Last Updated： Aggregation Period:Oct 14, 2026～Nov 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 14, 2026～Nov 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 14, 2026～Nov 10, 2026
This ranking is based on the number of page views on our site.
301～330 item / All 424 items
Portable telescopic sky pole made by Nippon Antenna.
●C-SP-5 (CSP5) is a portable sky pole (telescopic) made by Nippon Antenna. ●It is an easy-to-carry telescopic portable sky pole. ●The length is approximately 5.1m when extended and about 1.7m when shortened. ●It is used with an antenna attached. *For more details, please feel free to contact our company.*
A radio repeater that effectively expands the communication area and resolves dead zones where signals could not reach between digital simple radios.
● The TCB-D239CR (TCBD239CR) is a UHF simple radio relay station (licensed station) manufactured by JVC Kenwood. ● It is a digital simple radio licensed station 3D. It belongs to the digital simple radio system NEXEDGE CR series. ● By relaying the TCB-D239CR, JVC Kenwood's digital simple radio licensed stations TCP-D261BTE / TCP-D261E, TCP-D751 CT, TCM-D244E CT, and NX-330EXE CT can expand the communication area. ● It supports ARIB STD-T98 (version 2.0) for relay use with 10 pairs of channels. ● The transmission power can be set from 5.0W to 1.0W (default setting is 5.0W). ● It has a compact size that allows for mobile operation. ● It features a 1.71-inch OLED display. ● Equipped with a thermal control cooling fan for stable operation. ● It includes a USB Type A port for audio accessories. ● Status monitoring, remote operation, and firmware updates are possible via web tools. *For more details, please refer to the PDF document or feel free to contact us.*
Portable tire-mounted simple mast base manufactured by Daiichi Denpa Kogyo (DIAMOND).
● TMB is a portable tire-mounted simple mast base made by Daiichi Denpa Kogyo (DIAMOND). ● It serves as a base for securing the antenna of a radio device. ● It is used in combination with a separately sold pole (mast) and is compatible with mast diameters from Ø25 to Ø50mm. ● The mast base can be easily secured by driving a vehicle over it. ● Using the portable antenna mast AM385 allows for convenient mobile operation. ● It features a mast tilting mechanism. ● The metal parts are finished with hot-dip galvanized coating, making it resistant to rust. *For more details, please feel free to contact us.*
Bluetooth bone conduction headset for U-BOX AT remote support wearable camera.
● ASC100BK (ASC-100-BK) is a Bluetooth bone conduction headset made by Shokz. ● It is designed for the remote assistance wearable camera U-BOX AT. ● When using it in conjunction with the U-BOX AT main unit and the helmet visor-mounted camera ST#7CAM-03U or ST#7CAM-04U, a Bluetooth bone conduction headset is required for audio transmission and reception. ● It connects via Bluetooth to the "Windows version" of the U-BOX AT main unit and shared terminals of the LW model. *For more details, please contact our company.*
Manual coaxial switch with one circuit and two contacts used for switching high-frequency signals.
● The CX210N (CX-210N) is a coaxial switch (1 circuit, 2 contacts) manufactured by Daiwa. ● It is a manual coaxial switch with 1 circuit and 2 contacts used for switching high-frequency signals. ● It is used when connecting multiple antennas to a radio or for switching between multiple radios. ● The input/output connector is N-J. ● It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.*
Manual coaxial switch with 1 circuit and 3 contacts used for switching high-frequency signals.
The CX310A (CX-310A) is a coaxial switch (1 circuit, 3 contacts) manufactured by Daiwa. It is a manual coaxial switch with 1 circuit and 3 contacts used for switching high-frequency signals. It is used when connecting multiple antennas to a radio or for switching between multiple radios. It has good isolation with no coupling or induction between terminals. It has a high power tolerance and does not generate heat. The center conductor of the connector is gold-plated. The body is made of robust zinc die-cast. The input/output connector is M-J. It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.
Manual coaxial switch with one circuit and two contacts used for switching high-frequency signals.
