Electric lock - メーカー・企業105社の業務用製品ランキング

Wandering Notification Tatsu-kun (Portable Receiver) HS-WK(KE)

Use seat sensors placed on wheelchairs or chairs.

■Features ● This is a combination product of the seat sensor "BSP-33," the jack-equipped transmitter "HC-116(B)," and the tabletop receiver "HC-350"/portable receiver "RXF-60K." ● The radio registration settings have been pre-configured for immediate use. ● If the user gets off (or falls from) the wheelchair, the receiver installed within 100 meters will notify you. (However, the distance may be shorter depending on surrounding conditions, such as being inside a reinforced concrete building.) ■Seat Sensor - Everyday waterproof design ● Detection output: No-voltage a contact (when pressure is applied) ● Pressure sensitivity: 1.6–1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● Dimensions: 330 × 330 × 6 mm ● Lead wire: 1m Kevlar wire cable (cream color/RCA plug included) ■Dedicated Jack-equipped Transmitter ■HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Wandering Notification Detection Device - Desktop Receiver Set HS-103(T)

We will notify your family 100 meters away. The tabletop receiver will alert you with a flash and melody.

■Quickly catch wandering elderly individuals ■Sensors installed near exits quickly detect the movements of wandering elderly individuals and notify you via receivers set up within 100 meters. ■This helps protect the safety of the elderly and reduces the burden on their caregiving families. ■Notification through sound and light ■When wandering is detected, the receiver installed within 100 meters alerts you with melodies and flashes. ■Installable anywhere without location restrictions ■The sensor is battery-operated, allowing installation in places without power. ■Additionally, it is wireless, eliminating the need for wiring work, and it is compact and unobtrusive. ■Wandering Notification Detection Set ■We offer a lineup of combinations with two types of transmitters and three types of receivers, totaling six variations.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Wandering Notification Haruo-kun HCS-CS30(T)

It is a sensor with two functions: "Wandering Notification" and "Emergency Call." It is easy to use; just clip it to something you want to be notified about when it is moved away.

■Operation ■The clip emergency sensor transmitter can be attached to items you want to be notified about when they are moved or separated. When the string is pulled, it sends a low-power radio signal to a receiver within 100 meters to alert you. ■Clip Emergency Sensor Transmitter 《Two Convenient Functions》 ●The call button on the main unit can be used for emergency or calling purposes. ●You can use it by clipping it onto items you want to be notified about when they are moved away. 《Easy Installation and Operation with Abundant Accessories》 ●You can use the included long and short clips and carabiners for various purposes. ●The transmitter can be easily mounted using the included double-sided tape or Velcro tape. 《With On/Off Switch》 ●It comes with an on/off switch for staff or family members. (The main unit's "call" button operates continuously regardless of the ON/OFF status.) ●The transmitter uses two AA alkaline batteries and can last for about 5 years (if transmitting 10 times a day). It has a low battery alert function. 《No Wiring Required》 ●The radio signal reach from the transmitter to the receiver is approximately 100 meters in line of sight. It can be easily installed in homes or facilities. ●The clip with the string has a safety feature that allows it to detach when a certain amount of force is applied.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Multifunctional Emergency Notification Device HEC-610

One-touch emergency call! It is a multifunction type that can also connect with various sensors.

■Easy operation with large buttons ■Adopted large push buttons that are easy to operate for the elderly. ■Up to 10 emergency contacts can be registered ■During an emergency call, it will redial up to 9 times to a maximum of 10 registered contacts. (One answered call will end the emergency notification.) ■Optional message addition is possible ■During an emergency call, it will notify with a 'custom (voice recording up to 15 seconds) + fixed (about 6 seconds, selectable from 16 types)' message. ■System expansion is possible with 6 input contacts and 2 control outputs ■It has 6 input contacts for activating the emergency call, one powered output for LED indicators, and one voltage-free contact output that can also be used for remote control. ■A talkable wireless push button (optional) is available ■You can use up to 8 optional subunits 'talkable wireless push button [TPC-30]'. (Radio range approximately 20m in line of sight) ■Register 3 frequently dialed numbers to one-touch buttons By pressing the one-touch button on the main unit, it will automatically dial without lifting the receiver, allowing for hands-free conversation directed towards the main unit.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Emergency Call Set Portable Receiver Set ECS-1P(KE)

In case of emergency, simply press the transmitter to call the staff. The tabletop receiver will notify you with a flash and melody.

