Last Updated： Aggregation Period:Sep 10, 2025～Oct 07, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 10, 2025～Oct 07, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 10, 2025～Oct 07, 2025
This ranking is based on the number of page views on our site.
16～30 item / All 44 items
We respond to a wide variety of needs with reliable processing technology cultivated over many years in the chalk series (powder handling equipment).
The installation of the tube (sleeve) involves pushing the PP resin ring (sleeve) into the flange groove for setting, and removal is simply done by pulling it out. The installation and removal are extremely easy and straightforward.
In addition to standard materials, we can also accommodate SUS316, SUS316L, S25C, PVC, and others.
"F Flex" is a spherical rubber flexible joint. It has excellent vibration absorption, pipe expansion and contraction, and displacement absorption, providing outstanding vibration isolation and pressure resistance. The standard product uses JIS 10K flanges. Flanges of various standards such as JIS 5, JIS 20, drinking water, JPI, and ANSI are also available. 【Features】 ■ Compatible with various standard flanges such as JIS 5, JIS 20, drinking water, JPI, and ANSI ■ Flange materials include standard SS400 and SUS304, as well as SUS316, SUS316L, S25C, and PVC ■ Available in hot-dip galvanized and painted options ■ Tie rod bolts can also be manufactured *For more details, please refer to the PDF document or feel free to contact us.
Standard products use JIS 10K flanges! They have excellent heat resistance and chemical resistance!
"DL Flex" is a spherical flexible joint coated with synthetic rubber on the outer surface of fluororesin. The contact part is made of fluororesin, which provides excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stick characteristics. The flange materials can accommodate not only standard SS400 and SUS304, but also SUS316, SUS316L, S25C, and PVC. 【Features】 ■ Compatible with various standard flanges such as JIS5, JIS20, drinking water, JPI, ANSI, etc. ■ Flange materials can accommodate not only standard SS400 and SUS304, but also SUS316, SUS316L, S25C, and PVC. ■ Available in unichrome plating and painted options. ■ Tyrolit bolts can also be manufactured. *For more details, please refer to the PDF document or feel free to contact us.
It is a tubular flexible joint with a straight inner surface, so it does not accumulate liquid!
The "TF Joint FXS" is a cylindrical flexible joint coated with synthetic rubber on the outer surface of fluororesin. The contact part is made of fluororesin, which offers excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stick characteristics. Additionally, the inner surface is straight, preventing liquid accumulation. 【Features】 ■ Compatible with various standard flanges such as JIS5, JIS20, drinking water, JPI, ANSI, etc. ■ Flange materials can include standard SS400 and SUS304, as well as SUS316, SUS316L, S25C, PVC, etc. ■ Options for electro-galvanized and painted products are also available. *For more details, please refer to the PDF materials or feel free to contact us.
Flexible joint with a flexible inner flat structure.
The "SF-JOINT" features an inner flat structure, allowing for smooth flow and preventing the buildup of sediment. Additionally, the flexibility of the thermoplastic elastomer used in the body material is demonstrated, providing excellent flexibility. Since a reinforcing ring (glass fiber-reinforced PP plastic) is attached to the body, the product maintains its circular shape without bending or flattening when flexed. 【Features】 ■ Inner flat structure ■ Ensures flexibility ■ Maintains circular shape (roundness) *For more details, please download the PDF or feel free to contact us.
What is a flexible joint?
A flexible joint, as the name "flexible" suggests, refers to pipes and fittings that can be used flexibly according to various environments in manufacturing sites. This article explains the characteristics, main applications, usage locations, and types of flexible joints. *For more details, please refer to the related link page or feel free to contact us.*
[Example of Use] Strong against tearing! The effectiveness of silicone duct tape.
The ST Duct Band is a product that replaces currently used materials such as canvas and nylon tarpaulin. It excels in elasticity and flexibility, which significantly extends its lifespan. 【Examples of Use】 The ST Duct Band has been adopted at the joint sections of supply and discharge points of vibrating conveyors in powder and granular material transport lines. Products made from urethane, rubber, and canvas that are tubular in shape tend to break easily due to vibrations, and if even one crack occurs, it can lead to total loss and force the line to stop. The ST Duct Band is resistant to tearing, so even if it does tear, it results in only a minimal leak. Its translucent nature allows visibility of the product flow, helping to prevent blockages. *For more details, please contact us or refer to the catalog.
The liquid contact part is made of fluororesin, which has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness.