●CX210A (CX-210A) is a coaxial switch (1 circuit, 2 contacts) manufactured by Daiwa (Diamond). ●It is a manual coaxial switch with 1 circuit and 2 contacts used for switching high-frequency signals. ●It is used when connecting multiple antennas to a radio or for switching between multiple radios. ●The input/output connector is M-J. ●It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.
![[Supports LTE+ Wireless LAN] IP Transceiver IP510H](https://image.mono.ipros.com/public/product/image/862/2001241713/IPROS7670093484321438138.jpg?w=280&h=280)
The successor model of the highly acclaimed IP transceiver "IP500H Series," which supports communication via wireless LAN in addition to LTE connections.
The IP510H (IP-510H) is an IP transceiver (LTE + WLAN compatible) manufactured by Icom. It is the successor to the well-known "IP500H series" of IP radios (LTE radios). In addition to the basic functions of the previous models IP500H, IP501H, and IP502H, it includes the following new features: - WLAN compatible standards: IEEE802.11 b/g/a/n/ac - Compatible with WPA3, allowing connection to networks with high-level security environments - Supports Bluetooth PTT (only SPP) - Allows battery replacement without turning off the power while charging via USB Type-C In addition to the functions of the IP502H, it supports wireless LAN (WLAN). With WPA3 compatibility, it can connect to networks with high-level security environments, and can communicate via Wi-Fi (internet) when outside the LTE coverage area. It supports wireless LAN (WLAN) in addition to the functions of the IP502H. *For more details, please feel free to contact us.
Utilized for power management and monitoring of equipment.
● XE1151 (XE-1151) is a power management and monitoring system for equipment manufactured by Alinco. ● It can be utilized for power management and monitoring of equipment. ● XE1151 can notify changes in the status of AC power outages and live power via Sigfox. It can continuously monitor power supply and outages. ● XE1151 can detect the opening and closing of doors and windows and send this information via Sigfox to notify about their status. ● XE1151 can send alerts for temperature controllers via Sigfox to inform about temperature anomalies. ● XE1151 can remotely notify about alarm bell ringing and rotating light activation via Sigfox.
Programming cable for connecting a radio and a PC.
●OPC-478UD (OPC478UD) is a programming cable made by ICOM. ●If you need a USB driver, please download it from the ICOM website. ●It is used to configure the radio equipment with a computer. ●It can be used with IP transceivers IP502H, IP501H, IP500H, IP510H, and wireless LAN transceivers IP100H/IP100FS/IP1000C. ●It is a successor to OPC-478UC-1.
Base for carrier pipe (foldable) made by Daiichi Denpa Kogyo (DIAMOND).
The K540 (K-540) is a carrier pipe base (foldable) manufactured by Daiwa (Diamond). It is an antenna base used for mounting antennas on vehicle side mirror pipes, carrier pipes, and railings of apartments or housing complexes. The compatible pipe diameter is Φ15 to Φ25mm. Please use it in combination with separately sold antenna elements. It is designed to match the Super Gainer series, but can also be combined with other antennas. Angle adjustment is possible. It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.
User-friendly communication receiver with an easy-to-use numeric keypad, perfect for beginners.
The DJ-X82 (DJX82) is a communication receiver with a keypad manufactured by Alinco. It is an easy-to-use receiver for beginners, equipped with a keypad. The charging and external power terminal is USB TYPE-C, allowing for USB charging. It features "Quick Memory" and "Quick Search Pass" banks with 200 channels each. With simple operations using the dial, you can skip noise while searching and temporarily store found signals, making it easy to move them to the conventional bank. It includes a selectable sound & silent simple bug detection mode. A free editing software that allows memory registration and set mode configuration (available for download from the Alinco website) can be connected to a PC using the included USB cable for settings. It can receive AM/FM and FM broadcasts from 76-108 MHz on a separate circuit. You can register the conditions for program scanning by pairs, allowing you to search the same band with different steps and modes. *For more details, please refer to the PDF document or feel free to contact us.