■Emergency Call Set ■The Emergency Call Set features two types of transmitters and three types of receivers, offering six combinations. - ECS-1P(T): TXF-110, HC-350 set - ECS-1P(KE): TXF-110, RXF-60K set - ECS-1P: TXF-110, HC-300 set ■Selectable Transmitters for Various Uses ● TXF-110 A pendant-type transmitter that is easy for the elderly to press even in emergencies. It has a waterproof structure suitable for daily life. ● TX-122 A pendant-type transmitter (not waterproof) that sends a signal by pressing both buttons on the sides simultaneously. ■Selectable Receivers for Various Uses ● HC-350 (Desktop Receiver) This desktop model can be used immediately by simply plugging the included AC adapter into an outlet. It allows you to choose from eight melodies or chimes and visually alerts you with a built-in flashlight. The alert duration can be selected from seven options ranging from 3 seconds to 120 seconds, including "continuous." The transmission range of the transmitter is approximately 100 meters in line of sight. ● RXF-60K (Portable Receiver) Compact and lightweight, rechargeable with a dedicated charger included. The radio frequency is already registered.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Emergency Call Set Installation Type Receiver Set ECS-1P

In case of emergency, simply press the transmitter to call the staff. The tabletop receiver will notify you with a flash and melody.

■Emergency Call Set The emergency call set features two types of transmitters and three types of receivers, offering six combinations. - ECS-1P(T): TXF-110, HC-350 set - ECS-1P(KE): TXF-110, RXF-60K set - ECS-1P: TXF-110, HC-300 set ■Selectable Transmitters for Various Uses ● TXF-110 A pendant-type transmitter that is easy for the elderly to press even in emergencies. It has a waterproof structure suitable for daily life. ● TX-122 A pendant-type transmitter (non-waterproof) that sends a signal by pressing both buttons on the sides simultaneously. ■Selectable Receivers for Various Uses ● HC-350 (Desktop Receiver) This desktop model can be used immediately by simply plugging the included AC adapter into an outlet. You can choose from eight melodies or chimes, and it visually alerts you with a built-in flashlight. The notification duration can be selected from seven options ranging from 3 seconds to 120 seconds, as well as a "continuous" option. The transmission range of the transmitter is approximately 100 meters in line of sight.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Emergency Call Set Receiver Portable Set EC-B(KE)

In case of an emergency in the bathroom, it can be called wirelessly. It comes with a cord approximately 1.7m long, allowing for installation at high locations.

■For emergency calls in the bathroom or toilet ■Pulling the transmitter's cord or pressing the transmitter's call button will activate the receiver, notifying you with a sound. ■Features ● The main unit, pull cord, and grip rubber are antibacterial. The pull cord is approximately 1.7m long, adjustable for length, and equipped with a safety feature (the joint will detach when a certain force is applied). ● Designed for use in bathrooms, toilets, and outdoors, it has a waterproof structure suitable for everyday life. ● Powered by two AA alkaline batteries, with a battery life of about 5 years when transmitting 10 times a day. ■Wireless, no wiring required ■Uses low-power radio waves, eliminating the need for wiring, and can be easily installed in various locations within the home, not just in the bathroom. ■Operation ● Pulling the cord or pressing the call button will cause the red light to flash, notifying receivers within 100m. ■Radio wave reach distance is approximately 100m in line of sight (between transmitter and receiver) ■The transmitter's radio wave reach distance is approximately 100m in line of sight. ■Extending radio wave reach distance ■By installing a relay unit (RTX-100), the radio waves can be relayed up to twice (for two units), extending the radio wave reach distance.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Wireless Foot Call HCS-FC1(T)

This is a set product consisting of the foot call transmitter "HCT-FC1" and the tabletop receiver "HC-350."

■Features ● Instead of the switches that have been casually pressed by hand, this can be used in medical and caregiving settings to protect against infections such as the coronavirus, as well as for staff calls, automatic door unlocking, and emergency button purposes. ● The switch section employs a seesaw-type pedal that detects pressure from either side. ● Comes with a "protective cover" to prevent accidental activation due to falling objects.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Human Motion Sensor (Exposure Type) HM-1B

Direct reflection method using near-infrared beams. It is a sensor that is not affected by temperature changes. It is suitable for installation in hallways and similar areas.

