made complete defect detection with ATE challenging. Therefore, system-level testing (SLT: testing in actual usage environments) has become necessary. Chromo's SLT handler significantly contributes to this field and continues to evolve to meet customer needs.

  • Dedicated IC
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Digital Durometer II for Rubber

Digital Durometer II for Rubber

Digital Durometer II for Rubber

With this single unit, you can conduct the following tests: - IRHD hardness test… Micro/Normal/High/Low/Super Soft - Shore hardness test… A/B/C/D/DO/O/OO/OOO <Features> - High precision and high reproducibility. - Automatic measurement with just the press of a start button. - One-touch detector replacement. - Creep/recovery curves can be obtained (with dedicated software). <Rubber Hardness Detector> The replacement of the digitest hardness detector is simple and one-touch. Just plug the detector into the connector on the main bracket, and the controller will automatically recognize it, allowing you to immediately conduct the rubber hardness test. There is no need for troublesome adjustments before testing. We offer a variety of detectors to accommodate different sample shapes and testing methods.

  • Testing Equipment and Devices
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fuzzing Test "Defensics"

Fuzzing Test "Defensics"

Identify software vulnerabilities and enhance the robustness of the software and the interoperability of the system!

The fuzzing test "Defensics" is a comprehensive and powerful automated black box solution that effectively and efficiently detects and fixes software security vulnerabilities. By incorporating a systematic and intelligent approach to negative testing, it enables the coexistence of product innovation and software security without impacting time-to-market schedules or operational costs. It features a logical user interface, allowing users to easily perform advanced fuzzing tests simply by following on-screen instructions. 【Features】 ■ Intelligent fuzzing engine ■ Comprehensive fuzzing solution ■ Adaptable to various development lifecycles ■ Supports efficient fixes with reports containing a large amount of detailed data ■ Scalable fuzzing tests through automation *For more details, please refer to the PDF materials or feel free to contact us.

  • Software (middle, driver, security, etc.)
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Chemix-made urethane bearing running test adhesive peeling test

Chemix-made urethane bearing running test adhesive peeling test

Running test of Chemix-made urethane bearings.

This is an introduction to the performance testing of Chemix Industrial's urethane bearings. If you have any questions regarding the explanation below, please feel free to contact us. ■Test Details■ Performance testing of Chemix Industrial's urethane bearings was conducted under high load (as per the conditions below). ■Results■ ★No abnormalities found in Chemix Industrial's urethane bearings after 24 hours of operation★ 【Chemix Industrial Urethane Bearings】 ■Operating Time: 24 hours ■Operating Conditions: Please refer to the catalog. ■Results: No abnormalities after 24 hours *For other functions and details, please download the PDF or feel free to contact us.

  • Sorting machine
  • Plastic bearings
  • Rubber
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
DDR3 Data Eye Diagram Test

DDR3 Data Eye Diagram Test

Significantly reduce the time required for analyzing signal integrity conditions!

Compliance testing is essential to ensure that the timing, slew rate, and voltage levels of Dynamic Random Access Memory (DRAM) signals conform to specifications. By utilizing eye diagram testing, the time required for analyzing signal integrity conditions can be significantly reduced, allowing for a quick inspection of signal quality. The following challenges are addressed by the "DDR3 Data Eye Diagram Test": [Challenges] ■ Lack of flexibility to quickly debug signal integrity issues ■ Need for separation of read/write operations ■ Overlapping of consecutive bits within a data burst for testing based on a simple mask *For more details, please refer to the PDF document or feel free to contact us.

  • Other electronic measuring instruments
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Field test of NB-IoT using R&S CMWcards

Field test of NB-IoT using R&S CMWcards

Intuitive and easy to use! Can be used to replicate field tests in a lab environment!

"R&S CMWcards" is an intuitive and user-friendly software application that can be used to replicate field tests in a lab environment. Issues discovered during field tests are often difficult to reproduce due to the dynamic nature of real-world environments. This makes it challenging to validate fixes. By combining the "Field-to-Lab (F2L) application" with this product, you can replicate real network scenarios in a lab environment. This allows for the investigation of most field-related issues in a controlled, reproducible, and deterministic manner. 【Features】 ■ CMWcards can be used without any programming knowledge. ■ By simply setting up the arrangement of cards, you can create signaling test scripts that simulate various test scenarios and validate the protocol behavior of devices. ■ Signaling flows comply with standards. *For more details, please refer to the PDF materials or feel free to contact us.

  • Other information systems
  • others
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Digital Outer/Inner Quick Test

Digital Outer/Inner Quick Test

Minimum display value 1μm, inductive charging technology and ergonomic design, optimized new design, fast reading, accurate measurement, display and storage of measurement results.

●5 models: C015/C015S/G002/G005/G010 ●Measuring range (for outer side): 0 to 15mm ●Measuring range (for inner side): 2.5 to 25mm ●Minimum display value: 0.001mm ●Manufacturer: Kreplin (Germany)

  • Other measurement, recording and measuring instruments
  • test

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to test

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.