F.R.C manufactured specific low-power transceiver NX-20X / NX-20R / rechargeable battery for disaster prevention radio NX-W109RD
● The NX-20BT (NX20BT) is a lithium-ion rechargeable battery manufactured by F.R.C Co., Ltd. ● It is a rechargeable battery for the specific low-power transceivers NX-20X / NX-20R / FC-S22 and the disaster radio NX-W109RD made by F.R.C. ● The battery capacity is 1000mAh. ● The battery is charged using the charger NX-20BC while installed in the transceiver, or with the connecting AC adapter FC-ZXPROLC and the connecting AC adapter FC-AC01. ● The battery life is approximately 24 hours when used with the NX-20X. * This is an estimated time based on using the fully charged battery with a low-frequency output rating of 400mW, transmitting for 10 seconds, receiving for 10 seconds, and waiting for 80 seconds in a repeating cycle. ● The charging time is approximately 3.5 hours. * For more details, please feel free to contact us.
![[Headset Microphone (Explosion-Proof)] EHS27-Ex](https://image.mono.ipros.com/public/product/image/b4a/2001432924/IPROS15911492027348114682.jpg?w=280&h=280)
UL explosion-proof rugged commercial smart device PNC460U tie pin microphone + earphones
The EHS27-Ex (EHS27Ex) is an explosion-proof earphone microphone made by Hytera. It is a tie-pin microphone + earphone for the robust UL explosion-proof commercial smart device PNC460U. *Please note that it is for UL explosion-proof use and not for the non-explosion-proof PNC460. *It is compatible with UL explosion-proof standards. *For more details, please feel free to contact us.
Earphone microphone for portable transceiver WX-CT200
● The WX-CM210 (WXCM210) is a talk microphone made by Panasonic. ● Earphones (3.5φ) are also included. The earphones come with three types of ear tips (large, medium, small). ● This is an earphone microphone for the portable transceiver WX-CT200. ● It connects to the WX-CT200 using the included transceiver connection cable. The connection cable has a coiled section, making it less likely to break even if it gets snagged. ● The microphone is a bidirectional electret microphone. ● There is a clip on the back of the microphone that allows it to be attached to clothing. ● The microphone itself is compact and lightweight, weighing about 17g (approximately 20g including the windscreen), so it is not burdensome to wear. ● A windscreen is also included to prevent wind noise. *For more details, please feel free to contact us.
This is the BX4-AMCS1 centralized charging station that can charge 8 BONX BOOST Full Packs simultaneously.
The WX-CR200 (WXCR200) is an antenna station manufactured by Panasonic. It is an antenna unit for the Panasonic J-DECT compliant 1.9GHz band digital wireless intercom system (multi-party simultaneous communication intercom). Up to 100 portable transceiver units WX-CT200 can be wirelessly connected to a single antenna station. It can be installed on the ceiling or wall and connected to the separately sold center unit WX-CX200 using a CAT5/CAT5e/CAT6 straight cable. The wiring distance between the WX-CX200 and WX-CR200 can be up to 200 meters. A single center unit WX-CX200 can connect up to 12 antenna stations. It comes with two omnidirectional antennas (external). The reception method is diversity reception.
Center microphone for J-DECT compliant 1.9GHz band digital wireless intercom system (multi-party simultaneous communication intercom).
● The WX-CM200 (WXCM200) is a center microphone manufactured by Panasonic. ● It is a center microphone for the Panasonic J-DECT compliant 1.9GHz digital wireless intercom system (multi-party simultaneous communication intercom). ● It connects to the separately sold center unit WX-CX200 using a CAT5/CAT5e/CAT6 straight cable. The wiring distance between the WX-CX200 and WX-CM200 is up to 50m. ● By connecting to the center unit WX-CX200, two-way communication with the portable transceiver WX-CT200 is possible. Individual calls can also be made. ● An amplifier-equipped speaker can be connected for audio confirmation. ● The power supply is DC24V, provided from the center unit WX-CX200. *For more details, please feel free to contact us.*
Wireless headset with built-in noise cancellation for app-compatible helmets.