■Features ● Ideal for detecting movement for life safety alert systems. ● Designed for wall mounting. ● The area beam can be adjusted up to 1 meter with a single unit. ● Can be installed to avoid detecting pets like dogs and cats, making it suitable for pet-friendly use. ● It is a type that does not produce mechanical noise, making it suitable for installation in hallways. *Always connect the motion sensor to the receiver using an AND connection.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Toilet Sensor (Exposed Type) TS-7

In case of emergency! We will notify you if the usage time is long. A sensor that measures distance reduces malfunctions caused by changes in the floor surface.

■Overview ■When used, the toilet sensor detects and outputs signals. ■It detects whether there is movement or if it is stationary. ■If used for a preset time (e.g., 10 minutes) set in advance on the toilet life safety alert device "SAH-2(T)", it will notify you in advance for 5 minutes with a lamp or buzzer. If you do not exit the toilet or press the reset switch during this time, it will notify family members or the management office. ■Distance Measurement ■Seven beams independently measure the distance to the floor and automatically set the detection output height for each. ■It detects the height from the floor. ■Area Setting Changes for the Head ■The sensor head can be adjusted in four stages from 0° to 9°. The area settings can be erased or changed in height, allowing a total of 9 patterns to be selected, including the basic settings, for installation in the toilet. Three Types to Choose From There are two exposed types and one embedded type available, allowing you to select a sensor that fits the installation location. ●TS-7 (Exposed Round Type) Main installation locations: Low ceiling areas, facilities for specific users (private rooms) Features: Exposed type with a small volume and surface area, dome-shaped. However, it has many black window surfaces. ●TS-7U (Embedded Type) Main installation locations: Newly constructed facilities

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Toilet Sensor (Exposed Square Type) TS-7R

If there are remaining individuals in the restroom of public or commercial facilities, it will be detected. It will notify of prolonged usage to prevent accidents or troubles in advance.

■ When the toilet is used, the toilet sensor detects it and outputs a signal. It detects whether someone is moving or stationary. If the toilet is used for a predetermined time (e.g., 10 minutes) set in advance on the toilet life safety notification device "SAH-2(T)," it will notify with a lamp or buzzer for 5 minutes beforehand. If the user does not exit the toilet or press the reset switch, it will notify family members or the management office. ■ Toilet-specific sensor Using unique technology, seven light axes independently recognize the distance from the floor to the toilet seat and automatically set the initial configuration. Of the seven, the central one and one behind it adjust the height of the area for the toilet seat and lid. ■ Notification of long-term use When connected to the toilet life safety notification device SAH-2(T), it will output a signal if the toilet is used for longer than the set time (usage detection: OFF, 5 seconds, 2, 3, 5, 7, 10, 12, 15, 20, 25, 30, 40, 50, 60, 90 minutes). Additionally, it has a system UP function that notifies in advance of the lamp or buzzer alert. ■ Installation locations It can be installed in public facilities such as department stores, supermarkets, train stations, libraries, art museums, museums, and schools.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Area Setting Remote Control TS-A

■Main Features ●The area setting remote control is specifically designed for the toilet sensor "TS-7 series." ●It can be used universally with all toilet sensors in the "TS-7 series." ●By pressing the buttons on the remote control, you can reset the area of the toilet sensor.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Life Safety Sensor, Exposed Type, SA-750

This is a sensor dedicated to the Living Safety Notification System, which adds a time function to the human movement sensor for enhanced living safety notifications!

■Life Safety Sensor This is a dedicated sensor for the 'Life Safety Notification System,' which integrates a "human movement sensor" with the time function of a "life safety notifier." It detects human movement through a passive sensor, and if no movement is detected within a pre-set timer duration, it alerts to a change in daily rhythm. The timer can be set to 15 different durations (20 seconds, 5 minutes, 1, 6, 8, 9, 10, 11, 12, 13, 15, 16, 18, 22, and 24 hours). ■Two Types: Ceiling-Mounted and Recessed It is installed on the ceiling surface of corridors and living rooms used in daily life. With an elegant design reminiscent of downlights, both the ceiling-mounted and recessed types do not compromise architectural beauty. ■User-Friendly Design To eliminate the relay operation sound during detection, a photoMOS relay has been adopted. This allows for a quiet living environment without worrying about the sensor's operational noise. The detection indicator light also uses a gentle green color that is easy on the eyes. ■Pre-Alert Function If no human movement is detected within the set time, a pre-alert output will occur 5 minutes prior. By connecting a buzzer or light, the system can be effectively utilized.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Life Safety Sensor Embedded Type SA-750U

This is a sensor dedicated to the Living Safety Notification System, which adds a time function to the human motion sensor for enhanced living safety notifications!

