We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Current Sensors.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Current Sensors(20a) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.

Current Sensors Product List

16～30 item / All 35 items

Displayed results
Current sensor

Current sensor

Integrating busbars and sensors! We meet various needs with a wide range of products!

We offer a "current sensor" that supports high-precision current measurement and abnormal current detection. The features of this current sensor enable high-precision current detection using a shunt element. We have available the analog sensor "SBC-D300," which can measure large currents up to ±2,000, the high-precision digital sensor "DST-Module" with an insulated circuit, the high-precision non-contact sensor "USM contactless series," and the shunt busbar with a connector "C-Shunt," among others. Please feel free to consult us if you have any requests. 【Product Lineup】 ■SBC-D300 ■DST-Module (ACIL-C compliant) ■USM contactless series ■C-Shunt, etc. *For more details, please download the PDF or feel free to contact us.

  • Sensors
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analog AC current sensor

Analog AC current sensor

For measuring AC current in AC motors, lighting fixtures, air compressors, etc.

This product is a sensor used for measuring AC current. When you want to measure AC current, cutting the actual wiring can be dangerous, but the analog AC current sensor developed by DFRobot solves this problem. Place the AC wire inside the unit, use a 3.5mm jack connector to connect the unit to the sensor board, and then connect the sensor board to the analog input of the microcontroller. This sensor can be used to measure AC motors, lighting fixtures, air compressors, or other devices that use AC current. 【Features】 ■ Measurement possible without cutting the wiring ■ Supports Gravity 3-pin interface ■ Analog output *For more details, please refer to the external link or feel free to contact us.

  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Electronic Components] Current Sensor L01ZxxxS05 Series

[Electronic Components] Current Sensor L01ZxxxS05 Series

This is a current sensor ideal for medium-capacity general-purpose inverters!

The "L01ZxxxS05 series" is a magnetic proportional current sensor that can be utilized in medium-capacity general-purpose inverters. With a compact design, it offers 8 models in one series, supporting rated currents from 50 to 600A. The saturation current is 1.25 times the rated current, featuring a wide measurement range. 【Features】 ■ Compact design ■ 8 models in one series supporting rated currents from 50 to 600A ■ Wide measurement range (saturation current is 1.25 times the rated current) ■ PCB mountable ■ Through-hole dimensions: □15×8mm For more details, please contact us or download the catalog.

  • Sensors
  • Other power sources

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Shunt Current Sensor "VSM0001"

Shunt Current Sensor "VSM0001"

Shunt current sensor capable of detecting currents up to ±400A with built-in isolation amplifier.

The VSM0001 is an insulated current sensor that integrates a high-current shunt from the HS series with a detection circuit. It is compact (L×W×T: 72mm×36mm×13mm) and lightweight (approximately 30g), contributing to the miniaturization and space-saving of existing sensors. It is suitable for high-precision current detection in automotive, industrial equipment, and energy sector battery management applications. 【Features】 ■ Measurement current range: ±400A (at fastening part below 75℃) ■ Detection accuracy: ±1% or less @ 25℃ ■ Low loss (detection part resistance value: 100μΩ) ■ Supports insulation between current path and output signal (using insulated amplifier) *For more details, please refer to the PDF document or feel free to contact us.

  • Company：KOA
  • Price：Other
  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Analog 50A current sensor (AC / DC)

Analog 50A current sensor (AC / DC)

It is possible to monitor the current of the project every second for energy saving and circuit protection.

This product is a breakout board for the fully integrated Hall effect-based linear ACS758 current sensor. It provides accurate current measurements for both AC and DC signals, and the thickness of the copper conductors allows the device to survive in high overcurrent conditions. The ACS758 outputs an analog voltage signal that varies linearly with the detected current. 【Features】 ■ Arduino interface compatible ■ Standard bandwidth of 120 kHz ■ 3μs output rise time in response to step input current ■ Output voltage proportional to AC or DC current ■ Factory calibrated for accuracy, etc. *For more details, please refer to the external link or feel free to contact us.

  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Medium-sized standard AC current sensor "CTL-24-TE"

Medium-sized standard AC current sensor "CTL-24-TE"

AC current sensor General measurement CTL general-purpose series

This is a medium-sized series product with a φ24 hole for output lead wire type.

  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
A current sensor that detects the ON/OFF of current and outputs a relay without the need for a power supply.

A current sensor that detects the ON/OFF of current and outputs a relay without the need for a power supply.

Detects the current of lighting and devices! Immediately notifies you of the ON/OFF status.

The "ON/OFF Detection Switch" measures load current and detects the ON/OFF status of lighting fixtures, fans, pumps, etc., continuously outputting the ON or OFF state through relay contacts. It can be easily and inexpensively constructed for counting ON states or monitoring ON/OFF conditions. It requires no power supply and is compact in size, making it easy to implement in existing equipment. It is also ideal as a substitute for AC current meter relays. 【Features】 ■ Integrated current sensor and relay switch ■ Detects ON/OFF of load current and outputs through relay contacts ■ No power supply needed for the sensor, compact size allows easy integration into existing equipment ■ A wide variety of models to meet diverse needs ■ Enables timely inspections and cost reduction * For detailed specifications, please download the catalog or contact us directly. ★ We are currently seeking sales agents. Please feel free to contact us! ★

  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Output lead wire type compact AC current sensor "CTL-12L-8"

Output lead wire type compact AC current sensor "CTL-12L-8"

AC current sensor General Measurement CTL Universal Series

This is a miniaturized version of a φ12 hole output lead wire type.

  • Sensors

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Current Sensors

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.