The EME-90WNC (EME90WNC) is a wireless headset for helmets made by Alinco, equipped with noise cancellation and compatible with app radios. It pairs with a smartphone (or mobile device) that has the wireless app Air-InCom (ACP-100 / ACP-101) or Air-InCom Lite (ACP-100L / ACP-101L) installed via Bluetooth 4.2. It is designed to be mounted on a helmet. The PTT button is large enough to be used even while wearing gloves. The PTT button switches between sending and receiving. If the app is set to PTT hold, pressing the PTT key once initiates a call, and pressing it again ends the call, allowing for hands-free operation. It can also respond to regular phone calls coming in on the smartphone when not in an app call. It features high-performance noise cancellation, allowing for clear voice communication by canceling surrounding noise.
A compact dual-band beam antenna for 144/430MHz band, usable from mobile to fixed applications.
The A1430S8 (A1430-S8) is a dual-band 8-element beam antenna for the 144/430MHz band manufactured by Daiwa. It is a compact dual-band beam antenna for 144/430MHz that can be used for both mobile and fixed applications. It supports the 144/430MHz band with a single feed point. It is small and lightweight, weighing only 1.2kg. No tools are required for mast installation. *For more details, please feel free to contact us.*
Charging dock for Hytera's rugged commercial smart device PNC460.
●CH20L20 (CH20-L20) is a desktop charger manufactured by Hytera. ●It is a charging dock for the rugged business smart device PNC460 from Hytera. *Note: It is not for explosion-proof use, so it cannot be used with the UL explosion-proof PNC460U. ●It has two charging pockets, allowing for the charging of two devices. ●It is used in combination with the power adapter PS2022 and the USB Type-C cable PC143. ●It can be charged from a household power supply of AC100V. ●It supports charging for lithium-ion and lithium-polymer batteries. ●The output is 5V/2A, 9V/2A, and 12V/1.5A. ●It complies with the European environmental regulation RoHS directive. ●The charging time is approximately 135 minutes. *For more details, please feel free to contact us.
A television terminal with a built-in time information radiating device that can obtain time information from terrestrial digital broadcast television signals even in areas where standard radio waves do not reach.
● WTUE7 (WTUE-7) is a television terminal with a built-in time information transmitter manufactured by Nippon Antenna. ● It is a device that uses terrestrial digital broadcast television signals to correct the time of radio clocks. ● To obtain time information from terrestrial digital broadcast television signals, it can be installed and used with the same type of work as regular indoor television wiring. ● It can automatically correct radio clocks even in places where standard radio waves do not reach, such as inside apartments, buildings, large structures, or underground. *For more details, please feel free to contact us.*
Tabletop stand microphone ideal for in-house announcements and business broadcasts.
● The MV-P370 (MVP370) is a unidirectional microphone manufactured by JVC Kenwood. ● It is an ideal tabletop stand microphone for in-house announcements and business broadcasts. ● Being a unidirectional microphone, it is effective in minimizing surrounding noise and feedback. * A directional microphone is one that picks up sound only from a specific direction. ● It is equipped with a talk button that locks when turned to the right while pressed. In the locked state, hands-free broadcasting is possible. ● There is a semi-fixed volume control on the bottom for adjusting chime volume and microphone volume. ● It is powered by a household AC power supply of AC100V using the included AC adapter. ● The connector is a φ6.3 mono phone plug. * For more details, please feel free to contact our company.
Antenna pole for installing antennas such as radios.
● The AP-10 (AP10) is a 9m antenna pole made by Nippon Antenna. ● It is an antenna pole for mounting antennas such as radios. ● Its extended length is 9m. ● Please use it in combination with the separately sold four-legged base holder (horse) BS-78 and wire rope (120M) SUS. ● When constructing the AP antenna pole, if the installation of the base holder BS-78 is unstable on the roof or similar locations, use the base pipe steering AS-63 and pre-tension the stay wire on the base pipe to secure it, allowing for safe pole extension work. *For more details, please feel free to contact our company.
Antenna pole for installing antennas such as radios.