■Living Safety Sensor This is a dedicated sensor for the 'Living Safety Notification System,' which integrates a "human movement sensor" with the time function of a "living safety notifier." It detects human movement using a passive sensor, and if no movement is detected within a pre-set timer, it alerts to an abnormality in the living rhythm. The timer can be set to 15 different durations (20 seconds, 5 minutes, 1, 6, 8, 9, 10, 11, 12, 13, 15, 16, 18, 22, 24 hours). ■Two Types: Ceiling-Mounted and Recessed It is installed on the ceiling surfaces of corridors and living spaces used in daily life. With a sophisticated design reminiscent of downlights, both the ceiling-mounted and recessed types do not compromise architectural beauty. ■User-Friendly Design To eliminate the relay operation sound during detection, a photoMOS relay has been adopted. This allows for a quiet living environment without worrying about the sensor's operational noise. The detection indicator light also uses a gentle green color that is easy on the eyes. ■Pre-Notification Function If no human movement is detected within the set time, a pre-notification output occurs 5 minutes in advance. By connecting a buzzer or light, the system can be effectively utilized.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Life Sensor Display Panel SSH-5

This is a multifunctional display panel for the life safety notification system.

■Features 1. Channel display panel function (immediately notifies and outputs when there is a contact input) 2. Life safety notification function (notifies and outputs when the set time exceeds) 3. Life sensor display panel function (connects with sensors that have remote input functionality, and the ON/OFF for each channel is linked to the remote output. There is no individual output) Three functions are provided. ■Control each room with the main unit No need for an occupancy confirmation switch or card holder switch; control can be done with the main unit. ■Individual channel input You can operate the ON/OFF switch for each channel, allowing operation only in the necessary rooms when needed. ■Signal input displayed with chime and LED When a signal is input from connected devices, a chime sound and LED display will occur, allowing you to confirm the operational status of the connected devices visually and audibly.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Life Sensor Display Panel SSH-10

This is a multifunctional display panel for the life safety notification system.

■Features 1. Channel display panel function (immediately notifies and outputs when there is a contact input) 2. Life safety notification function (notifies and outputs when the set time exceeds) 3. Life sensor display panel function (connects to sensors with remote input function, and ON/OFF for each channel is linked to remote output. There is no individual output) Three functions are provided. ■Control each room with the main unit No need for an occupancy confirmation switch or card holder switch; control can be done with the main unit. ■Individual channel input You can operate the ON/OFF switch for each channel, allowing operation only in the necessary rooms when needed. ■Signal input displayed with chime and LED When a signal is input from connected devices, a chime sound and LED display will indicate it, allowing you to confirm the operational status of the connected devices visually and audibly.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Channel Display Panel CHT-4

This is a 4-channel display board that notifies with a flash and melody (chime).

■ Signal input notification with flashlight and melody (chime) When a signal is received from the connected device, it will notify you with a flashlight and melody (chime). You can register alert sounds and set ON/OFF for each channel. ■ Output and display mode switching function You can switch between 'hold mode', which continuously outputs until the stop button on the main unit is pressed, and modes of 3 seconds, 6 seconds, 15 seconds, and 30 seconds, allowing for settings according to the system. ■ Chime and melody sounds selectable from various options There are 10 types of alert sounds, including melodies, which can be registered arbitrarily from 1CH to 4CH. The alert (red LED flashing) will sound in conjunction. It does not sound when the volume is OFF.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Channel Display Panel CHN-5(F)

A display panel that shows the signal input of 5 systems with a melody (chime) and flash, capable of communicating with up to 4 locations.

■ Signal input is notified by flashlight and melody (chime). When a signal is input from the connected device, it will be indicated by the chime sound and LED, allowing you to confirm the operational status of the connected device visually and audibly. (a contact and b contact inputs can be selected) - Notification sound: Refer to the notification sound list (can be set for each channel). ■ 5-channel individual input Each channel is equipped with an ON/OFF switch, allowing operation only where and when needed. ■ LED display hold/non-hold The LED can display various indications based on settings. OFF: Off / Standby: Green light / Input: Red blinking In short-time mode, the LED can be set to hold or non-hold. ■ Output/display mode switching function You can switch between 'hold mode', which continuously outputs until the stop button on the main unit is pressed, and 'short-time mode' (3 seconds, 150 seconds, 30 seconds), allowing settings according to the system. ■ Check function When there is an input in the reset state, it will turn red in conjunction and allow for loop checking. (The same applies in the case of communication connection.)