"DL-FLEX" is a spherical flexible joint coated with synthetic rubber on the outer surface of fluororesin, handled by Chūnichi Giken Kōgyō Co., Ltd. Since the liquid-contacting part is made of fluororesin, it excels in heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum operating temperature: 100°C (However, this may vary depending on usage conditions.) ■ If the fluid is a gas, the maximum operating pressure will change, so please inquire. (1) It cannot be used in locations such as the delivery side of pressurized water pumps where pressure fluctuations occur frequently. (2) Due to the material properties, there is a possibility of reduced sealing performance. In this case, please perform additional tightening or use a gasket. *For more details, please refer to the PDF document or feel free to contact us.
The liquid contact part is made of fluororesin, which has excellent heat resistance and chemical resistance, while also possessing properties such as water repellency, oil repellency, and non-stickiness.
"T-FLEX C" is a cylindrical flexible joint covered with synthetic rubber on the outer surface of fluororesin, handled by Chūnichi Giken Kōgyō Co., Ltd. The inner surface is a corrugated hose, allowing it to accommodate a large amount of eccentricity. 【Usage Range】 ■ Maximum operating pressure: 1.0 MPa (However, this may vary depending on usage conditions.) ■ Maximum operating temperature: 100°C (However, this may vary depending on usage conditions.) ■ If the fluid is gas, the maximum operating pressure will change, so please contact us. * If used beyond the maximum operating pressure (1.0 MPa), we will conduct a separate structural review, so please contact us. (1) It cannot be used in locations such as the delivery side of pressurized or booster water pumps, where pressure fluctuations occur frequently. (2) Due to the characteristics of the material, there is a possibility of reduced sealing performance. In this case, please perform additional tightening or use a gasket. * For more details, please refer to the PDF document or feel free to contact us.
If you want to absorb the vibrations around the pump...
This is a flexible joint for the Ministry of Land, Infrastructure, Transport and Tourism / various government agencies specifications.
Excellent vibration-proof and pressure-resistant rubber flex!
High quality, low price, short delivery time. *Delivery time varies depending on length and quantity.
Attention facility managers of school air conditioning systems. "Reflex" is a regularly stocked item, so we can respond to urgent construction needs! The introduction to public schools is steadily progressing!
The installation of air conditioning systems in public elementary and junior high schools has become urgent, and the government has announced the installation of air conditioning systems in all (public) elementary and junior high schools. The cost has been included in the government budget. Due to the low height and long horizontal layout of school buildings, it is common to have expansion joints, which help minimize damage to the structure from external forces such as earthquakes by dividing the building's framework. The Ministry of Land, Infrastructure, Transport and Tourism's "Standard Specifications for Public Building Construction" mandates the use of flexible joints for piping that passes through expansion joints. The demand for Reflex, which complies with these piping guidelines and ensures the proper use of joints, has surged, and it is being rapidly introduced in public schools as well. [Delivery records have been published.] *For more details about the product, please refer to the PDF document or feel free to contact us.*
It is a clean flex for medical gas piping.
This is a product that meets the performance and requirements required for medical gas piping, which is an extremely important lifeline. It has undergone degreasing treatment on both the inner and outer surfaces, making it hygienic. *For more details about the product, please refer to the PDF document or feel free to contact us.*
Flexible joints compliant with the Ministry of Land, Infrastructure, Transport and Tourism's piping guidelines. Please use them for absorbing displacement in expansion joint sections, seismic isolation layers, and vertical pipes.
The installation of air conditioning systems in public elementary and junior high schools has become urgent, and the government has announced that it will install air conditioning systems in all (public) elementary and junior high schools. The costs have been included in the government budget. Due to the low height and long horizontal layout of school buildings, expansion joints are often installed. This is because dividing the structure can minimize damage to the building caused by external forces such as earthquakes. The piping guidelines in the Ministry of Land, Infrastructure, Transport and Tourism's "Standard Specifications for Public Building Construction" mandate the use of flexible joints for piping that passes through expansion joints. As a result, the demand for Reflex, which complies with these piping guidelines and ensures the proper use of joints, has surged, and it is being rapidly introduced in public schools as well. [Please see our delivery records.] Additionally, Reflex is usually in stock, so it can accommodate urgent construction needs. *For more information about the product, please refer to the PDF materials or feel free to contact us.
We are using MT rubber, which can also be used with water supply lines, instead of standard rubber.
This product is a synthetic rubber cylindrical vibration isolator from the flexible joint (synthetic rubber vibration joint) series. It comes standard with JIS 10K flange (SS400) and can be modified for JIS 20K and water supply applications. The rubber material is MT rubber (chlorine-resistant rubber), and specifications for length (L) can also be accommodated. 【Features】 ■ Absorbs displacements such as eccentricity and angular displacement ■ Minimal dimensional changes under internal pressure loads ■ Made of MT rubber ■ Compliant with the Ministry of Land, Infrastructure, Transport and Tourism specifications *For more details, please refer to the PDF document or feel free to contact us.