●AP-14 (AP14) is an antenna pole (12.8m) manufactured by Nippon Antenna. ●It is an antenna pole for mounting antennas for radios and other devices. ●The length when extended is approximately 13m, and it is a 7-section pole. ●Please use it in combination with the separately sold four-legged base holder (horse) BS-78 and wire rope (120M) SUS. *For more details, please feel free to contact our company.
Antenna pole for installing antennas such as those for radios.
●AP-8 (AP8) is an antenna pole (7m) manufactured by Nippon Antenna. ●It is an antenna pole for mounting antennas such as radios. ●The length when extended is 7m, and it is a 4-section pole. ●Please use it in combination with the separately sold four-legged base holder (horse) BS-78 and wire rope (120M) SUS. *For more details, please feel free to contact us.*
Four-legged base holder made by Nippon Antenna.
● The BS-78 (BS78) is a four-legged base holder manufactured by Nippon Antenna. ● It can be combined with separately sold antenna poles AP-8 (7m), AP-10 (9m), AP-12 (10.9m), and AP-14 (12.8m). ● It is used in combination with antenna poles and stay wire ropes when installing antennas such as radios. ● When constructing with the AP antenna pole, if the installation of the BS-78 is unstable on the roof or similar locations, use the base pipe steering AS-63 and pre-tension the stay wire to secure it to the base pipe, allowing for safe pole extension work. *For more details, please feel free to contact us.*
A set of two rechargeable batteries WB-2000 for wireless microphones. Low self-discharge type nickel-metal hydride batteries that reduce environmental impact.
The WB-2000-2 (WB20002) is a rechargeable battery set (2 pieces) for wireless microphones manufactured by TOA Corporation. It contains two AA-sized nickel-metal hydride batteries (capacity 2000mAh) designed for wireless microphones. It uses a low self-discharge type nickel-metal hydride battery to reduce environmental impact. This battery is compatible with TOA models WM-D1210, WM-D1260, WM-D1310, WM-1420, WM-1100, WM-1120, WT-1100, WT-1101-C11C13, and WT-1101-C12C14. *For more details, please feel free to contact us.
A set of two rechargeable batteries WB-1000A for wireless microphones. Low self-discharge type nickel-metal hydride batteries that reduce environmental impact.
The WB-1000A-2 (WB1000A2) is a rechargeable battery set (2 pieces) for wireless microphones manufactured by TOA Corporation. It contains two AA nickel-metal hydride batteries (capacity 1000mAh) designed for wireless microphones. It uses low self-discharge type nickel-metal hydride batteries to reduce environmental impact. This battery is compatible with TOA models WM-D1210, WM-D1260, WM-D1310, WM-1420, WM-1100, WM-1120, WT-1100, WT-1101-C11C13, and WT-1101-C12C14. *For more details, please feel free to contact us.*
A whip antenna that is mounted by drilling with minimal adverse effects on the vehicle body.
The WH-450-1ND-09 (WH4501ND09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 400MHz band. It is an antenna for UHF radios. The compatible frequency range is 383.35 to 383.45MHz (receiving 399.0625 to 399.45MHz, transmitting 383.0625 to 383.45MHz). It is a whip antenna that requires hole-mount installation. Installation requires drilling. A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. This product has a mounting hole of φ16mm. It comes with an N-J connector, and the coaxial cable is sold separately. It is equipped with a ground wire, ensuring excellent electrical performance regardless of installation location, with minimal adverse effects from the vehicle body. It complies with safety standards. For more details, please feel free to contact us.
F-type antenna mounting bracket for installing a 5-element Yagi antenna in the 60MHz band.
The F-1 (Round) K2D (Set) is a mounting bracket for F-type antennas manufactured by Nippon Antenna. It is primarily used for mounting 5-element Yagi antennas in the 60 MHz band. It is installed in an arm shape. The compatible arm diameter for antennas is φ25 to φ38. The adjustable band compatible diameter range is φ300 to φ410, and the upper mast diameter range is φ300 to φ389. Antennas such as the 5-element Yagi antenna 5DV-0608 can be mounted. *For more details, please feel free to contact our company.*