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Channel Display Panel CHN-10(F)

Signal input from 10 systems is displayed with a melody (chime) and flash, and a display panel that can connect up to 4 locations.

■ Signal input is notified by flashlight and melody (chime). The channel display panel indicates the input signal from the connected device through chime sounds and LEDs, allowing for immediate confirmation of the operational status of the connected device. ● Alert sound: Refer to the list of alert sounds (configurable for each channel) ● LED display: OFF: off, standby: green light, input: red blinking ■ In short-time mode, the LED can be set to either hold or non-hold. ■ Output and display mode switching function You can switch between 'hold mode', which continuously outputs until the stop button on the main unit is pressed, and 'short-time mode' (3 seconds, 15 seconds, 30 seconds), allowing for settings according to the system. ■ 10-channel individual input Each channel is equipped with an ON/OFF switch, enabling operation of only the necessary channels when needed. ■ Remote input terminal Operation stops with a make input. The display for each channel and set/reset will turn off. ■ External power supply Provides external supply of DC 12V, 400mA when AC 100V is supplied.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Housing-type pole cover (1 piece) BP-100KP

Existing pole-mounted sensors can easily be converted to housing type.

■Compact Housing Type This is a compact housing type that is easy to install, allowing for simple attachment and excellent design aesthetics. ■Outstanding Security Due to its structure that conceals the interior, the position of the sensor's warning line and the types of sensors installed cannot be identified, providing excellent security. ■Easy Installation Installation is straightforward as it simply involves covering the pole (specific to KP-100/100B), making setup easy. ■Retrofit Installation on Existing Poles It is easy to retrofit onto existing pole installations. Additionally, it supports back-to-back installation of sensors. *For new installations, a pole is required. Beam direction: within 140°. ■Compatible Models - PXB-HFA series - PXB-F series - PXB-100SW - PXB-TE series - PB-TE series - PB-FZ series - PB-F series - PB-IN-HF series - PB-IN-100AT - BUS-XF series - BUS-XT series *Please use the included lock spacer when installing the sensor.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Housing case (1 piece) KH-120VS

An infrared sensor storage case that excels in aesthetics and can be installed in any location.

■ Discreet vigilance is possible By adopting invisible colored acrylic pipes inside and placing the frame entirely on the inside, the installation position and direction of the sensors are not discernible. ■ Strong design with excellent durability It is resistant to impact and has outstanding durability, allowing for long-term use. The material primarily consists of steel plates with plating and painting, while bolts are made of stainless steel. ■ Flexible setting of the vigilance network Single beam, double beam, and four-stage beam infrared sensors can be used, allowing for linear and loop vigilance. Additionally, the height of the sensor installation can be adjusted, enabling optimal vigilance network settings tailored to the installation location. ■ Customization beyond standard specifications By modularizing the internal structure of the housing, it is designed to accommodate the storage of microwave sensors, solar cell units, and more. ■ Compatible models - PXB-HF-KH series - PXB-HFA series - PXB-F series - PXB-TE series - PXB-100SW - BUS-XF series - BUS-XT series - PB-IN-HF series - PB-FZ series - PB-IN-100AT

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Housing case (1 piece) KH-160VS

An infrared sensor storage case that excels in aesthetics and can be installed anywhere.

■ Discreet vigilance is possible By adopting invisible colored acrylic pipes inside and placing the entire frame on the inside, the installation position and direction of the sensors are not discernible. ■ Strong design with excellent durability It is resistant to impact and has outstanding durability, allowing for long-term use. The material mainly consists of galvanized and painted steel plates, with stainless steel used for bolts. ■ Customizable vigilance network Infrared sensors of single beam type, double beam type, and four-stage beam type can be used, allowing for linear and loop vigilance. Additionally, the height of the sensor installation can be adjusted, enabling the optimal configuration of the vigilance network according to the installation location. ■ Capable of accommodating specifications beyond standard By modularizing the internal structure of the housing, it is designed to also accommodate microwave sensors, solar cell units, and more. ■ Compatible models - PXB-HF-KH series - PXB-HFA series - PXB-F series - PXB-TE series - PXB-100SW - BUS-XF series - BUS-XT series

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Housing Case KH-70ST

For more details, please refer to the basic information.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

製品を詳しく見る

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Housing Case KH-120ST

For more details, please refer to the basic information.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

製品を詳しく見る

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Combination Sensor COM-50XTL

A composite sensor that integrates infrared (dual beam opposing type) and microwave (opposing type).

■Strong against harsh environments (Composite sensor) The composite type integrates a two-stage beam infrared sensor and a 24GHz microwave sensor, reducing malfunctions during adverse conditions such as fog, snow, and heavy rain. *The 24GHz microwave sensor complies with the domestic radio law as a "specific low-power radio station, radio equipment for mobile detection sensors," so no application for a radio station license or any other procedures are required on the customer's side. ■Strong against lightning (Enhanced lightning protection) Surge resistance has been strengthened to reduce damage from induced lightning. *This does not guarantee protection against failures or malfunctions caused by lightning strikes. ■Two models: "L" type and "H" type The microwave section has two frequency types: "L" type and "H" type. This prevents mutual interference when multiple units are installed directly on the line. *The infrared section can switch between four modulation frequencies using the function setting switch. ■Strong against stray light (Dual modulation method) By adopting our unique dual modulation method in the infrared sensor, we enhance the ability to distinguish between stray light (such as sunlight and car headlights).

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Glass Breakage Sensor GS-2000

Sharp detection performance! Slim-shaped ultrasonic glass break sensor.

■Features This is an ultrasonic sensor that detects the unique ultrasonic waves generated when plate glass, such as windows, is broken, and outputs an alarm signal. It is specifically designed for unmanned surveillance. ■Reliable Glass Break Detection It sharply picks up the unique ultrasonic waves generated during glass breakage and accurately processes the signals according to frequency and sound pressure. It shuts out external noise. ■Environmental Check Function It is equipped with a mode switch and indicator light that make it easy to check the installation environment and confirm operation. ■Easy Installation and Versatile Placement ● The surveillance area can be adjusted, with a maximum vertical range of 8m and a horizontal range of up to 7m, and a wide variable range of 30°, allowing for easy installation on ceilings. Additionally, being a non-contact type, it can monitor multiple pieces of plate glass without compromising aesthetics, making installation and maintenance easy. ● As it is passive, multiple units can be installed in the same space. ● Its slim shape allows it to be installed in narrow spaces between windows and curtains or blinds.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Glass Breakage Sensor Piezoelectric Type Straight Code GS-02

Touch-type glass break sensor with one-touch "memory reset" function.

■Proven High Reliability Detection Performance It captures only the specific vibration frequency generated when glass is broken, thanks to the piezoelectric element and filter amplifier, and does not respond to vibrations or impacts from wind or vehicles. ■Voltage-Free Relay Contact Output As it is a voltage-free relay contact output type, there is no need for cumbersome external controllers or relays. Additionally, it is possible to connect other sensors (b contacts) to the same circuit. (Contact operation is one-shot for about 2 seconds.) ■Two Types of Lead Wires Two types are available: straight cable (GS-02, lead wire 50cm) and coiled cable (GS-02C, lead wire 18.5cm, fully extended 130cm), allowing for flexible usage as needed. ■Simple Design With a diameter of 37mm and a thickness of 15mm, it features a compact and simple design, adopting a calm gray color that does not create a sense of incongruity wherever it is installed. ■One-Touch Memory Reset Function Memory reset is possible simply by short-circuiting the reset terminal on the front of the sensor with a conductive object, without operating the power switch. (Resetting can also be done by operating the power switch.)

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Shutter sensor, near-infrared reflective type, indoor shutter, PR-S3

Infrared shutter sensor equipped with alarm memory function.

■Alarm Memory Function When the sensor is triggered, the memory indicator will blink for 3 minutes and then remain lit for 47 minutes due to the built-in timer, allowing you to easily identify which sensor has been activated even if multiple sensors are connected to the same line. ■Highly Reliable Double Beam System Our unique double beam system significantly reduces the effects of shutter rattling, small animals like insects, and reflected light from the shutter surface. It reliably detects forced entry and destruction of the shutter. ■Operation Indicator Output Point With the operation indicator output point, you can confirm the sensor's operation from outside when the sensor is installed inside the shutter roll-up case. ■Cuts Out Radio and Electrical Noise Thanks to our unique circuit and mechanical design, we provide high-level noise resistance. ■Flexible Installation According to the Site The built-in arm allows for easy adjustment of the distance and height between the sensor and the reflective sheet. ■Sensitivity Indicator Light If the sensitivity decreases to a certain level due to dirt on the sensor front or reflective sheet, the sensitivity indicator light will turn on to alert you for maintenance.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Shutter Sensor Magnetic Modulation Type SH-M5

Equipped with an alarm memory function, a magnetic shutter sensor that is not affected by external environmental factors.

■Alarm Memory Function When the sensor is triggered, the memory indicator will blink for 3 minutes and then remain lit for 47 minutes due to the built-in timer, allowing you to easily identify the triggered sensor even when multiple sensors are connected to the same line. ■Cancellation of External Magnetic Field Influence Equipped with an adjustment function that cancels various external magnetic influences. It reliably detects forced entry and destruction of shutters. ■Completely Unaffected by External Environmental Influences Since it uses magnetic modulation, it is not affected at all by small animals like spiders and moths, dust and dirt, condensation, freezing, or stray light. It can be used safely in cold or hot and humid environments. ■Cuts Out Radio and Electrical Noise Influence Thanks to unique circuit and mechanical designs, it has a high level of noise resistance. ■Adoption of Special Magnet Sheet No need to worry about changes in magnetic force over time or detachment from the shutter slat. It uses a special sheet with high magnetic retention, excellent weather resistance, and flexibility to adhere to curved surfaces. ■Installation Adaptable to the Site With the built-in arm, you can freely adjust the distance and height between the sensor and the magnet sheet.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Terminal Box D7K-F20

It is a fence sensor that detects intruders from the perimeter fence and conducts security measures.

■Monitoring the entire fence (net part) with a surface surveillance method By adopting a surface surveillance method, more stringent security is possible. It is also an optimal sensor for dual surveillance when used in conjunction with infrared sensors at critical facilities (such as power plants). ■Not affected by snow, dense fog, or frost This sensor is ideal for installation locations where infrared surveillance is difficult. ■Simple hardware configuration The simple configuration allows for the construction of systems tailored to customer requirements. ■Reduction of construction costs and shortening of construction periods By simply securing the sensor cable directly to the fence with cable ties (included), costs can be reduced, and construction periods can be shortened.

企業：セキュリティハウス
価格：Other

Other security and surveillance systems
Electric lock

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Electric lock - メーカー・企業105社の業務用製品ランキング | イプロスものづくり

Electric lockのメーカー・企業ランキング

Electric lockの製品ランキング

Electric lockの製品一覧

Wandering Notification Tatsu-kun (Portable Receiver) HS-WK(KE)

Wandering Notification Detection Device - Desktop Receiver Set HS-103(T)

Wandering Notification Haruo-kun HCS-CS30(T)

Multifunctional Emergency Notification Device HEC-610

Emergency Call Set Portable Receiver Set ECS-1P(KE)

Emergency Call Set Installation Type Receiver Set ECS-1P

Emergency Call Set Receiver Portable Set EC-B(KE)

Wireless Foot Call HCS-FC1(T)

Human Motion Sensor (Exposure Type) HM-1B

Toilet Sensor (Exposed Type) TS-7

Toilet Sensor (Exposed Square Type) TS-7R

Area Setting Remote Control TS-A

Life Safety Sensor, Exposed Type, SA-750

Life Safety Sensor Embedded Type SA-750U

Life Sensor Display Panel SSH-5

Life Sensor Display Panel SSH-10

Channel Display Panel CHT-4

Channel Display Panel CHN-5(F)

Channel Display Panel CHN-10(F)

Housing-type pole cover (1 piece) BP-100KP

Housing case (1 piece) KH-120VS

Housing case (1 piece) KH-160VS

Housing Case KH-70ST

Housing Case KH-120ST

Combination Sensor COM-50XTL

Glass Breakage Sensor GS-2000

Glass Breakage Sensor Piezoelectric Type Straight Code GS-02

Shutter sensor, near-infrared reflective type, indoor shutter, PR-S3

Shutter Sensor Magnetic Modulation Type SH-M5

Terminal Box D7K-F20

Electric lockに関連する検索キーワード

Electric lockの関連カテゴリ